Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 2 [3] 4 5 ... 55
31
Applications / Re: ArcaOS 5.1 - First Impressions
« on: January 01, 2024, 08:24:08 pm »
No, I don't have startup.cmd in my system. I only use the startup folther
saludos
modify: attach the xwptrap.log

32
Applications / Re: ArcaOS 5.1 - First Impressions
« on: January 01, 2024, 07:36:27 pm »
You got the freezes during startup or when ArcaOS was loaded and you loaded a program ?
In both cases, it sometimes hung on the boot. And other times it would hang during use with other apps open. Now it doesn't hang.

Small log after install the system:
Modify the virtualadrres to 3072, previus 1536
Modify the screen, from 1920x1080 16M   to   1920x1080 64k
Modify the screen, from previous video in memory   to   NO previous. (more memory for me), but I can not move windows well.
I can really live without moving windows

Saludos

33
Applications / Re: ArcaOS 5.1 - First Impressions
« on: January 01, 2024, 07:27:56 pm »
Now do you use startup.cmd or the startup folder to start any programs ?
Yes, I'm attaching a photo of the startup.cmd
Quote
I would recommend for now to keep the virtualaddresslimit set to 2048 and not 3072.
I have to try it.
Quote
One other thing I noticed (which I can not explain) is this:
----- Contents of file: C:\var\log\xwptrap.log ---------------------------------
*** Excessive file size truncated. Showing the last 20000 bytes. ***
                               
    0065F940: 0065F624  PMMERGE  00:FFFFFFFF
         
       yes, you're right, I've never seen it             

 saludos

34
Applications / Re: ArcaOS 5.1 - First Impressions
« on: January 01, 2024, 05:15:38 pm »
On my case, on the Thinkpad T14s 1st Gen, when I got "hyperthreading ON", I started to get boot freezes with ArcaOS 5.1. Once I disabled it, I was able to get ArcaOS working. Do you see any difference when you turn it off? do you want to try for a few days and see if there is any difference?
I tested it for months, with arcaos508, and it’s the same, but slower. Until one day I realized a difference. With 4 processors could not open https://html5test.com and with 8 if it could.
saludos

35
Programming / Re: Qt6 Application Testing
« on: January 01, 2024, 02:11:35 pm »
I am having a fantastic experience with your QT6 632. in Arcaos 5.1, with the new XWP1-0-16, and the ACPID.CFG configuration
To watch videos on YouTube, I advise first to open dbcsmap.exe, you can minimize it, but leave it open. Before open Dooble.
Then you open the dooble, I use the 05-30-2023.
And important to open the YouTube windows in a new window, not in a Tab.
Saludos

36
Applications / Re: ArcaOS 5.1 - First Impressions
« on: January 01, 2024, 12:49:15 pm »
But please just do not try just as a short in the dark.  That is what you are doing.
Can you rewrite this line? I don,t undertand it.
Quote
I would strongly recommend not changing these settings...  Why I have not seen ANYBODY ever changing these settings.
Stability increases me and the system improves. Are you suggesting that I don't modify anything, and that 50% of the startups fail with a system crash?
Quote
Did you disable hyperthreading ? Can you upload a testlog generic ?
From what I have seen, some computers work better with hyperthreading ON, and others work better OFF. For me that is a myth.
What I have seen in some Bios, is that they have an option to select Legacy mode, or Modern hardware option.
In legacy mode, the dbexpert works perfect, but a lot of programs do not even open, Lucide...., in Modern hardware is more compatible with all programs, but the dbexpert sometimes closes unexpectedly.
I attach a generic testlog
Saludos

37
Applications / Re: ArcaOS 5.1 - First Impressions
« on: December 31, 2023, 04:09:15 pm »
I just installed arcaos5.1 from scratch, I was very disappointed, it was hanging without any other application open.
But I remembered that I had a copy of 508, and checking things I found this in :

C:\MPTN\ETC\acpid.cfg

and changing only these two values changed everything completely.
; IdleCount: Number of CheckIntervals needed to determine system idle, default=5
IdleCount = 0.3125

; CheckInterval: Delay time between checking cpu load and temperature (seconds), default=1
CheckInterval = 1.3125

If anyone wants to try it.

I am experimenting with other values, and with 0.3125 and 125 , I have 8 processors with less than 25% evenly distributed all, 6 taps open, a youtube video in the background, with Dooble 632. Interesting.
Sorry, modyfy 0.03125 and 125
Saludos

38
Utilities / Re: LinearMemoryMap.cmd => new version produces an error...why?
« on: December 23, 2023, 09:05:23 pm »
Hi Darirusz
Simply what I see, is that the CMD seeks in a series of roads, where people abitually install the Theseus. And on that path it is not.
If you edit the CMD, and you put these lines to work.
Code: [Select]
  if queryResult \== '' then leave
    exePath = 'G:\util\theseus\theseus4.exe'
    queryResult = stream(exePath, 'C', 'QUERY EXISTS')
Approximately line 154
What I don't know is like taking advantage of this tool.
saludos

39
Hardware / Re: Driver for network card X1PCIEXP1 or intel
« on: December 11, 2023, 01:28:56 pm »
Everything is perfect, I changed the hard drive, the E1000B network driver, and it is working.
Saludos

40
Hardware / Driver for network card X1PCIEXP1 or intel
« on: December 11, 2023, 12:32:58 pm »
Hello,
 I have bought a PC, HP, on the motherboard it mounts this network card:
------------------------------------------------
 Bus 0 (PCI Express), Device Number 25, Device Function 0
 Vendor 8086h Intel Corporation
 Device 153Ah Ethernet Connection I217-LM
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 8027103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : F7C00000h
 Address 1 is a Memory Address (0-4GiB) : F7C3D000h
 Address 2 is an I/O Port : F080h
 System IRQ 20, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   Unknown Capability (Code 13h)!!
----------------------------------------

I can't find a driver for it.
What card is compatible with any free pciexprex port in Arcaos 508?

Saludos


41
Programming / Re: Qt6 Application Testing
« on: December 03, 2023, 04:00:45 pm »
I wanted to call them attention, to try to activate in the BIOS, the Hyper Threading. In my case the https://html5test.com failed me, and since it works for me. With the QT6 632.
Saludos

42
Applications / Re: Registry editor
« on: July 15, 2023, 12:10:36 pm »
I have :
15/07/23 11:53      3.149.374      0 a--r  OS2.INI
15/07/23 11:53      1.145.424      0 a--r  OS2SYS.INI
No problems,  I edit with C:\SYS\APPS\FM2\FM2TOOLS\INI.EXE INI Viewer
I only have in desktop one folther and trash can, in all my os2 arcaos systems for many years:
Directory of C:\desktop

 8/07/23 15:37          <DIR>    817 a---  .
 8/07/23 15:37          <DIR> 18.990 a---  Escritorio
21/04/20 13:07          <DIR>    619 a---  Trash Can
saludos

43
Programming / Re: Qt6 Application Testing
« on: July 09, 2023, 04:16:13 pm »
It happens to me that with the CodePage 850, using the QT6-632, when I pulse and loose the ALT key, a while later pulse 'e', and jump to the edit of the dooble. It is as if the Alt key was pressed. That is not right.
Saludos

44
Programming / Re: Qt6 Application Testing
« on: June 03, 2023, 11:24:09 pm »
I'm glad you can use dooble, I'm already using 99% OK. Applying the QW13.bas patch. Now I will try to convert it, to be able to use it on another computer. Because here it seems that it doesn't work for anyone.
Saludos

45
Programming / Re: Qt6 Application Testing
« on: June 01, 2023, 04:10:53 pm »
Hello
Here you are the expert and I am a simple user, but I see that your mistakes are very similar and
that I have seen.
I have only seen a problematic doscall1, when you have seen more.
And the way to solve it has been executing it 3 times, to be able to mark as non -REM, all the lines.

My doscall1 as you see is another point of memory different from yours, so many cannot execute my
Patches
In my case I continue with some unexpected closures. And I see two paths to continue cleaning Libcn0.dll, or start trying with
 Libcx0.dll

I include the detail of my extracted pokes of the QW5.bas to qw7.bas in preparation.
Code: [Select]
...
REM QTWEBENGINEPROCESS.EXE      10000 / 3C0   20000 / 1C0    30000 / 100000

 POKE &H0001020D, 1
 POKE &H000102C7, 1
 POKE &H00010353, 1

REM 30000/100000
 POKE &H00032E55, 1
 POKE &H00032F65, 1
 POKE &H0003311A, 1
 POKE &H0003320A, 1
 POKE &H000332A5, 1

   rem

POKE &H00033705, 1
REM POKE &H0003370A, 1
rem POKE &H0003397D, 1
POKE &H00033C15, 1
POKE &H00033EA9, 1
POKE &H00033EE6, 1
POKE &H00033F1B, 1
POKE &H00034005, 1
POKE &H00034082, 1
POKE &H000342E0, 1
rem POKE &H00034329, 1
REM POKE &H00034357, 1
POKE &H0003442D, 1
POKE &H0003449C, 1

   ...
   REM DOSCALL1 00009DAB
REM ------------------
POKE &H0000A912, 1                 ******** 1 ******

rem error libcn0 000158FC
rem ---------------------
POKE &H00015A04, 1
rem POKE &H00015A20, 1
 POKE &H00015A3B, 1
rem POKE &H00015A40, 1
 POKE &H00015A43, 1
 POKE &H00015AE2, 1
 POKE &H00015BD0, 1
 POKE &H00015CC9, 1
 POKE &H00015D7C, 1

rem POKE &H00015E90, 1
rem POKE &H00015EF1, 1
rem POKE &H00015F19, 1
 POKE &H00015F79, 1
rem POKE &H00015FA8, 1
 POKE &H000160A4, 1
 POKE &H00016121, 1
rem POKE &H00016548, 1
rem POKE &H00016790, 1
....
rem tras aprox. 1 hora video me manda error al doscall1 00009dab ??raro sigsev
rem Trap  ->  1FFC9DAB   DOSCALL1  0002:00009DAB  between DOS32R3EXCEPTIONDISPATCHER + 93 and _xcptR3ExceptionDispatcher - E1

rem doscall1.dll 00009dab el mismo de antes ***repetido ****
POKE &H0000A912, 1                 ******** 2 ******

 POKE &H0003397D, 1
    POKE &H00033C15, 1
    POKE &H00033EA9, 1
    POKE &H00033EE6, 1
    POKE &H00033F1B, 1
    POKE &H00034005, 1
REM    POKE &H00034082, 1
REM   POKE &H000342E0, 1
POKE &H00034329, 1

 POKE &H00034357, 1

...
rem tras aprox. 1 hora video me manda error al doscall1 00009dab ??raro sigsev
rem Trap  ->  1FFC9DAB   DOSCALL1  0002:00009DAB  between DOS32R3EXCEPTIONDISPATCHER + 93 and _xcptR3ExceptionDispatcher - E1

rem doscall1.dll 00009dab el mismo de antes ***repetido ****
POKE &H0000A912, 1                 ******** 3 ******

 POKE &H0003397D, 1
    POKE &H00033C15, 1
    POKE &H00033EA9, 1
    POKE &H00033EE6, 1
    POKE &H00033F1B, 1
    POKE &H00034005, 1
      POKE &H00034082, 1
      POKE &H000342E0, 1
POKE &H00034329, 1

 POKE &H00034357, 1


saludos

Pages: 1 2 [3] 4 5 ... 55