Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Remy

Pages: [1] 2 3 ... 59
1
Programming / Re: GCC - updates
« on: April 30, 2025, 01:01:30 pm »
It's a fairly small computer, https://www.os2world.com/wiki/index.php?title=Lenovo_ThinkCentre_M910s_-_10ML and likely no room in it for a water cooler. I have picked up a small (40mm?) fan to stick in the front, have to figure out the wiring as the fan has 3 wires and the header has 4 wires, also picked up a heat sink for the NVMe. Have to take it apart and add the components and clean it again. I use wood heat and the house is dusty:)
I also see that actually the CPU was faster then I mentioned, 3.4/3.8GHz.
It's a nice little computer, was C$80 used with no storage. Going to a lot of similar on the market as it is just a hair too old to run Win 11 being released in 2019.

May be you can change the ventirad (heat sink)
e.g. be quiet! Pure Rock LP   (very low profile but a high tdp value (100w) - your cpu is 65w  (this should reduce a lot max temperature)
The high should be good, you may check if the scare width of 92mm is okk too and that it didn't touch ram slots.

https://www.bequiet.com/fr/cpucooler/3992

2
Multimedia / Re: Updated Uniaud32 build
« on: April 26, 2025, 07:00:27 pm »
I give a try on this latest uniaudio driver. Well, it seems to work very well and better as the AOs 5.1.1 provided one !

3
Hi !

I agree, Paul did a very big and great job on QT6, webengine and the browser is very near to be usable all day.
I'm retired with some health problems and have missing knowledge in the language used for QT6 and OS2 API   

I'm sure that the free low shared memory issue, some silent crashes can be quickly resolved by a developer from ArcaNoae.
May be some issue could be connected with usb or audio drivers (interrupt handing?) - it mostly occurs when moving my usb mouse pointer or viewing youtube videos.   
   

4
As announced in the UNIAUD thread I created a video about Paul Smedleys great success so far with bringing Sound on the ASUS ROG Zephyrus G14 2024 alive.

Thanks Paul!

YOu can watch it here:

https://www.youtube.com/watch?v=IGrzGjOJPdI

Subtitles in different languages are available as this video is produced in German.

Hope you enjoy! All the best,

Sigurd

Critics and suggestions welcome!!

Hi !

I see you have Multithreading (SMT)  enabled !  (16 threads at OS/2 boot while this AMD proc has 8 cores )
Is it stable for you while it is recommended not using Multithreading (SMT) ?

Regards
Rémy 

5
Programming / Re: Qt6 Application Testing
« on: April 25, 2025, 12:12:04 pm »
Thanks! I downloaded and followed Martin's instructions and I have dooble-QT6 running.

Interesting observation: I wondered if I was missing some depenencies, so I ran PMDLL Qt6WebEn.dll

PMDLL does not do anything useful after that. Maybe it was never intended to work on such a complex DLL.

High Neil !

Know you having installed same build as I have and assume loaded highmem dlls.
I suppose on a SMP system.

Could you give a try opening up to 6 tabs using following links and monitor free shared low memory size after each full loaded tab. Thanks

- https://remydodin.levillage.com
- https://www.boursorama.com/bourse/indices/cours/1rPCAC/
- https://nsidc.org/sea-ice-today/sea-ice-tools/charctic-interactive-sea-ice-graph
- https://notrickszone.com/
- any other....   

Regards

6
Web applications / Re: Dooble releases, Qt5 builds
« on: April 22, 2025, 01:42:43 pm »
How was the low shared memory use issue resolved under QT5 ?
was any changes introduced into QT6 which could impact spawn, parent etc... ?

7
Web applications / Re: Dooble releases, Qt5 builds
« on: April 18, 2025, 11:59:22 pm »
The reality is that you have as much knowledge of the OS/2 API as I do.....

I only know Rexx programming and web php/html/css

8
Web applications / Re: Dooble releases, Qt5 builds
« on: April 17, 2025, 01:01:07 pm »

9
Web applications / Re: Dooble releases, Qt5 builds
« on: April 16, 2025, 08:19:34 pm »
Any idea how to go forward with this memory issue ?
As I wrote it, only the QT6 build has this problem. QT5 is ok

10
Web applications / Re: Dooble releases, Qt5 builds
« on: April 14, 2025, 02:00:59 pm »
Other problem.

I've found a site making Dooble close each time!
process used:  (using duckduckgo as default search engine)
entre wuwt  into the link field + enter
duckduckgo opens and first found entry is whattsupwiththat.com
Clic on this first found entry and wuwt start to load....
Wait until end of load.... before the end, Dooble closes

Which version of Dooble are you using? In the upstream version 2025.02.08 Duckduckgo and Google were "removed".

As you could read from the post - (all QT6 6.2.x and Dooble at latest available build level), I already posted a screenshot with build version 

Duckduckgo and Google are only removed from been used by the url input link or browser direct search entries but it isn't if you go to duckduckgo or google site and issue a search. You have the same result in any cases and no need to use a search engine, just type in the direct link of the site. 

11
Web applications / Re: Dooble releases, Qt5 builds
« on: April 13, 2025, 06:02:59 pm »
Other problem.

I've found a site making Dooble close each time!
process used:  (using duckduckgo as default search engine)
entre wuwt  into the link field + enter
duckduckgo opens and first found entry is whattsupwiththat.com
Clic on this first found entry and wuwt start to load....
Wait until end of load.... before the end, Dooble closes
 

12
Web applications / Re: Dooble releases, Qt5 builds
« on: April 13, 2025, 02:49:28 pm »
I had this webeng build and upgraded to the latest which has no dldlevel datas
23/01/25 10:00    114 242 124      0 a---  Qt6WebEn.dll

Of course, no change on the memory problem.

I do not preload OpenOffice.
I open firefox or TB only when needed or going to check emails but have clamav with the latest compatible virus definition file (pretty old now) loaded

Note: i7 5775c 5th gen !

13
Web applications / Re: Dooble releases, Qt5 builds
« on: April 13, 2025, 05:54:31 am »
OK, nothing recent. Here, I don't really get the low shared memory dropping, just high shared memory dropping, but I do have the DLL's marked high. I'm using Qt version 6.2.8 (runtime 6.2.11).
It still locks up too much for me to use it much. It's a shame dmik has moved on.

I too have Dlls marked high
QT 6.2.8 - runtime QT 6.2.11 and QT WE 6.2.6

I found a Dooble from 23-08-2023 and the problem still exist

Yes, it freezes the system often and it seems to be more often when playing audio or a lot of mouse gesture (moving the sidebar etc...)

System ARCAOS HW i7  (not under virtual machine)

14
Web applications / Re: Dooble releases, Qt5 builds
« on: April 13, 2025, 05:17:29 am »
I meant Dooble releases. This one saw using a profile on Qt6 to fix the visited links colour. Qt5 always used a profile.
Also how is the French translation working for you? There was an update, attached.

Thanks.

I could try the Dooble build from 22-08-2024 (same results)
I have an older one from 2023 (february) but this one never start due to missing QT6WIDGS

15
Web applications / Re: Dooble releases, Qt5 builds
« on: April 13, 2025, 03:27:14 am »
The problem exist under QT6.2.8 (test done yet) and up
I no more have previous QT6 builds (6.2.4 nor 6.2.6)

Pages: [1] 2 3 ... 59