Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - ivan

Pages: 1 [2] 3 4 ... 89
16
Comments, Suggestions & Questions / Re: Hobbes (Files) Reoganization
« on: June 13, 2021, 05:47:35 pm »
Hi Martin,

I get the impression that you are your own worst enemy regarding Hobbes. (I am assuming it is you that is adding all the ancient drivers/programs for which there is no hardware).

With all the old junk cluttering up incoming it is almost impossible to see any new input unless one is looking for a specific item.  Unfortunately, I can't see a simple way round the problem unless you can talk NMSU and the person that looks after the OS/2 section to create a 'incoming\archive' section where all the old drivers/programs can be posted to, so leaving 'incoming' clear for new material.

17
Networking / Re: Arcamapper (SAMBA) loses connection
« on: May 28, 2021, 10:39:15 pm »
Double clicking on the icon representing the NAS drive and getting no response is generally due to the sleep settings of the NAS and which parts of the NAS go into sleep mode.  If it is just the disks that go into sleep mode they should start up reasonably quickly, if it is the OS plus the disks that sleep it takes rather longer.

18
Quote
I agree that the future might be 64bit. But to be honest, for me I don't see any need for 64bit as long as i can do all i need to do with my "old" 32bit system. I am not a programmer and using my pc mainly for writing and organizing office stuff. What I try to say is, that it always depends what you need an OS for and what you expect from it. I really enjoy OS/2 since it is so very comfortable to work with it and i wouldn't want to miss it. And i am really happy that AN is doing a great job to keep it alive as an OS....

As you say a 64 bit version of OS/2 is a dream, I have to ask 'what advantage would a 64 bit OS have over a 32 bit one for everyday usage?'

Like andreas I use OS/2 tor writing and editing of manuscripts, yes, I can do that on one of my Linux boxes but not as easily and it still takes the same length of time.  Also there are times when I see memory problems because the modern motherboards and uefi bios are set up for windows only and don't play well with any other OS - since I will not use windows I have learned to live with those quirks.  Even my MSI B550-A Pro board wit a third gen Ryzen processor runs OS/2(ArcaOS) on the bare metal, just wish MSI had better memory management.

19
Applications / Re: theseus 4.001 trap in usbmon
« on: May 24, 2021, 11:02:32 am »
No problem with any of my AMD processor units.  Maybe the trap is processor based since roberto, Dave and Martin are using Intel CPUs while Andreas and myself use AMD units.

20
Hi Greggory,

Other than wanting to use your old Intel Core 2 Extreme QX9650 Yorkfield CPU is there any compelling reason for using an Intel CPU for your new unit?

I gave up on Intel years ago in the days of the 486 processor and now use AMD units exclusively in any computer I build.  My latest unit is based on the MSI B550-A PRO board with an AMD Ryzen third gen processor with built in graphics which works very well with the latest ArcaOS.  Unless you insist on Intel processors I would recommend that you give AMD a try.

21
Hi Martin,

Looking at Hobbes incoming, it appears the first thing should be the opening of a new subsection of the archive called something like 'ancient software' that could have subsections of 'drivers', 'utilities' and so on.  My reasoning for that is someone new to OS/2 will not be deluded into thinking the old drivers will work on new hardware and conversely, someone with very old hardware would have a better hope of finding things that will work.

Your idea of creating a total backup of the OS/2 section is excelent but it should be ready to take over at a moments notice should the NMSU authorities decide to close that section down.

All of us should be very thankful that the University has kept the OS/2 section going but we shouldn't expect them to keep it up for ever.   

22
Programming / Re: Installing Prominaire Designer
« on: April 29, 2021, 01:32:59 am »
Hi Mike,

Like Pete I don't know the program but I suspect your problem is down to missing DLLs that the installer put in the os2\dll directory.

Am I correct in assuming you don't have a floppy drive so you can't install from the floppies, if so, all is not lost.  You can download vfdisk60.zip from hobbes which will give you a virtual floppy disk that you can copy the contents of each floppy to from each of your install directory, and use that to do the install.

If you have each floppy as a disk image you will need to unpack them to the virtual floppy.  The easiest way to do that is to use EMT4PM from Daniel F Valot's site http://dvalot.free.fr/OS2programs.html  that program will also make disk images.


23
Setup & Installation / Re: Booting with NVMe
« on: April 26, 2021, 05:55:04 pm »
Hi Matt,

Although I don't have a NVMe on my MSI B550 (Ryzen third gen) I do have an M-2 SATA stick that I boot from and found out very early that I needed to set that M-2 slot as the first bootable drive in the bios.  If I didn't do that it would try and boot from any other drive on the system, all 5 plus the DVD, but never try the M-2 slot.

At some stage I will add an NVMe stick to the second M-2 on that board and see what happens - maybe use one as a fall back boot system.

24
Utilities / Re: QT5 Runtime
« on: April 23, 2021, 07:05:43 pm »
I too have downloaded all the QT5 rpm files and unpacked them and found a few DLLs but now according to Neil we enter DLL hell where one DLL will work with one program but no others.

I started out trying to run the latest version of Tea-60.0.3-1 which appears to have gone from QT4 to QT5.  I eventually found the missing DLLs (not mentioned in the zip file) whereupon it threw a wabblie and refused to work - I assume that is because a DLL has changed from when the OS/2 version was produced NOT GOOD.

25
Utilities / Re: QT5 Runtime
« on: April 21, 2021, 11:16:45 pm »
Hi Dariusz,

Been there , done that no joy - I do not want or need umpteen *.h files or other junk which I know not what to do with,  I just want a simple runtime package like that for QT4.

@ Neil,

Sorry , don't have that running because there is no set of required DLLs available - I just want a simple zip with all the necessary DLLs, is that too much to ask?  Will accept a .wpi or as a last resort a .rpm.

26
Utilities / QT5 Runtime
« on: April 21, 2021, 06:28:08 pm »
Maybe I am not looking in the right place but I can't find the QT5 runtime package.

I assume there has to be one, we do have one for QT4.   Since most developers want to show their ability and would have assembled one as soon as possible if only to show off what they can do  BUT the question is where is it hiding.

Don't tell me that I have to download a load of programming junk that I will never use just to get bits from each package that might eventually allow me to put together a QT5 runtime, that is just stupidity.

Rant over.  Having spent the last few hours looking and finding a blank wall I am beginning to wonder just where OS/2 is going.

27
Hardware / Re: Keyboard special keys on OS/2-ArcaOS
« on: April 19, 2021, 01:44:36 am »
A lot depends on what the keyboard firmware says it needs.  For example, my Corsair K95 either runs with full firmware in use so enabling the 18 extra function keys or in 'bios' mode which only operates the standard keyboard functions.

Attached is the readme from the Linux port which should give some idea what is involved.

28
Hi Dave,

For me moving over to multi core processors with built in graphics resulted in a total system lockup, big reset button time.  After the fifth lockup I resurrected one of my old comps and it ran on there with no problems as it had before.

Sorry I can't be more helpful.

29
Hardware / Re: Keyboard special keys on OS/2-ArcaOS
« on: April 17, 2021, 04:05:09 pm »
The big part of the problem is how win 10 messes with USB keyboards and the keyboard manufacturers are pandering to the win program.

The 'bios compatible' switch just switches off all the extra 'features' and leaves a standard set of keys that do work on any operating system but they would like you to use win as the OS.

30
Hi Dave,

It would be good if you did manage to port QEMU I could then stop having several computers running at once ;)

There are the zip files for the version that used to work for me on https://ecsoft2.org/qemu  it has a patches dir but since it is from 2009 I don't know if they would be of any use with the present version.

Pages: 1 [2] 3 4 ... 89