Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: [1] 2 3 ... 45
1
Programming / Re: Qt6
« on: November 13, 2022, 03:09:08 pm »
Hello Paul,
I attach a file. Try to execute it in a QBASIC session when starting the system, and you leave it in execution in the background, with QBASIC, in a Window DOSsession. Then you run everything you want.
This is a shot in the air.
 But why not try?.
What is based on error that you show us.
Saludos

2
Storage / Re: USB3.0 copy speed
« on: October 29, 2022, 02:52:29 pm »
If I can repeat it, it is simple:
DISKCACHE=4096000,LW
But I can only do it from the computer to memory, but from memory to the computer it is very very slow.
That possible values should modify in order to read the memory at the same speed. I should not work at the same speed in both senses.
Saludos

3
Storage / Re: USB3.0 copy speed
« on: October 29, 2022, 12:22:53 am »
I did try your parameters, and things really slowed down.
I see the same, slowed, now.
Quote
Quote
"Swappath = C: \ 0 4096"

Why would you use a minimum size of zero bytes? That is surely going to cause problems if swap ever fills up. How much real memory do you have? If it is more than 2 GB, swap will probably never be used anyway.
I like how good it goes.

Quote
Quote
What interests me most is your opinion of whether it is a good performance or not, by your experience.

Since I don't use FC, ...
Thanks
Quote
Quote
Chkdsk /F, but does nothing.

What do you mean by "nothing"? Is it hung? Is it telling you that nothing is wrong?
You send the instruction and wait and wait ... and restart.

Quote
Quote
The only thing that caught my attention, was the Glocal (country palette) en-US, showed me when I made the flap with a strange source, similar to the photo that commands you, but in the flaps, not in the text like this photo.

I don't understand what you are trying to say. If you use a different language, and code page, to read it, than was used to write it, almost anything can happen.
I only use a language, it is es_ES_EURO, but sometimes, I put en_US, for test with the dbexpert. This is not the case. I only e used es_ES_EURO. But I have other possible languages for test.
What I mean is that, when the superior flaps that say; Time, Date, Monetary .... They were with the font of the photo. Helv 12 ??

saludos



4
Storage / Re: USB3.0 copy speed
« on: October 28, 2022, 11:45:03 pm »
Is formated as Fat32.
I put it again in W10, I said it repair it and this operation in Arcaos is ok.
saludos

5
Storage / Re: USB3.0 copy speed
« on: October 28, 2022, 10:48:08 pm »
This is a Micro SD Ultra, 32GB Sandisk. Formatted with DFSEE long ago. The origin is a SSD hard drive, with JFS. All very normal.
IFS=C:\OS2\JFS.IFS /LW:64,256,8 /AUTOCHECK:*
"Swappath = C: \ 0 4096"
What interests me most is your opinion of whether it is a good performance or not, by your experience.
I continue without being able to repeat it, so much that I have spoiled the targeta and tells me the OS2 that Chkdsk /F, but does nothing. I put it in W10, and recognized it to the first, and opened my files. In the same laptoop.

The only thing that caught my attention, was the Glocal (country palette) en-US, showed me when I made the flap with a strange source, similar to the photo that commands you, but in the flaps, not in the text like this photo.

Saludos

6
Storage / USB3.0 copy speed
« on: October 28, 2022, 07:43:39 pm »
I usually make very few copies to USB, but yesterday I made a copy to USB 3.0 with FC 240, 2.9GB in approximately 14 minutes at a speed of 3,407k. With 3521k tips, I took a photo because I was a little surprised. But when going to restore it, copying it to another computer was exaggeratedly slow.
I have intended to replicate it on the origin computer and I can't.
You can tell me if that speed is normal or abnormal.

Saludos

7
Applications / Re: Dbexpert and lotusw4 I can't install them in arca507
« on: October 26, 2022, 10:49:00 am »
Thank you, it has been very simple, delete the previous and everything perfect installation. We all have a bad day.
Saludos

8
Applications / Re: Dbexpert and lotusw4 I can't install them in arca507
« on: October 25, 2022, 02:41:13 pm »
The Dbexpert, who was the one who was in a hurry is resolved. Changing the installation unit, for another one. It seems some type of software protection. The Lotus will look at him more calmly.
saludos

9
Applications / Dbexpert and lotusw4 I can't install them in arca507
« on: October 25, 2022, 12:36:39 pm »
After reinstalling a new system completely, it does not let me install either of these two applications.
 It seems that it fails to unpack the files.

In the case of the Dbexpert, who had it previously installed, modifying the config.Sys, lets me open the application,
 and it works, but it does not let me open the ODBC DRIVERS.So I have no access to the tables.

Any suggestion?

It is the first time this happens to me.

Normally I install the Dbexpert at the beginning before updating everything, but on this occasion I did it to the setback.

Saludos

10
Setup & Installation / Re: I think I've found the magic number
« on: October 23, 2022, 05:38:00 pm »
Roderick
 I attach a file mj.zip, which contains a program in basic, the lines from 1783 to 1786, make that when the Dooble program is closed, it does not stay open. It also works with the simple browser.
What I do not tell you is if you need the previous lines, that is, from 15 to 1782, but I think I remember that adding those lines was when the problem of the Dooble was solved by closing
I use this program to be able to use the Seamonkey as similar as possible to the Dooble.
Remember to start it at the beginning of the session.
This is done playing mahjongg, every time I got an error, I opened the theseus, and selected the memsh, from the dll that I thought could fail and already this.

Saludos

11
Setup & Installation / Re: I think I've found the magic number
« on: October 23, 2022, 03:59:37 pm »
Roderick
Many of your questions, I don't have an explanation for it either. I only base myself on what works for me.
If someone else is served better, if I get confused it is desired and ready.
I often ask myself questions like
what would happen if I did...?
Since I don't program I don't try to do what I don't know.
Anyway I try to apply my common sense reasoning as much as possible.

I have long read in the book: Insideos2, isos2.txt in section 16.3 Timer Services , you can see 31.25 millisecons
What I didn't know was how I could apply it.
But as always Looking for one thing, I find another.
What I can tell you is that I have tried all the powers from 1 until the numbers stop being integers, maybe it is because 6 and a multiplier of 32, but this I do not know. It is the one that works best.

Saludos

12
Setup & Installation / Re: I think I've found the magic number
« on: October 23, 2022, 03:28:19 pm »
A DLL contains functions that are available for use by other programs. These functions may be referenced by their name or by their "ordinal number", which must be an integer. What "#define ORD_DOS32PERFSYSCALL            976" does, is making clear that the ordinal number for the function DOS32PERFSYSCALL is 976.

Fractions cannot be used as an ordinal number for a function. If you would look inside a DLL for function number 931.322574615478067200 , you will not find it. You may find function number 931 or 932, but not 931.322574615478067200.

But aren't they different variables?
ORD_DOS32PERFSYSCALL <> DOS32PERFSYSCALL
saludos

13
Setup & Installation / I think I've found the magic number
« on: October 22, 2022, 09:44:17 pm »
The edm2 web site :
#define ORD_DOS32PERFSYSCALL            976

This number is 31.25 pwr 2 = 976.5625 (I do not know, but maybe in an era with two processors, it could be valid, But they did not include the decimal part.)
I have tried many numbers and there is one that is especially good.

         31.25 pwr 6 = 931322574.615478067200

If defined in the config.sys (only one line)
SET ORD_DOS32PERFSYSCALL=931322574.615478067200
SET ORD_DOS32PERFSYSCALL=931322.574615478067200
SET ORD_DOS32PERFSYSCALL=931.322574615478067200
SET ORD_DOS32PERFSYSCALL=0.93132257461547806720

The position in the config.sys will be after the line:
SET IPF_KEYS=SBCS

I understand that they all work, but in some computers will work better one number or another.
Maybe it that the number that shows more available memory after booting is the best option for that computer,
 but this I have little tested

I have been able to be with the Dooble, playing a music video for more than an hour, without it closing.
Without touching it, when I touch it first cease the image and then the sound ceases.
But it didn't shut down. I can change the flap, but not on operational.
The dbexpert also works better.

Saludos

14
Applications / Re: Test build of dooble with qt5
« on: October 17, 2022, 07:23:48 pm »
Paul-
This version works very similar to the previous ones. For me the main problem is that the browser does not last 1 hour, if I am with a background music video. I am using the last UNIAAUD32 6.0 version.
Martin -
The other day I got chance with Dooble and with SimpleBrowser a score of 522, with both open at the same time.
Simple Browser:
http://html5test.com/s/1740f15ddc218da2.html
Dooble:
http://html5test.com/s/7626f85ddc2890d2.html
Today with the last version of Paul, I also got out of a test with 522, but it is not easy to repeat it.
http://html5test.com/s/a8ffd95dff5eac73.html
os4user-
The link https://www.speedtest.net/ work ok too.
But the first time I execute it with the last version of Paul, I close the browser with many open windows. Then with few windows it worked well.

Saludos


15
Applications / Re: printing from Lotus SmartSuite WordPro
« on: October 10, 2022, 09:36:56 pm »
Check the spooler program, enable disable enable and the redirection is ok?
saludos

Pages: [1] 2 3 ... 45