Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mauro

Pages: 1 2 3 [4] 5 6 ... 28
46
I'm curious to know why you've got a SYS0039 not ready message (for COMn !) instead the more expected SYS0021 not ready message ?

cannot directly give an answer but maybe my config.sys can tell why, I can provide it if useful to clarify

47
Hi mauro

I do not use Avxcat myself but would expect some sort of "exclude drive(s)" setting within the app to avoid the problem or, possibly, an entry in an ini file that could be changed...


Floppy drive D: is possibly a USB Floppy - if I am right you can get rid of this, if not needed, by changing the config.sys entry to
BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:0

You could also REM cd related drivers in the config.sys to "lose" drive F:

@ivan
Drive order looks OK to me - fixed drives above removable drives


Regards

Pete

Ok Pete, following your suggestion I obtained the exclusion of floppy drives and usb CD by REMMING the line

REM BASEDEV=USBCDROM.ADD

and also

BASEDEV=USBMSD.ADD  was remmed and replaced with the indicated string

BASEDEV=USBMSD.ADD /REMOVABLES:8 /FLOPPIES:0

this fixed the "not ready" drive alert when browsing the drives/volumes, and AVXCAT now let the folder been opened for files selection.

I thank you much

Thank you


48
Hi all, I'm having issues with Avxcat when trying to open a multimedia file.  Since it begins to scan for all available drives in the system, it closes the selection window with a system error alert as some drives are inoperative (not ready) like in my case D and F  but however present in the drives list.  I wish to exclude them from the list so that Avxcat can go on to target a multimedia file.
Can you suggest how to ?
Thank you

49
Applications / Re: AVxCAT (v2 into test)
« on: March 02, 2023, 08:51:38 pm »
Ok,

Most issue you have are due missing required dlls.
The problem is that RXFUNCQUERY() returns 1 if function isn't registered and 0 if it is.
If a new rxfuncquery is done after an add it returns 0 (if or if no dll available) and when the dll isn't present, the dllfunction call fail !

To be more verbose about missing dlls and not crash:
I updated AVxCAT and added a check into libpath + avxcat\dll path (this one is installed by package 2) and issue a message telling which required dlls are missing to start AVxCAT followed by an exit. I updated information about loaded dll and dll path into the Extra logs view. (menu view).

Package 2 from WPI updated too.

I just refreshed the 2.0.0.3 wpi link with the updates (02.03.2023)
Please, get the refreshed link

Regards
Rémy

it runs now!
Thank you for your assistance

50
Applications / Re: AVxCAT (v2 into test)
« on: March 01, 2023, 08:09:14 pm »
Hi mauro !

It should be resolved yet (no more need to add the dll into your libpath)
You can rename your saved avxcat.in_ to *.ini  (if not done yet, of course)
Install new WPI package only.
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_3.wpi

Regards
Rémy
Ok deinstalled previous and installed this one, also placed AVXCAT.INI in its original position. Now I've a DrRexx window error message as shown in the image, it is just a short text advice, no lines running-scrolling as before, ad then the specific 3175 system error warning after closing the DrRexx alert.

For what related to the screen format, I can select in the System Setup -see image- and that resolution selection has been specifically created by my need applying the VirtualBox Manager commandline to set a non-standard resolution, possible after the OS2 Virtualbox Guest Additions

51
Applications / Re: AVxCAT (v2 into test)
« on: February 28, 2023, 05:30:22 pm »



Latest build is installed.
May I suggest you following action please:
Rename AVxCAT.ini file from under C:\OS2 if you have it there (it should remain from V1) to AVxCAT.in_ and than, start AVxCAT again. If it works than redo the customization and send me your AVxCAT.in_ (older ini file) using my web site email link.
Regards

renamed AVXCAT.INI as indicated, no better change obtained, the further attempt to start the program just failed with same error described before.
After that, no other AVXCAT.INI has been created in the system. Anyway I posted the file attached to your email but am receiving back a notification of non-valid email address. Should I post it here?

Quote
Updt: What is your screen size ?  (>= 1024x768 mini)


1152 x 660 . It's a Virtualbox guest session window resized to fit inside my host window

52
Web applications / Re: Dooble releases, Qt5 builds
« on: February 27, 2023, 08:37:53 pm »
Wonder if it is actually SVG drawing the letters? Checking in SeaMonkey, which displays it fine,
Code: [Select]
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 180 35.77"><path d="M6.76,26.15V0H5.51L0,2.62V3.4L1.39,4.77V26.15C1.39,27.38,1.31,27.9,0,28v1.31h8.1V28C6.84,27.9,6.76,27.38,6.76,26.15Z"></path><path d="M22.34,25.55V16c0-4.1-2.43-6.16-7.11-6.16-3.66,0-6.13,1.86-6.13,4.42A2.64,2.64,0,0,0,11.76,17a2.14,2.14,0,0,0,2.35-2.22c0-1.57-1.4-2-1.4-2.48s.69-.82,1.58-.82c1.89,0,2.64.9,2.64,3.15v2.7L13.7,18.84C10.11,20.47,8.59,22,8.59,25a4.39,4.39,0,0,0,4.69,4.68,4.74,4.74,0,0,0,4-2.46,3.08,3.08,0,0,0,3.22,2.46,4.41,4.41,0,0,0,3.42-1.47V26.9a1.41,1.41,0,0,1-.76.24C22.62,27.14,22.34,26.66,22.34,25.55Zm-5.41-.8c0,1.2-.67,2.15-1.71,2.15s-1.59-.89-1.59-2.81c0-2.24.64-3.22,1.88-4.11l1.42-1Z"></path><path d="M49.46,22.43c-.75-5-2.43-6.8-6.06-7.55,4.49-.9,6.51-3.26,6.51-6.64,0-4.59-3.14-7.41-9.48-7.41H30.85V2.14C32.8,2.3,33,2.93,33,4.8V25.32c0,1.83-.48,2.5-2.15,2.66v1.31H41.26V28c-1.71-.16-2.15-.83-2.15-2.66v-9.8h.6a2.58,2.58,0,0,1,2.78,1.75c.55,2,.57,6.26,1.35,9s2.58,3.23,5,3.23a6.89,6.89,0,0,0,3.65-.91l-.07-1.31C50.8,27.66,50.15,27,49.46,22.43Zm-10-8.58h-.36V2.55h.49c3.27,0,4.08,1.73,4.08,5.92S42.85,13.85,39.47,13.85Z"></path><path d="M61.3,26.18c-2.44,0-4.12-2.56-4.32-8h8.66v-.6c0-4.92-2.69-7.74-6.33-7.74-4.28,0-7.62,3.89-7.62,10.25,0,6,3.18,9.64,7.5,9.64,3.22,0,5.29-1.66,6.59-4.93l-1.15-.85C63.7,25.42,62.83,26.18,61.3,26.18ZM59,11.49c1,0,1.7,1.23,1.7,4.42v.58H57C57.05,12.59,57.93,11.49,59,11.49Z"></path><path d="M77.41,9.86A5.1,5.1,0,0,0,73,12.33V9.86H71.8L66.29,12.1v.78l1.39,1.36V32.63c0,1.23-.08,1.75-1.43,1.83v1.31h8.27V34.46c-1.4-.08-1.48-.6-1.48-1.83V29.29a7,7,0,0,0,2.48.44c4.54,0,7.38-4.12,7.38-10.91C82.9,12.77,80.64,9.86,77.41,9.86ZM75,28C73.62,28,73,27,73,25.1V15.45c0-1.55.84-2.66,2-2.66,1.57,0,2.12,2.43,2.12,8.27C77.18,25.73,76.89,28,75,28Z"></path><path d="M98.87,24.88v-15H97.64l-5.33,1.26v1.11c1.08.44,1.2,1.33,1.2,2.87v9.14a2.22,2.22,0,0,1-2,2.46c-1.11,0-1.55-.75-1.55-2V9.86H88.7l-5.55,1.26v1.11c1.19.2,1.41,1.12,1.41,2.87v8.33c0,4.38,1.9,6.34,4.68,6.34a5,5,0,0,0,4.27-2.6v2.31h1.1l5.52-.82V27.34C99,27.1,98.87,26.76,98.87,24.88Z"></path><path d="M111.1,9.86a5.16,5.16,0,0,0-4.34,2.47V0h-1.25L100,2.62V3.4l1.38,1.37V27a10.45,10.45,0,0,0,7.51,2.69c4.86,0,7.71-4.12,7.71-10.91C116.62,12.77,114.36,9.86,111.1,9.86ZM108.68,28c-1.34,0-1.92-.91-1.92-2.46V15.45c0-1.55.84-2.66,2-2.66,1.57,0,2.12,2.43,2.12,8.27C110.9,25.73,110.61,28,108.68,28Z"></path><path d="M127.61,9.86a5.15,5.15,0,0,0-4.33,2.47V0H122l-5.5,2.62V3.4l1.39,1.37V27a10.45,10.45,0,0,0,7.51,2.69c4.86,0,7.71-4.12,7.71-10.91C133.14,12.77,130.88,9.86,127.61,9.86ZM125.2,28c-1.34,0-1.92-.91-1.92-2.46V15.45c0-1.55.84-2.66,2-2.66,1.58,0,2.13,2.43,2.13,8.27C127.42,25.73,127.13,28,125.2,28Z"></path><path d="M140.45,26.15V0H139.2l-5.5,2.62V3.4l1.39,1.37V26.15c0,1.23-.08,1.75-1.37,1.83v1.31h8.1V28C140.53,27.9,140.45,27.38,140.45,26.15Z"></path><path d="M146.61,7.2a2.95,2.95,0,1,0,0-5.89,3,3,0,0,0-3,3A3,3,0,0,0,146.61,7.2Z"></path><path d="M149.24,26.15V9.86H148l-5.51,2.24v.78l1.39,1.36V26.15c0,1.23-.08,1.75-1.37,1.83v1.31h8.1V28C149.32,27.9,149.24,27.38,149.24,26.15Z"></path><path d="M159.25,14.78A2.11,2.11,0,0,0,161.52,17a2.66,2.66,0,0,0,2.62-2.88c0-2.59-2.16-4.3-5.23-4.3-4.45,0-8.12,3.45-8.12,10.57,0,5.56,3,9.34,7.37,9.34,3.18,0,4.7-2.15,5.74-4.81L162.1,24c-.81,1.91-1.51,3-2.95,3-2.24,0-3.15-2.95-3.15-9.11,0-5.17,1.23-6.37,3-6.37.88,0,1.52.32,1.52.82S159.25,13.18,159.25,14.78Z"></path><path d="M179.24,27.14c-.55,0-.83-.48-.83-1.59V16c0-4.1-2.42-6.16-7.11-6.16-3.66,0-6.13,1.86-6.13,4.42A2.64,2.64,0,0,0,167.84,17a2.13,2.13,0,0,0,2.34-2.22c0-1.57-1.4-2-1.4-2.48s.7-.82,1.59-.82c1.88,0,2.63.9,2.63,3.15v2.7l-3.22,1.47c-3.6,1.63-5.12,3.19-5.12,6.17a4.39,4.39,0,0,0,4.69,4.68,4.74,4.74,0,0,0,4-2.46,3.08,3.08,0,0,0,3.22,2.46A4.41,4.41,0,0,0,180,28.22V26.9A1.41,1.41,0,0,1,179.24,27.14ZM173,24.75c0,1.2-.67,2.15-1.7,2.15s-1.59-.89-1.59-2.81c0-2.24.63-3.22,1.87-4.11L173,19Z"></path></svg>
So yes it is SVG.

I see.
Does it lead to a fix ?  Otherwise for me it is accettable also like this, as issue rarely occours in some pages header/title, not missing much.
Thanks

53
Applications / Re: AVxCAT (v2 into test)
« on: February 27, 2023, 06:57:00 pm »

Hi!

From the drrexx dialog, it looks that an initial call (I suppose to a loaded proc from dll) couldn't be satisfied and then, you've got all lines displaied into this dialog.
Do you have the new dll provided by AVxCAT v2 or did ou left the older one ?     
At which date did you download the package ?
Please, get the package again, no need to install the other zip file package (same level)
As well, what is the bldlevel of AVxCAT.exe ?

Thanks
Remy

Thanks for replying Remy. To begin again from a clean situation, I deinstalled the 1.5.4.1 version by WarpIn uninstaller routine.
Then I installed the wpi package
https://remydodin.levillage.org/doc/realisations/downloads/AVXCAT_S-2_0_0_1.wpi
You said no need to add-replace anything behind this, and it already gives the described issue when try to run it first time.
"Do you have the new dll provided by AVxCAT v2 or did ou left the older one " means I should separately provide-modify something after such installation? Maybe that could be the point.
As said previously, later this I also tried to copy both the avxcat_rep.zip content first, and then avxcat_new.zip content in the avxcat working directory (overwriting the same name files), each time attempting to run it again with no changes.

Build Level Display Facility Version 6.12.675 Sep 25 2001
(C) Copyright IBM Corporation 1993-2001
Signature:       @#Remy DODIN:2.0.0.1#@##1## 17 Feb 2023 19:36:20     ARCAOS-000
::::0.1::00017@@GA build'
Vendor:          Remy DODIN
Revision:        2.00.0.1
Date/Time:       17 Feb 2023 19:36:20
Build Machine:   ARCAOS-000
FixPak Version:  00017
File Version:    2.0
Description:     GA build'

54
Applications / Re: AVxCAT (v2 into test)
« on: February 26, 2023, 07:23:55 pm »
Hi Remy
I get this mistake when trying to start it.
REX0043: Error 43 running D:\AVXCAT\AVXCAT.EXE, line 17370: Routine not found
  1107 +++   Call _check_4GBdll_;
I understand that I am missing some DLL. This I can't find it.
« rxtnsion.dll » from Jan-Erik to support files above 4GiB limit (included)

Saludos


Hi Roberto,

Please get avxcat (updated exe file) and give it a try.
(Found a case which could result into the problem you have - dll not fully loaded !)
  https://remydodin.levillage.org/doc/realisations/downloads/avxcat_rep.zip

Link refreshed (get the file again if already downloaded)

wpi updated too..

Hi Remy, I had the old avxcat 1.5.4.1 on my Virtualbox vm, warp 4.52 guest, well running.
After read the post about the latest v2 wpi package, I downloaded and replaced the previous version, and after that also placed the new avxcat.EXE (in C:\APPS\AVXCAT\) as described to correct the initial issue occourred to Roberto.
But no luck, it gives error warnings both in the initial installation and in the new executable running.
First appears an auto-scrolling drRex window -see avxcat 2 err 1.jpg image- getting to over line 22000 and then desappearing.
After that appears the system error message, see avxcat 2 err 2.jpg image.
Can you catch a cause for the issue by my indications or maybe there's a log I can retrive to be more specific?
Thank you


55
Web applications / Re: Dooble release 2023 02 20, Qt5 build
« on: February 26, 2023, 06:30:53 pm »
It still gives -as in all previous installation cases- problem in some character display, especially occourring in titles, see image.

hi Mauro

Just in case I checked it out with the Windows version of Dooble, and it works, (check image) will this be an issue with the OS/2 port?

Regards

Hi Martin, just to know, is your Arcaos/OS2 version giving same issue as mine?

56
Web applications / Re: Dooble release 2023 02 20, Qt5 build
« on: February 26, 2023, 11:59:59 am »
Here's the latest release, https://c.gmx.com/@744346040190108571/40ZeKJSJSgGLbUu6yXMeWA
From the release notes,
Code: [Select]
Dooble 2023.02.25
Welcome to the 2023.02.25 release of Dooble. Corrections and new features are detailed below.
Allow empty Home URL.
Ignite a search from the address bar. GitHub ticket #160.
Search engine titles must be unique!
Played a bit trying to add more searches without much luck. Tools-->Search Engines...

Good , this executable version replacing the previous one solved the DNS site issue  :)
It still gives -as in all previous installation cases- problem in some character display, especially occourring in titles, see image.
thank you

57
Web applications / Re: Dooble release 2023 02 20, Qt5 build
« on: February 25, 2023, 08:53:45 pm »
have to say a much better-stable version than my previous installed.
Opens/supports a good choice of sites as linkedin, youtube, gmail, my company organization email, OS2 World Forum ad others.
2-3 browsing windows opened same time smoothly running, and when it reaches the maximum work limit (4-5 browsing windows same time) program just quit, no system traps as it did before.
Also when exit/close the program no system traps as it did before.
Good job, right direction.

this above was a successful test on a virtual machine (Virtualbox guest Warp 4.52) where I separately installed all QT5 environment and latest Python needed, with a standalone Dooble version learned on this forum in 2022 (not rpm). Swapped that executable version with this latest one , now well working as said.
Tried on another virtual machine with no previous QT5 environment installation wich now came by installing Dooble rpm package, and then swapped its executable with this latest, it normally opens/navigate any site after first run, but next time it does not resolve IP addresses anymore, like something prevents the translation. Do not understand which could be the cause.

58
Web applications / Re: Dooble release 2023 02 20, Qt5 build
« on: February 21, 2023, 08:03:31 am »
Tellie I ran from commmand line like yu recomended and says it can't find QT6. Well I guess that is the problem. LOL

You must have one of Paul's Qt6 builds. Mine is,
Code: [Select]
Dooble.exe   │ 3025589│16/02/23│ 2:47p

...but this version has built for working in QT5, right ?

59
Web applications / Re: Dooble release 2023 02 20, Qt5 build
« on: February 20, 2023, 09:48:40 pm »
have to say a much better-stable version than my previous installed.
Opens/supports a good choice of sites as linkedin, youtube, gmail, my company organization email, OS2 World Forum ad others.
2-3 browsing windows opened same time smoothly running, and when it reaches the maximum work limit (4-5 browsing windows same time) program just quit, no system traps as it did before.
Also when exit/close the program no system traps as it did before.
Good job, right direction.

60
notification sent yesterday from Arca Noae about new version of ANPM with some bug fix, maybe could apply to the case,  no idea if it solve the issue or not
https://www.arcanoae.com/arca-noae-package-manager-1-1-0-has-been-released/

Pages: 1 2 3 [4] 5 6 ... 28