Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 ... 43 44 [45] 46 47 ... 54
661
Article Discussions / Re: Writing bug reports
« on: July 14, 2016, 08:57:45 am »
I have a problem with the klondike program and mahjongg . The problem is that some days I play with them without problems , and other days both programs are blocked , stopping both the team forcing me to restart .
I have not opened any mistake, because do not know how I can get more information about this error.
I have not found any file.log
And neither wanted to open a bug with nothing of problem info.
Can someone tell me how to get more information from the error issue.

Saludos ,Thanks

662
Yesterday the user finish the pc ok, without any problems.
Here was the problem in the user, he told me to turn it off properly, but the reality is that the user turn it off while doing the backup , with average copy made . As I understand it may be normal what happened. I am restoring the drive d: and I left the drive e: for further tests . With the Pete sugestions. Thanks Pete.
Saludos

663
Hello
I use this thread because i think that is similar problem.
Aproximately 15 days ago, over a pc with ecs2.0, I format and install ecs22b2. Yesterday the user finish the pc ok, without any problems.
Today in the start show this photo with the error:

The pc have one disk sata, and c: d: e: volums, c: start ok is the boot. But d: and e: are in error.


Saludos

664
Applications / Re: PDF Printer
« on: June 22, 2016, 10:22:47 am »
Hello Martin,
You can test this, I found in os2-esp yahoo groups spain:
https://es.groups.yahoo.com/neo/groups/os2-esp/conversations/messages/12027
translate:
> For those cases where the pmpdf not want to convert files to PDF,
> Well when we get a code 1- mistake, or when there fails but does not generate
> Pdf file . You can do the following to generate it :
>
> * * After having tried to generate the pdf , we can search file
> C: \ var \ temp \ pmpdf.ps (create a shadow of this file on the desktop
> Comfort)
> Creeps with the mouse on the PDF writer printer already !!! .

saludos

665
Networking / Re: Cannot start peer services
« on: June 05, 2016, 10:18:28 am »
Hi Andreas

Quote

That shows how it's wrong configured. TCPBEUI cannot have a logical adapter number of 0. Change the number in MPTS to 1 or another unused number and it will run.

This can be right if you are running Samba Server

Quote
It works fine with TCPBEUI logical adapter number of 0 here on several systems so the above is not the answer.

Yes, work fine, with 0

The better solution for this problem START REQUESTER, that I found is restore from a backup from other system that is running well. Change if is necesary the net adapters, etc.... and ready.

saludos


666
Networking / Re: Cannot start peer services
« on: June 03, 2016, 09:14:51 am »

That's the bit before the error.... looks perfectly normal. TCP/IP works OK.

PROTOCOL.INI  looks normal.... I guess it must be something in IBMLAN.INI causing the problem - unless it's a resource issue....
I see this error yesterday in me old Asus laptoop Z83C. I can not start the requester.
I install from the CD, the ecs22b2 + all the updates , after run Dfsee for repartition all the disk, and run minilvm for install a bmr , and after that install airboot. I can not install airboot without install the ibm bmr. Although not use the bmr.
ERROR in start requester.
Reinstall again, ERROR in requester???? The first time I see this error.
Reinstall again, but FORMAT WITH ERROR CHECK SLOW, without the updates all is ok. I only have to install the updates, but I think that the solution is in format.
Saludos

667
Applications / Re: Firefox 38.8.0 for OS/2 Beta 7
« on: June 01, 2016, 07:49:18 pm »
In ecs22b2 only the first start show this message:
Flash Plugin!
NSPR4.DLL not found....
The second start is all ok.

This can be me error, because it is possible that would be another open application.
Is running very well !! Thanks

Saludos

668
Applications / Re: Firefox 38.8.0 for OS/2 Beta 7
« on: May 30, 2016, 11:01:12 am »
In ecs22b2 only the first start show this message:
Flash Plugin!
NSPR4.DLL not found....
The second start is all ok.

In ecs2.0, in all cases show that message error. Only if copy the unixroot\usr\lib\nspr4.dll to firefox folder solve the problem.

Saludos

669
Setup & Installation / Re: OS/2 is unable to operate your hard disk
« on: May 23, 2016, 02:39:28 pm »

OS/2 in unable to operate your hard disk.
What could be causing the error? And how can I debug the problem?
Your ace transferred the system, after copy?
Run C:\OS2\INSTALL\BOOTDISK\SYSINSTX.COM X:
Saludos

670
Networking / Re: RTL8169 Problems
« on: May 18, 2016, 06:41:36 pm »
I once read you can not have two adapters running the same net.
yes, when you have a wifi and a ethernet adapter, you have two adapters in same net.
Quote
Not sure if this is correct. But thinking about it I do not know how the stack should route packets in such case. Same packet out on both interfaces?
yes, i guess.

Quote
And do you connect both interfaces at the same time to the same switch?
no, only one

saludos

 

671
Networking / Re: RTL8169 Problems
« on: May 18, 2016, 04:34:19 pm »
Problem solved.
In the tcpip I changed the lan0 to ip 192.168.1.12 and lan1 ip 192.168.1.10 and restart.

Perhaps it was a conflict of ips ?
But I find it strange that the ping fail , and the net view does not fail.

Saludos

672
Networking / RTL8169 Problems
« on: May 18, 2016, 01:06:07 pm »
Hello
I 've finally decided to install a server with more updates ecs22b2
The new PC has a Blast Broadcom network - Nextreme BCM5764M PCIe Gigabit Ethernet , which I did not find drivers.
I install a old 3com 3c900 that is runing ok, in lan0, ip 192.168.1.10, but slow. (this is now running)
Buy another TP-Link model no TG-3269 that is a realtek RTL8169 (give me problems), is in lan1, with ip 192.168.1.12
This rtl8169 have a mini cd with drivers for compiler.

The problem is:
In a command com, show this:
Code: [Select]
[C:\]ping 192.168.1.12
PING 192.168.1.12: 56 data bytes
64 bytes from 192.168.1.12: icmp_seq=0. time=0. ms
64 bytes from 192.168.1.12: icmp_seq=1. time=0. ms
64 bytes from 192.168.1.12: icmp_seq=2. time=0. ms

----192.168.1.12 PING Statistics----
3 packets transmitted, 3 packets received, 0% packet loss
round-trip (ms)  min/avg/max = 0/0/0

[C:\]ping 192.168.1.1
PING 192.168.1.1: 56 data bytes

----192.168.1.1 PING Statistics----
8 packets transmitted, 0 packets received, 100% packet loss

[C:\]net view
Server Name            Remark
─────────────────────────────────────────────────────────────────
\\LACIE-CLOUDBOX       LACIE-CLOUDBOX
\\MYBOOKLIVE           MY BOOK LIVE NETWORK STORAGE
The command completed successfully.

[C:\]

The lantran.log show this:
Code: [Select]
IBM OS/2 LANMSGDD [05/21/04] 6.00 is loaded and operational.
IBM OS/2 TCPBEUI 6.00.0
TCPBEUI: Using a 32-bit data segment.
Installing NETWKSTA.200 Version 6.0. IBM LAN Redirector ( May 25, 2005)

IBM OS/2 NETBIOS 4.0
Adapter 0 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
Adapter 1 has 123 NCBs, 96 sessions, and 6 names available to NETBIOS applications.
NETBIOS 4.0 is loaded and operational.
R8169 NDIS device driver @#Arca Noae LLC:1.0.2#@##1## 3 Sep 2015 15:26:18      DAZAR1    ::::2::SVN48@@Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 20
R8169 Hardware detected: RTL8169sb/8110sb.
IBM LANVDD is loaded and operational.
IBM OS/2 LAN Netbind
TCPBEUI: Logical adapter 0 is bound to TCP/IP interface lan0.
TCPBEUI: Logical adapter 1 is bound to TCP/IP interface lan1.



The testlog.cmd give me this: extract no full file!
Code: [Select]
----- Output of: bldlevel C:\ibmcom\macs\R8169.os2 -----------------------------
Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Arca Noae LLC:1.0.2#@##1## 3 Sep 2015 15:26:18      DAZAR1    ::::2::SVN48@@Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 2014 Arca Noae LLC
Vendor:          Arca Noae LLC
Revision:        1.00.2
Date/Time:       3 Sep 2015 15:26:18   
Build Machine:   DAZAR1   
FixPak Version:  SVN48
File Version:    1.0.2
Description:     Realtek 8169/1Gb PCIe MAC Driver Copyright (c) 2014 Arca Noae LLC
----- Output of: type R8169$ ---------------------------------------------------
The device does not recognize the command.
----- Contents of file: C:\ibmcom\lantran.log ----------------------------------

The net view is ok, but the ping fail.
Any help or sugestion?

Saludos

673
Setup & Installation / Re: Problems with JFS
« on: May 12, 2016, 07:19:41 pm »
You can do another test, and force a checkdisk turning off the computer(after install jfs 06),unplugging. and see if the system is able to repair the error during startup. This is similar to run this in your config.sys
IFS=M:\OS2\JFS.IFS /LW:5,20,4 /AUTOCHECK:+*

saludos

674
Setup & Installation / Re: Problems with JFS
« on: May 12, 2016, 05:26:38 pm »

@roberto
Both laptops had recent "clean" installs to disks that had had all existing volumes deleted and volumes of different sizes to those deleted were created. After updating JFS the "lost" volume problem started.
Well, Why not erase all data volumes other than the boot? . And tests to boot. I understand that you do not have the x:\home\default\ folder on the boot . In this case I delete it too.
Then you can restore it.
This is to rule that the data is not the problem.

Saludos

675
Setup & Installation / Re: Backslash changes to long dash
« on: May 11, 2016, 01:56:09 pm »
You can change your keyboard in a command com
keyb SP               for spanish
keyb UK               US               etc.. see the help for locate your country keyboard.

Saludos

Pages: 1 ... 43 44 [45] 46 47 ... 54