Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Neil Waldhauer

Pages: [1] 2 3 ... 79
1
I'm running a Lenovo X13 laptop. I started out with a 2 TB M.2 NVMe, but later upgraded to a 4 TB M.2 NVMe.

2
Graphics and Window Design / icons with an X overlay
« on: March 02, 2026, 10:04:47 pm »
I'm attaching a photo of a screen where the icons have been decorated with a kind of X in the lower right corner. (see attachment)

What does it mean, and how do I get normal icons back?

3
Hardware / Re: Problem with Panorama resultion
« on: February 28, 2026, 04:21:16 pm »
It may be that the PC manufacturer fixed their CSM software that provides the Video BIOS. If you can update the BIOS, it might help.

4
Programming / Re: Please test os2emx-cross-toolchain
« on: February 22, 2026, 03:15:42 pm »
Hi Myung-Hun,

Thank you very much for this, it is ideal for me as I do most of my stuff under Ubuntu now, with OS/2 in a VirtualPC.
Will set it up and give it a try over the next week.

If you get a chance, try to build PMMail with this environment.

5
General Discussion / Re: What happened to Paul?
« on: February 15, 2026, 03:22:50 pm »
I miss having you in the OS/2 community, Paul. I hope you decide to rejoin us.

6
Applications / Re: Apache OpenOffice port updates?
« on: February 15, 2026, 03:21:48 pm »
Bitwise had both a C++ developer and fund-raising. What would you do differently?

7
Applications / Re: XTide
« on: January 18, 2026, 03:49:24 pm »
I unzipped the program files into a directory. I downloaded and extracted the harmonics file

https://flaterco.com/files/xtide/harmonics-dwf-20251228-free.tar.xz

I set and environment variable to the location of my harmonics file

Code: [Select]
set hfile_path=\suntanv6\apps\xtide\dist\harmonics-dwf-20251228-free.tcd
I ran the program, but I now get a message about time zone support.

Code: [Select]
tide -l "Santa Cruz"

Indexing \suntanv6\apps\xtide\dist\harmonics-dwf-20251228-free.tcd...
XTide Fatal Error:  BROKEN_ZONEINFO
Your platform appears to have broken time zone support.  You need to have a
reasonably modern version of the time zone database that is available from
http://www.iana.org/time-zones.

8
Applications / XTide
« on: January 17, 2026, 03:54:07 pm »
The XTide program shows the tide table for a particular location. It worked for years, but stopped a couple of weeks ago when the harmonics fiie expired.

http://hobbesarchive.com/?dir=%2F&stype=all&sort=type_name&search=xtide&submit=Search


It's still under development here:
https://flaterco.com/xtide/files.html

But there is no longer any OS/2 version.

Although it is an X program, there is also a command line version, tide.exe, which was more useful for OS/2.

Is there any hope for building the current release; at least the command line version?

9
Hardware / Re: Video memory cannot be assigned to 32-bit address!
« on: January 04, 2026, 03:46:07 pm »
For my Lenovo Thinkpad X13 Gen 2, the "Accessible to system" memory reported by mem /v is 2267 MB

And this is a "ThinkPad Ethernet Extension Adapter Gen 2" I am using for Ethernet. The X13 gen 2 and the T14s gen 2 share a hardware manual, so they are very similar.

I also have the Lenovo Thinkpad USB-C Doc Gen 2, so I plan to learn a lot more about USB support under ArcaOS.

10
Hardware / Re: Video memory cannot be assigned to 32-bit address!
« on: January 04, 2026, 04:55:35 am »
I need to correct my previous post. I changed the BIOS setting for video RAM from 512 MB to 256 MB, and ArcaOS can now run on the computer. The latest MultiMac32-E1000B driver supports the Ethernet port.

A Lenovo adapter is required to connect an Ethernet cable because the laptop is too thin to support a normal Ethernet connection.

11
Hardware / Video memory cannot be assigned to 32-bit address!
« on: January 03, 2026, 02:26:25 am »
I have a Lenovo Thinkpad X13 gen 2, and while I didn't get it to run ArcaOS, I was curious if it could be done.

It can't. (see attachment) Actually, it can. See correction below.


12
Storage / 4 TB hard drive
« on: December 27, 2025, 02:18:23 am »
The time finally arrived for a hard drive upgrade for my travel laptop. I mostly run ArcaOS, but occasionally Windows 11 for web browsing and hardware support. My ArcaOS computer hosts about 1.5 TB of data. I wanted to build a computer that runs ArcaOS in a VirtualBox session and holds a copy of that data. I backed up my computer, and installed a 4 TB NVMe m.2 2280 SSD. I restored from my backup.

(see attachment)

The backup software I used (EaseUS Partition Master) made the wrong volume type for my ArcaOS volumes, and so I needed to fix that. I was able to make some fresh ArcaOS Type 1 volumes and temporarily assign drive letters to the volumes with the wrong volume type. The new volumes are able to boot ArcaOS.

I extended the Windows boot volume to just over 3 TB, and created a new virtual hard drive to contain my data. I used rsync to bring over the 1.5 TB data to the new virtual hard drive. The virtual hard drive is actually a bit FASTER than JFS running native. It still took a long time to copy 1.5 TB of data.

When I was done, I deleted the volumes with the wrong volume type. This was a mistake, as my Windows 11 volume would no longer boot, failing with UMOUNTABLE_BOOT_VOLUME (0xED). It turns out that Windows boots the Nth volume on the drive, so it could no longer find the boot volume. I made two dummy volumes, and Windows was able to count up to 5 and boot again.

So far, the Virtual ArcaOS works well, and it's nice to have an easy way to share data between OS/2 and Windows 11.

13
Networking / Re: Network setup for VirtualBox
« on: December 21, 2025, 03:54:18 am »
Further experimentation. First, I say again that on Windows 11, NetBIOS works on adapter 2 as expected.

Setting Promiscuous mode has no effect, as far as I can tell.

Even TCP/IP on Adapter 2 does not work in Linux. I can swap adapter type, it makes no difference. And If I put NetBIOS on Adapter 1, it does work in Linux. But I have to have the adapter in bridged mode, so I have to choose the adapter. That means not supporting WiFi.

This sounds like a bug in VirtualBox. Adapter 2 works in Windows, but not in Linux.

14
Applications / Re: RSJ CDwriter question.
« on: December 18, 2025, 03:28:30 pm »
You can make DVD > 2 GB

The following statements extracted from one of my old DVD burning programs.

'@cdattach' DVDletter
'@cdwfmt' DVDletter '/erase'
'@cdcopy' tmpCDroot || '\*.*' DVDletter'\ /s > nul'
'@cdattach' DVDletter '-s'

15
Networking / Network setup for VirtualBox
« on: December 18, 2025, 01:06:02 am »
I've been using ArcaOS running under VirtualBox running on a Windows 11 host. Setting up the network is pretty confusing.

A laptop has a WiFi card and wired ethernet. I can connect either one to my network. I set up Adapter 1 as an Intel Pro/1000 MT desktop (NAT) so that it can get TCP/IP from either laptop interface.

But I want NetBIOS, too. I don't think I can get that from NAT. NAT is TCP/IP-only as far as I know. So I defined Adapter 2 as PCnet-FAST III (Bridged to the Ethernet interface on the laptop.) That only gives me NetBIOS over Ethernet, but that will be adequate. So far, so good.

But now I move to Linux host, and NetBIOS does not work. In fact, I'm not at all sure any Adapter 2 function works on Linux. Perhaps I should ask over in the VirtualBox forum, but there are more OS/2 experts here.

How are you implementing NetBIOS under VirtualBox?

Pages: [1] 2 3 ... 79