Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - roberto

Pages: [1] 2 3 4
1
Networking / Connection to your own http cloud with ArcaMapper
« on: January 07, 2024, 05:42:28 pm »
I wanted to make an http connection, but I get this error 58. Photo attached.
Should I open a tickect, or am I doing something wrong?
I think it's weird those slashes in front of the http, but...
With arcaos5.1
Saludos

2
Setup & Installation / Code page 850 in arcaos51 and in Arcaos508 change?
« on: January 03, 2024, 06:23:30 pm »
I have a question, I get some pages of different codes in Arcaos51, to the ones given to me by Arcaos508.
Have they changed? Or it's some glitch in my system.
Saludos

3
Hardware / Driver for network card X1PCIEXP1 or intel
« on: December 11, 2023, 12:32:58 pm »
Hello,
 I have bought a PC, HP, on the motherboard it mounts this network card:
------------------------------------------------
 Bus 0 (PCI Express), Device Number 25, Device Function 0
 Vendor 8086h Intel Corporation
 Device 153Ah Ethernet Connection I217-LM
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 04h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 8027103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : F7C00000h
 Address 1 is a Memory Address (0-4GiB) : F7C3D000h
 Address 2 is an I/O Port : F080h
 System IRQ 20, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   Unknown Capability (Code 13h)!!
----------------------------------------

I can't find a driver for it.
What card is compatible with any free pciexprex port in Arcaos 508?

Saludos


4
Applications / Do you have any update of Thunderbird?
« on: May 24, 2023, 09:47:44 am »
Ultimately it happens to us that we cannot send emails with Thunderbird to Gmail accounts. Is there any solution for this?
With Dooble you can access Gmail and send but it is not what I am looking for.
Saludos

5
Setup & Installation / Virtual memory, a curious phenomenon
« on: January 03, 2023, 10:32:49 am »
There is a strange result in virtual memory, depending on where the Swapper position is defined in the config.
In my case if I have the config.sys:
SWAPPATH=C:\OS2\SYSTEM 0 4096
after start the system:
[C:\]mem /v

Total physical memory:      3 895 MB
Accessible to system:       2 999 MB
Additional (PAE) memory:      896 MB

Resident memory:              129 MB
Available virtual memory:     514 MB   <------

Available process memory:
  Private low memory:         373 MB
  Private high memory:      2 240 MB
  Shared low memory:          310 MB
  Shared high memory:       2 211 MB

 But if I create a new unit in 512MB memory,with Ramdisk, unit L: \, HPFS type, and define in the config.sys as:
 SWAPPATH=L:\ 0 4096
 [C:\]mem /v

Total physical memory:      3 895 MB
Accessible to system:       2 999 MB
Additional (PAE) memory:      896 MB

Resident memory:              129 MB
Available virtual memory:   3 321 MB  <------

Available process memory:
  Private low memory:         373 MB
  Private high memory:      2 240 MB
  Shared low memory:          310 MB
  Shared high memory:       2 211 MB

It seems that the 512MB is more important, than anything else, so that it occurs, that change.
On the other hand I do not see any change in the rest of the operation of the system, but it took a short time of evidence.

Saludos

6
Storage / USB3.0 copy speed
« on: October 28, 2022, 07:43:39 pm »
I usually make very few copies to USB, but yesterday I made a copy to USB 3.0 with FC 240, 2.9GB in approximately 14 minutes at a speed of 3,407k. With 3521k tips, I took a photo because I was a little surprised. But when going to restore it, copying it to another computer was exaggeratedly slow.
I have intended to replicate it on the origin computer and I can't.
You can tell me if that speed is normal or abnormal.

Saludos

7
Applications / Dbexpert and lotusw4 I can't install them in arca507
« on: October 25, 2022, 12:36:39 pm »
After reinstalling a new system completely, it does not let me install either of these two applications.
 It seems that it fails to unpack the files.

In the case of the Dbexpert, who had it previously installed, modifying the config.Sys, lets me open the application,
 and it works, but it does not let me open the ODBC DRIVERS.So I have no access to the tables.

Any suggestion?

It is the first time this happens to me.

Normally I install the Dbexpert at the beginning before updating everything, but on this occasion I did it to the setback.

Saludos

8
Setup & Installation / I think I've found the magic number
« on: October 22, 2022, 09:44:17 pm »
The edm2 web site :
#define ORD_DOS32PERFSYSCALL            976

This number is 31.25 pwr 2 = 976.5625 (I do not know, but maybe in an era with two processors, it could be valid, But they did not include the decimal part.)
I have tried many numbers and there is one that is especially good.

         31.25 pwr 6 = 931322574.615478067200

If defined in the config.sys (only one line)
SET ORD_DOS32PERFSYSCALL=931322574.615478067200
SET ORD_DOS32PERFSYSCALL=931322.574615478067200
SET ORD_DOS32PERFSYSCALL=931.322574615478067200
SET ORD_DOS32PERFSYSCALL=0.93132257461547806720

The position in the config.sys will be after the line:
SET IPF_KEYS=SBCS

I understand that they all work, but in some computers will work better one number or another.
Maybe it that the number that shows more available memory after booting is the best option for that computer,
 but this I have little tested

I have been able to be with the Dooble, playing a music video for more than an hour, without it closing.
Without touching it, when I touch it first cease the image and then the sound ceases.
But it didn't shut down. I can change the flap, but not on operational.
The dbexpert also works better.

Saludos

9
Applications / Seamonkey 2.42.2 SRE Mem Patch
« on: January 01, 2022, 03:54:03 pm »
I have been trying that SeaMonkey did not close me. Always with Standard Memory.

And I started patching the memory.
Each time works better.

I have already generated above 3000 poke lines, which if there would not be a pattern I understand
It would be impossible to work.

What I think it happens is that the exceptq program shows me some error points that
They are found in 5B, and the only thing I do is change the 5B for 1, A6 or 238

What I believe is that the system when it is located with a value 5b is slowing down so much that it fails.
But when changing it for another value like 1 the fastest I think, but not the best.
The A6 when they are errors that may appear on the screen. The AD value will also be valid.
And 238 when errors affect sound.


The Open Journal ver101 program, works OK, showing the text of the months. This program helped me find the values A6, AD, as valid.
 The EPM has been very helpful.
 Sometimes everything worsen, but when it continued improved.

I hope it serves them.
I attached the patch, smm20.zip. Happy and prosperous 22
Saludos

10
Applications / Librecad and other ports
« on: November 09, 2021, 10:01:24 pm »
Thank you very much for carrying this application, I find it very comfortable not to have to start WIN to be able to use a CAD program in OS/2.
I just have a question, because you do not put the icon if you have it in the folders.
The other program that I wanted to test is the OpenJournal, but it does not let me open it. I do not see any error file.

Saludos

11
Programming / QBASIC POKE IN REXX is possible?
« on: November 05, 2021, 08:22:23 pm »
I wanted to know if there is an instruction similar to QBASIC Poke in Rexx

POKE &H00006281, 238 in rexx =   ...

Saludos

12
Applications / pk-s10.bas
« on: October 13, 2021, 05:16:37 pm »
This application serves to improve the sound when new windows are opened in the browser. The improvement is approximately 90%, there is still little NOISE, very little, especially when running cmd s in the background.
It also means that by having a lot of memory consumed and closing applications, it does not increase memory consumption and they close quickly.
I hope it helps you.
I like this more now:
swappath = c: \ 0 2048
The first value always zero, the second 4096 is fine too.

Lines 9 to 69 are for sound enhancement
Lines 78 and 79 free memory when closing programs, they do not consume more memory.

Code: [Select]
CLS
DATA long a
PRINT "ejecutando pk-S00..."
REM swap 2048 2048
FOR a = 1 TO 100000
REM no quitar la linea print o se generara el error wifi on off
 PRINT a

REM SONIDO EN MOUSE *MOU* EE   EN WPSTKMOU
POKE &HFBA90753, 238
POKE &HFBA90786, 238
 POKE &HFBA90A75, 238

 REM AMOU0034 EE
POKE &HFBA86A2F, 238
POKE &HFBA86D5A, 238

REM AMOUSE EE
POKE &HFBA83F0B, 238
POKE &HFBA842EA, 238
POKE &HFBA84377, 238
POKE &HFBA84410, 238
POKE &HFBA844C0, 238
POKE &HFBA8486E, 238

REM NBAUDIO EE
POKE &HFB939167, 238
POKE &HFB939225, 238

REM AMOUHOOK EE
POKE &HFB9385B5, 238
POKE &HFB9387A3, 238

REM AMOUDLL EE
POKE &HFB93222E, 238
POKE &HFB9324C1, 238
POKE &HFB93250F, 238
POKE &HFB932662, 238

REM MOUCALLS EE
POKE &HFB917F49, 238

REM VMOUSE EE
POKE &HFB85D422, 238

REM XWPMOUSE EE  NADA

REM AUDIO *AU* EE
REM AUDIOIF  NADA
rem AUDIOSH NADA

REM AUDIOMCD EE NADA
REM USBAUDIO.SYS   = UNIAUD16.SYS
POKE &HFB836E0C, 238
POKE &HFB836E12, 238
POKE &HFB836E18, 238
POKE &HFB836E24, 238
POKE &HFB836E1A, 238
POKE &HFB836E2A, 238
POKE &HFB836E30, 238
POKE &HFB836E48, 238
POKE &HFB836E4E, 238
POKE &HFB836E54, 238
POKE &HFB836E6A, 238
POKE &HFB836E60, 238
POKE &HFB836E66, 238
POKE &HFB836E6C, 238

rem POKE &HFB83743E, 238   hang

REM UNIAUD16.SYS DIFERENTES A USBAUDIO
REM POKE &HFB836E0C, 238
POKE &HFB36E1E, 238
POKE &HFB36E5A, 238
POKE &HFB3743E, 238

REM PMSHELL
POKE &H1F9806B9, 238
POKE &H1F980D79, 238
REM POKE &H1F98102A, 238



NEXT a
END


Saludos

13
Setup & Installation / A question of fonts
« on: June 13, 2021, 08:53:11 pm »
1- if I select the font MARKSYM it does not show me anything, I came to think that I had damaged inis, but I installed a new system and it did not show anything either. It's correct like this?

2 - how can I install a ttf font. I have tried drag and drop and it tells me that it is installed. But I'm not sure if I got it right. In the name it gives me the character of the Greek letter pi.
13/06/21 16:23         62.628    355 a---  MarketSans-SemiBold-WebS.ttf
This is the font that I downloaded from the internet, and what I understand is not for os2 or is it?

saludos

14
Applications / Copy and paste fails me in QT5.13.1 games
« on: May 29, 2021, 11:16:54 pm »
I was testing new games Gotte and Cutemaze, they both work very well.
But when trying to make a copy paste with the help menu, the copy paste fails me.
Saludos

15
Applications / theseus 4.001 trap in usbmon
« on: May 23, 2021, 09:06:37 am »
The Theseus program, when I click twice on the USBMON it generates a TRAP.
If someone is not produced any TRAP, let them tell me and I will tell them what I want.

I leave you this patch, it runs in a DOS session, starting it with Qbasic, at the beginning of the system boot.
 It's not finished, it's experimental, but it seems to work. In some computers it produces an overflow error and it is not possible to execute it.
The name for the file is pk-r05.bas
Code: [Select]
CLS
DATA long a
PRINT "ejecutando pk-r00..."
REM swap 2048 2048
FOR a = 1 TO 100000
REM no quitar la linea print o se generara el error wifi on off
 PRINT a
REM  POKE &HFFEBCBDD, 0
REM  POKE &HFFEBCBDD, 0


REM overflow POKE &HFFEBC821, 160
POKE &HFFEBC974, 53
POKE &HFFEBCA6D, 53
POKE &HFFEBCFB9, 53
POKE &HFFEBD594, 53
POKE &HFFEBD6E0, 53
POKE &HFFEBD6F4, 53
   POKE &HFFEBDD3C, 53
   POKE &HFFEC4C2C, 53

 REM MMHELP
 POKE &HFBB1A323, 20
REM A4A4 ARREGLA BARRA NEGRA EN TRUE SPECTRA
 POKE &HFBB1A4A4, 20
 POKE &HFBB1A639, 20
 POKE &HFBB1A6E2, 20

 POKE &HFBB1A7F7, 20
 POKE &HFBB1B887, 20
 POKE &HFBB1F7E5, 20
 POKE &HFBB218B0, 20

 REM ASWITCH
 POKE &H11898, 20
 POKE &H118F2, 20
 POKE &H11951, 20

REM FREEMEMR
POKE &H1F321B66, 20
POKE &H1F321C24, 20
POKE &H1F321C51, 20
POKE &H1F321DA8, 20
POKE &H1F321E9C, 20
POKE &H1F321EC0, 20
REM POKE &H1F321F31, 20
POKE &H1F321FC9, 20
POKE &H1F322090, 20
POKE &H1F32245A, 20
POKE &H1F3224EF, 20
POKE &H1F3225A3, 20
POKE &H1F3225AB, 20
POKE &H1F3226A7, 20
POKE &H1F322766, 20
POKE &H1F322904, 20
POKE &H1F322A24, 20
POKE &H1F322AAC, 20
POKE &H1F322B60, 20
POKE &H1F322B82, 20
POKE &H1F322BDE, 20
POKE &H1F322CC0, 20
POKE &H1F322DBE, 20
POKE &H1F322DE9, 20
POKE &H1F322DFC, 20
POKE &H1F322E0D, 20
POKE &H1F322E41, 20
POKE &H1F322E7A, 20
POKE &H1F322EAD, 20
POKE &H1F322ECC, 20
POKE &H1F322EE9, 20
POKE &H1F322F5B, 20
POKE &H1F322FC3, 20
POKE &H1F32303F, 20
POKE &H1F3230B4, 20
POKE &H1F323108, 20
POKE &H1F323173, 20
POKE &H1F3231C8, 20
POKE &H1F3231D9, 20
POKE &H1F323253, 20
POKE &H1F323261, 20
POKE &H1F3232E5, 20
POKE &H1F323449, 20
POKE &H1F3234B6, 20

REM GRE2VMAN PMSHELL
POKE &H1F371B66, 160
POKE &H1F371C24, 160
POKE &H1F371C51, 160
POKE &H1F371E9C, 160
POKE &H1F371EC0, 160
POKE &H1F371F31, 160
POKE &H1F372090, 160
REM POKE &H1F37245A, 160
REM POKE &H1F3724EF, 160
REM POKE &H1F3725A3, 160
REM POKE &H1F3725AB, 160

REM PNCLOCK PMSHELL
POKE &HFE3B7F04, 160

REM VDM PMSHELL
POKE &HFE3B626A, 160
POKE &HFE3B63B0, 160

REM CAD-POP PMSHELL
POKE &HFE3BC26C, 160

rem xwpdaemon pmshell
poke &HFE3B726A, 160

REM NDCTL PMSHELL
POKE &HFE3B9465, 160

rem harderr pmshell
rem POKE &HFE3B5B09, 160
rem POKE &HFE3B626A, 160


REM ERRORS CRASH
POKE &H1E101AE6, 211
REM 1AE1 1AEC EXPERIMENTALLLL  UN SIGNO 2D -
POKE &H1CB41AEC, 211
POKE &H1CB41C82, 211
POKE &H1682DA77, 211
POKE &H1E101AE6, 211

REM IMPORTANTES MEMORIA AGOTADA
poke &H1CB41AE1, 160
POKE &H1CCA1AE1, 160

rem errores de los trp
POKE &H001AF5F3, 20
POKE &H001AD083, 20
POKE &H001AB173, 20

REM POKE &H0013C4DF, 20
rem POKE &H0013C4FF, 20 falla con las descargas se cierra
rem POKE &H0013C5E4, 20 ciclo infinito no mejora



    REM midi 92b8
    REM POKE &HB96792B8, 211
   REM mouse 51b8
   REM POKE &HFCC051B8, 211

REM   POKE &HFFEC8082, 160
REM   POKE &HFFEC830F, 160
REM   POKE &HFFEC8333, 160
REM   POKE &HFFEC843D, 160
REM    POKE &HFFEC8464, 160
REM   POKE &HFFEC84BA, 160
REM   POKE &HFFEC8532, 160
REM   POKE &HFFEC8543, 160
REM   POKE &HFFEC86C2, 160
REM   POKE &HFFEC876B, 160
REM   POKE &HFFEC877C, 160
REM   POKE &HFFEC884B, 160
REM   POKE &HFFEC886E, 160
REM   POKE &HFFEC88CA, 160
REM   POKE &HFFEC8AD6, 160
REM   POKE &HFFEC8C8A, 160
REM   POKE &HFFEC8C90, 160
REM   POKE &HFFEC8F1E, 160
REM   POKE &HFFEC8F73, 160
REM   POKE &HFFEC8FA3, 160
REM   POKE &HFFEC8FEB, 160
REM   POKE &HFFEC9092, 160
REM   POKE &HFFEC90F0, 160
REM   POKE &HFFEC91CF, 160
REM   POKE &HFFEC9242, 160
REM   POKE &HFFEC92A0, 160
REM   POKE &HFFEC92EC, 160
REM   POKE &HFFEC9450, 160
REM   POKE &HFFEC9562, 160
REM   POKE &HFFEC958E, 160



NEXT a
END





Pages: [1] 2 3 4