Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TeLLie

Pages: [1] 2 3 ... 15
Applications / Re: yum whatprovides. Does it work?
« on: November 16, 2023, 07:24:01 pm »
Hi Martin,
I use yum whatprovides */mmioos2
yum --noplugins -C provides */mmioos2*

Programming / Re: OPenchat
« on: November 14, 2023, 07:58:52 pm »
Hi David,

Thankz for looking this up, changing the dll indeed works now :P
I rarely remember in openchat you could have all chat windows just have in one window, i have now all windows seperated .
I wish i remember what option set them in 1 window

Greetz TeLLie

Applications / Re: Media-downloader
« on: October 01, 2023, 05:48:59 pm »
It should be in..

Programming / Re: Duplicate symbol error
« on: October 01, 2023, 10:54:21 am »
Hi Dave,
Did you look at the old ported smplayer sources by BWW, how they did it there, probably a lot off diff changes...
But you never know :)

Programming / OPenchat
« on: September 29, 2023, 11:38:09 pm »
Hi all,

Did someone tried to run openchat under ArcaNoae
I just tried it and it traps inmidityl..

09-29-2023  23:32:08  SYS3184  PID 005a  TID 0001  Slot 008a
EAX=fffffff3  EBX=00000003  ECX=00000000  EDX=ffffffff
ESI=fffffff3  EDI=1abfe3f4
DS=0053  DSACC=d0f3  DSLIM=bfffffff
ES=0053  ESACC=d0f3  ESLIM=bfffffff
FS=150b  FSACC=00f3  FSLIM=00000030
GS=0000  GSACC=****  GSLIM=********
CS:EIP=005b:000479c6  CSACC=d0df  CSLIM=bfffffff
SS:ESP=0053:000f86a0  SSACC=d0f3  SSLIM=bfffffff
EBP=000f8ff6  FLG=00010287

OPENCHAT-SMP.EXE 0003:000179c6

Programming / Re: dart.h
« on: September 26, 2023, 11:38:09 pm »
Hi Dave,

Did you look @
iirc Did Ko not handle the dart.h ?

Maybe i have it somewhere on a usb stick, have to look..

Applications / Re: OS/4 (technical details only)
« on: August 22, 2023, 03:12:30 pm »
Hi OS4

Ok, thankz for answer :)

Applications / Re: OS/4 (technical details only)
« on: August 22, 2023, 01:36:44 pm »

Arcaos 5.1 will have UEFI.
My new laptop have only UEFI
Will os4 works with UEFI

  Regards, Tellie

Web applications / Re: Dooble releases, Qt5 builds
« on: August 06, 2023, 09:20:51 pm »
I notice that the build from qt6 works here better then the Qt5 build.
I use my own doodle build from qt632...

And the url you showed works perfecto

Regards, Tellie

Applications / Re: New Laptop
« on: August 06, 2023, 10:49:23 am »
Hi all,

I like that everybody have suggestions about the mem problem, but i like to have answers or recommendations on my quesions about the laptop :)

Applications / Re: New Laptop
« on: August 06, 2023, 10:46:47 am »
I was wondering more if Tellie monitored his swap file. He must be swapping and hopefully has his swapfile on the ram disk.
When I built the qt5webengine, I found my system swapping even with 3.2 GB visible to the system so it is possible to swap even with lots of memory.

Hi DAve,
Yes i have a swapfile, and its on a ramdisk
Otherwise it would be much worse.

Applications / Re: New Laptop
« on: August 05, 2023, 05:54:13 pm »
Hi Os4user

I see often cc1plus.exe: out of memory allocating 65536 bytes after a total of 282394624 bytes

I see my 980 free maem in a few second to 0 free mem

Applications / New Laptop
« on: August 05, 2023, 04:16:06 pm »
Hi all,

I'm just curious what new laptop runs with Arcanoae.
1. What cpu is has
2. How much ram is seeing bij Arcanoae
3. Have to have UEFI (For ArcanoaE 5.1)
4. And have a Ethernetport, as there is no Wireless one

The rest is not that important as i will use it only for compiling.

As i have now a:
CPU: GenuineIntel 11th Gen Intel(R) Core(TM) i5-1135G7 @ 2.40GHz
CPU Speed: 2435 Mhz
CPU Count: 4
  Memory below 1MB: 624.00 KiB
  Memory between 1MB and 4GB: 1063.50 MiB
  Memory below 4GB: 1066.56 MiB
  Memory above 4GB: 14.74 GiB
As you can see i have only 1MIB as free mem.
When compiling things i have to reboot several times as i get often OUT of MeM

I like to buy a Medion Erazer Crawler E30 MD62472 (30034264)
This have a I5-1250H and also 16gigs mem (Hope it sees more Mem then the older one, but cannot check till i buy it )

Regards, Elbert

Programming / Re: Qt6 Development
« on: July 16, 2023, 02:29:58 pm »
Hi Paul,

When i use you're cmake build i get:

-- Configuring done
CMake Error at D:/qt632-src/qt6-base-os2/cmake/QtProcessConfigureArgs.cmake:963
  CMake exited with code Segmentation fault.

Any idea?

A update,
After a reboot I tried again, now it seems to compile further, now on 25%

Next error i see when building tools...

[D:\qt632-src\qt6-tools-os2\build]cmake --build . 2>&1 |tee make.out
[  0%] Built target Tools_timestamp
[  0%] Built target Linguist_lib_pri
[  0%] Built target Linguist_timestamp
[  0%] Automatic MOC for target lconvert
[  0%] Built target lconvert_autogen
Consolidate compiler generated dependencies of target lconvert
[  2%] Built target lconvert
[  2%] Automatic MOC for target lprodump
[  2%] Built target lprodump_autogen
[  2%] Running rcc for resource proparser
make.exe[2]: *** [src/linguist/lprodump/CMakeFiles/lprodump.dir/build.make:76: src/linguist/lprodump/.rcc/qrc_proparser.cpp] Bus error
make.exe[1]: *** [CMakeFiles/Makefile2:1617: src/linguist/lprodump/CMakeFiles/lprodump.dir/all] Error 2
make.exe: *** [Makefile:146: all] Error 2

Programming / Re: Qt6 Development
« on: July 16, 2023, 10:29:39 am »
Hi Paul,

I have build the Qt6.3.2
But now i see that i have build dll like:
D:\QT632-src\qt6-base-os2\build\lib>Dir *.dll
Qt6Conc6.dll  Qt6DBus6.dll  Qt6Netw6.dll  Qt6Sql6.dll   Qt6Widg6.dll
Qt6Core6.dll  Qt6Gui6.dll   Qt6Prin6.dll  Qt6Test6.dll  Qt6Xml6.dll

But you're own build has this:
Qt6Conct.dll  Qt6Netwk.dll  Qt6QuiCo.dll  Qt6UiTos.dll
Qt6Core.dll   Qt6Posig.dll  Qt6QuiD2.dll  Qt6WebCl.dll

Any idea why and how i get same file names as you have?

D:\QT632-src\qt6-base-os2>git checkout
Your branch is up to date with 'origin/6.3.x'.

Pages: [1] 2 3 ... 15