Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pete

Pages: 1 ... 72 73 [74] 75 76 ... 87
1096
Hi All

I seem to recall switching resolutions "on the fly" (without rebooting) was possible with a beta build of Scitech Display Doctor - but this ability disappeared in the release build. Sorry, cannot remember which SDD beta build and no longer have any of the SDD builds in my backup system.


Regards

Pete


1097
Hardware / Re: Under $90 upgrade for OS/2 review !
« on: May 17, 2015, 03:20:49 am »
Hi RBRI

Instead of rebooting when the screen comes up black/with flicker/compressed size simply turn off the monitor and then turn back on - works every time here.

I've been using dualcore/quadcore cpus with SNAP since 2004, or thereabouts, and have rarely had a Desktop freeze problem - guess I could just be lucky so far  :-)

However, it is definitely good news that SNAP will be getting updated as it will get more difficult over time to purchase good condition ATI X series cards supported by the current SNAP - and, of course, bug fixes are always welcome  :-)


Regards

Pete



1098
Hardware / Re: SoundBlaster SB4740 Driver (SB 4740)
« on: May 14, 2015, 12:46:18 am »
Hi klipp

It is definitely possible to have sound for guests in VPC for OS/2 - and you do not need a soundblaster to do it. I have had success with every onboard and PCI soundcard I've tried; it does not matter what the physical hardware is as long as it works OK - usually with uniaud - as VPC provides a *virtual SB16 soundcard" for Windows guests.

I have in my VPC root directory a file called sound.txt, I think I picked it up in an internet forum or newsgroup, which contains:-

Virtual PC for OS/2 by default disables sound for guest systems. This is done to prevent problems such as distorted sound, system traps, lockups, etc. due to buggy OS/2 sound drivers. For most sound drivers, it is recommended to not turn on sound support. The worst results can be experienced with the drivers from Crystal (ISA and PCI) - usually system traps. In case you have a sound driver that can handle small buffers and high interrupt rates well (e.g. Soundblaster Live! or UNIAUD from IBM), you can try to enable sound support.

To enable sound in VPC/2 guests type:

CD VIRTUALPC
VPCSETUP /TWEAKVPC
check "Enable Sound in virtual machines"

On the next restart of VPC, your guest should have sound (of course, you still have to install a SB16 sound driver in your guest... or in case of Win9x/2K/XP, let the autodetection find the virtual SB16 card and install the driver...)
voila!

[ 16 October 2002, 00:14: Message edited by: Oliver Stein ]

--------------------
Mfg/Regards,
Oliver Stein
InnoTek GmbH
ostein@innotek.de


Obviously the line "CD VIRTUALPC" would need to be changed to fit your system.


Hope the above is of help

Pete


1099
Hi Martin

Have a read through http://www.os2voice.org/VNL/past_issues/VNL0802H/vnewsf6.htm for an example of using rdc.

Regards

Pete

1100
Hardware / Re: SoundBlaster SB4740 Driver (SB 4740)
« on: May 12, 2015, 12:50:11 am »
Hi klipp

What does uniaud report during boot? - I use this line in config.sys to Pause boot and read (some) driver output:-

DEVICE=H:\OS2\BOOT\PauseIt.sys

To check uniaud output I would add the above line just after the DEVICE=H:\MMOS2\UNIAUD16.SYS /V /C line.

The file \OS2\BOOT\PauseIt.sys does not exist so boot stops with a complaint about a missing file and a "Press Enter to continue..." which allows plenty of time to note down driver output.

If the driver seems to identify the hardware and load fine then you need to check the mixer settings are OK. Use the following command in a command window open in \MMOS2:-

unimix -list > unimixer.txt

Open unimixer.txt, with a text editor, and check if playback switches and volume are set correctly; if not try to turn on switches/set volume levels.


I seem to recall the SB CT4740 card is an older card, Soundblaster 512?, and have vague memories of an older driver that *may* work if uniaud will not. A quick hunt through  http://www.os2usr.org/os2sound.html  suggests this is what I am thinking of http://hobbes.nmsu.edu/pub/os2/system/drivers/sound/sbliveos2-081b.zip


Hope something above helps

Pete

1101
Hi Martin

Sometimes you can open a file with a text editor to find out a little about the file:-

-  PMCTL.MSG  -  contains what looks like error messages; probably for PMCTLS.DLL
 
-  PMCTL.REP  -  contains what looks like the title
                         ' P M  C o n t r o l  T e m p l a t e  f i l e '
and is related to displaying messages from PMCTL.MSG


The text editor trick does not really help with DLL files though

-  PMMRGRES.DLL  -  contains the current "window theme"; this url may be of interest http://www.os2voice.org/VNL/past_issues/VNL0802H/vnewsf6.htm

-  PMVDMH.DLL  -  I could only guess at this; and my guess would probably be wrong...   :-)


Regards

Pete

1102
Applications / Re: Firefox plugins stop working
« on: May 09, 2015, 05:06:48 pm »
Hi Neil

Does Firefox have an Addons/Plugins Manager?  -  check that plugins are recognised and Enabled in the Profiles with the non-working plugins.

Silly question: What plugins do you have installed?

I ask because there do not seem to be many required; I only have mplayer and flash - I'll probably add IcedTea if/when it gets to GA. If you have old mmos2 plugins installed (Netscape Multimedia Pack?) I wonder if they could be causing problems.


Regards

Pete


1103
General Discussion / Re: Xeu/Mensys download
« on: May 02, 2015, 04:01:51 pm »
Hi All

Despite having 2 copies of eCS2.1 I can no longer download download the 2.1 iso files from Mensys as they are no longer listed in my Downloads. Looks like the usual "housekeeping cockups" by Mensys...

A contact for xeu is  shop@xeu.com


Regards

Pete

1104
Multimedia / Re: [Uniaud] No sound even if audio card is recognized
« on: April 30, 2015, 06:53:40 am »
Hi Mentore

I just tried unimix -powerget:-

[H:\MMOS2]unimix -powerget
Command line mixer for UNIAUD. Version 0.05
Copyright 2004,2005 by Netlabs.org
Written by Vlad Stelmahosky aka Vladest
Detected UNIAUD version 1.92
Detected 2 audio adapter(s)
power state: 0

[H:\MMOS2]


If power state: 0 is "Off" why do I have system sounds, audio playback from media players and seamonkey plugins?


I notice that we are using differnet builds of uniaud and unimix - I must get around to updating sometime.

I also notice that you are using a different uniaud to the build you thought you were using:-

Playing with unimix options on Uniaud 1.09.06 I tried the powerget option and got

[D:\]unimix -powerget
Command line mixer for UNIAUD32. Version 1.1
Detected UNIAUD version 2.02.01



I suggest checking that you have the correct \mmos2\dll\uniaud.dll to go with the installed build of uniaud as a mis-match could cause problems.

Have you got a list of mixer controls and checked if the required switches are enabled and volume levels set?



Regards

Pete


1105
Multimedia / Re: [Uniaud] No sound even if audio card is recognized
« on: April 27, 2015, 08:38:03 pm »
Hi Mentore

If System Sounds are not working make sure that there is a sound scheme selected - for some reason that setting seems to simply disappear every now and again to be replaced by <none> on my eCS2.1 system.

If that does not help I would guess that the problem is either no output volume or output is not enabled.

Try running this command:-

unimix -list > mixer.txt


Then open mixer.txt in an editor and look for the following Controls:-

[Master Playback Switch] - make sure it is On ie Value 1

[Master Playback Volume] - make sure it has a value (much) greater than 0; set it to max (probably 64) to make sure

You need to use unimix to set the values eg:-

unimix -id[whatever the id number of the control is] -val[value to set control to] -cnt[count value of the control to change]


Running this command will save the unimix "help" into a text file:-

unimix > unimix.txt


Hope the above is of some help


Regards

Pete





1106
Hardware / Re: Printer Question!
« on: April 26, 2015, 02:07:35 am »
Hi klipp

i suspect you will have to do some investigating to answer your question  :-)

This mfc looks like it *may* suit your needs http://store.hp.com/UKStore/Merch/Product.aspx?id=B3Q10A&opt=B19&sel=PRN#merch-tech-specs

Good luck on your mfc hunt - and let us know how you get on.


Regards

Pete

1107
General Discussion / Re: I might have messed up
« on: April 26, 2015, 01:58:18 am »
Hi David

I suspect that if the address is still good you will get your Registration back stamped with "Return to Sender: Unknown Addressee"    ;-)


Regards

Pete

1108
Multimedia / Re: Media Servers for OS/2 ?
« on: April 19, 2015, 10:57:28 pm »
Hi Dave

Looks like I need more than just the magic.dll installed then.

Guess I'll have to see what is required and where to install to.

The "WARNING: magic_load: could not find any magic files!" does not seem to cause any problems though.


Regards

Pete

1109
Multimedia / Re: Media Servers for OS/2 ?
« on: April 19, 2015, 10:45:07 pm »
Hi Greggory

DOH!

Sorry, in my haste to use the url I did not notice the rest of the details...

Note to self: Pay more attention  :-)


Regards

Pete

1110
Multimedia / Re: Media Servers for OS/2 ?
« on: April 19, 2015, 06:14:34 pm »
Hi Guys

On checking the Medfi Tomb Server output on starting I see:-

 2015-04-19 16:43:29 WARNING: magic_load: could not find any magic files!


What exactly are "magic files" in this instance?


Regards

Pete

Pages: 1 ... 72 73 [74] 75 76 ... 87