Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Paul Smedley

Pages: 1 ... 65 66 [67] 68 69 ... 140
991
Multimedia / Re: Updated Uniaud32 build
« on: September 27, 2022, 12:28:35 am »
Hey Mark,

First of all auto-mute in Unimix was id20, not id19 (at least on HYPERFIRE .... I used the command "unimix -names" from a prompt, to find the correct setting - it varies, as Manticore II reported it at id23)

But I can report that I disabled it and ......... SOUND WORKS with the ALC892 chipset!!!!!!

command prompt line for me to disable ......... unimix -id20 -val0=0

So the problem is indeed auto-mute being enabled for this chipset by default.

However still one little drawback to solve - I have to re-enable that every time I reboot warm or cold. Do you know of a way of setting unimix to automatically apply that fix upon reboot?

Very brief reply for now... re: 'Auto Mute' I'm going to see if I can automatically disable it within soundmixer.c - I just need to spend some quality time reading the code and understanding how it works..

Cheers,

Paul.

992
Networking / Re: Squid Cache
« on: September 26, 2022, 11:07:20 am »
https://smedley.id.au/tmp/squid-5.7-os2-20220926.zip should fix the issues with 'squid -k shutdown' not working

993
Multimedia / Re: Updated Uniaud32 build
« on: September 26, 2022, 02:42:49 am »
Hi Eugene,
Paul in the two drops you asked to comment on. 20229018 is extremely buggy. PM123 really acts strange with this driver. It does work though. 20220924 acts much better and is stable for me.

That's really interesting - it does support what Andy commented - in that his change caused more problems than it solved.

Cheers,

Paul.

994
Multimedia / Re: Updated Uniaud32 build
« on: September 26, 2022, 12:07:47 am »
Hi roberto,

Quote
Wondering if there is any feedback from users running HDA hardware on differences (good or bad), between:
https://smedley.id.au/tmp/uniaud32-linux-5.19.9-20220924.zip
&
https://smedley.id.au/tmp/uniaud32-linux-5.19.9-20220918.zip
The ...924.zip is GOOD
The ...918.zip is Bad

Are you able to be a little more descriptive on what GOOD and Bad mean?

Cheers,

Paul.

995
Multimedia / Re: Mic/Line in with UniAud (3.0.1)
« on: September 25, 2022, 08:53:48 am »
OK... I will try and test with my Thinkpad T470s.... I'd love to know if mic/line in EVER worked with Uniaud.....

If you get a chance to run a 'testlog uniaud' with a debug driver, it would be interesting to see....

996
Networking / Re: Squid Cache
« on: September 25, 2022, 03:46:32 am »
Updated to latest source (v5.7) - https://smedley.id.au/tmp/squid-5.7-os2-20220925.zip

997
Multimedia / Re: Mic/Line in with UniAud (3.0.1)
« on: September 25, 2022, 01:29:22 am »
There's also aswitch.exe along with aswitchsetup.cmd, I believe on recent ArcaOS installs,
Code: [Select]
W:\MMOS2>aswitchsetup.cmd

 ASwitch makes your USB ports act like a headphone jack.
 It switches audio output from your built-in sound system
 to your USB headphones or speakers whenever you plug them
 in, and restores the default as soon as you unplug them.

 Would you like to install ASwitch? [y/n] n

Untested here, actually I thought it also enabled USB microphone
Sometime back I had a USB turntable that presented itself as an USB microphone which did work without any setup

Thinking out loud - I assume the Thinkpad T470s has a built-in mic - I guess I could try test with that....

998
Multimedia / Re: Mic/Line in with UniAud (3.0.1)
« on: September 25, 2022, 12:53:50 am »
Hi Jan-Erik
The new build(s) of UniAud show more and more of the built in sound card (ATI HDA, ALC888) functionality with unimix.
I'd like to use the now enabled/recognized Mic in and/or Line in, but "Digital Audio" recorder and the os2tk45 "Audio Recorder Sample" and "Direct Audio" samples either stall the computer or the application. VoiceType therefore can't enable input.

To be honest - I don't know if the inputs work on any versions of Uniaud - it would be good to hear from anyone if they used to work.

It may also be that Uniaud needs to be 'taught' how to connect the MMPM inputs to the appropriate ALSA/Uniaud inputs...

I'll try do some research on this topic.

Edit: a couple of old bug reports.... https://trac.netlabs.org/uniaud/ticket/224 and https://trac.netlabs.org/uniaud/ticket/97 indicate these problems have been around for a while

Edit2: uniaud readme talks about using the /m switch to enable mic input - are you using this?
Code: [Select]
DEVICE=x:\MMOS2\UNIAUD16.SYS /V /C /M /L
  - /V - Verbose
  - /C - Enable CD output
  - /M - Enable Microphone output
  - /L - Enable Line-In output
Default: /C ((verbose messages; CD output enabled)

Cheers,

Paul

999
Multimedia / Re: Updated Uniaud32 build
« on: September 25, 2022, 12:47:02 am »
Hey Ian,
I'm hoping that I will have a house to move into in the coming months, then I can unpack my stuff in storage and start using OS/2 again and be a bit more helpful :)
Either that or I'm going to start driving around Australia again!

Where abouts are you these days? still in WA? Thanks again for os2site - I was chasing down a copy of ndcrypt and the link at ecomstation.ru was borked - but sure enough os2site had a copy :)

Cheers,

Paul

1000
Networking / Re: Squid Cache
« on: September 25, 2022, 12:18:23 am »
https://smedley.id.au/tmp/squid-5.3-os2-20220925.zip should fix the commSetNonBlocking FD 10: (22) Invalid argument'

1001
Multimedia / Re: Updated Uniaud32 build
« on: September 24, 2022, 11:57:23 am »
Separate to the above post, I also updated the uniaud32-next branch to the 5.15.70 code - builds at https://smedley.id.au/tmp/uniaud32-linux-5.15.70-20220924.zip

1002
Multimedia / Re: Updated Uniaud32 build
« on: September 24, 2022, 11:37:54 am »
Hey All,

I just stumbled across https://www.os2world.com/forum/index.php?topic=2436.75;msg=26471 - specifically the message from Andy...

Seems I missed this message and didn't back out the code he suggested.

On a whim... please try https://smedley.id.au/tmp/uniaud32-linux-3.9-20220924.zip and see if it changes anything....

Meanwhile, I'm also interested in the results of setting auto-mute to 0.

Wondering if there is any feedback from users running HDA hardware on differences (good or bad), between:
https://smedley.id.au/tmp/uniaud32-linux-5.19.9-20220924.zip
&
https://smedley.id.au/tmp/uniaud32-linux-5.19.9-20220918.zip

The difference is the 0924 build has the patch that @Andy Willis suggested removing two years ago removed. I haven't committed the change yet, pending feedback.

Cheers,

Paul

1003
Networking / Re: Squid Cache
« on: September 24, 2022, 11:08:47 am »
Sorry for the long delay here.... I found the cause of the SIGILL - I believe this should be fixed in https://smedley.id.au/tmp/squid-5.3-os2-20220924.zip

Simply put, the configure script for squid tries to use 'native' cpu optimisation - which overrode my normal defaults.

PS the kerberos dependency should be gone too.

1004
Multimedia / Re: Updated Uniaud32 build
« on: September 24, 2022, 10:23:05 am »
...for Hyperfire with the driver from 3.9.11.... something like:
unimix -id19 -val0=0

19 is the control number for auto-mute from 'unimix -list'

1005
Multimedia / Re: Updated Uniaud32 build
« on: September 24, 2022, 05:13:38 am »
Hey!


I can't believe you didn't spot the deliberate typo? :) try https://smedley.id.au/tmp/uniaud32-linux-3.9-20220924.zip

Too much good Savignon Blanc my friend, and too nice a lovely Beef Stew courtesy of too lovely a wife, on a Friday night - need I say more?

M

Well that was unexpected! The only other bright idea is to use unimjx from the command line to toggle auto mute to 0.

Pages: 1 ... 65 66 [67] 68 69 ... 140