Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - R.M. Klippstein

Pages: [1] 2 3 ... 5
1
Applications / VLC 3.0.19 don't install !
« on: November 06, 2023, 10:53:17 pm »
Updated version of  VLC 3.0.19  on Hobbes, Startvlc.exe doesent start VLC. Anybody got a solution?
Thanks klipp

2
Setup & Installation / 5.1 and Samba/can't make it work!
« on: October 12, 2023, 01:39:57 am »
I can't get Arca Mapper Network Connections to function. After many tries using 3 machines I was unable to det the Network Browser to work I've tried using different settings for Protocol in SMB config and got nowhere.. Don't know what else to try. Anybody got any  luck with this new setup for Samba --- Thanks for any ideas.

klipp

3
General Discussion / arca 5.0.8 can-t bring up internet
« on: September 19, 2023, 11:58:20 pm »
Tail end of boot this id printed twice followed by @pres enter to continue.
OCTL {SIO CALIFADDR] : Invalid Argument    printed twice!
Iam trying  to get Internet connection but get Server not foung.  Samba works fine.

help   Thanks  klipp

Server works with 3 other boxes on the lan!

4
Setup & Installation / OS/4 Problem SVN6139
« on: June 07, 2022, 09:36:30 pm »
Latest OS/4 kernek (6139) istalled. Starts Boot then craps out with: SYS1719: The file E:\OS2Boot \PmDDK.SYS specified  i the *** statmet o n line 31 of the config.sys file does ot cotain a valid device driver or file system driver. Line 31 is ignored. Press enter to cotinue.
   I' guessing this because of the notice included with the installation instructions say "Patch" needs to be installed. It looks like www.gus.byusk.ru  has been down for a few days and remains that wey. So I don't know which patch is needed, is there another site these patches can be dowloaded from?

Thaks for any help you ca offer.    klipp

5
Applications / VLC Stutters on 5.0.7
« on: May 27, 2022, 10:11:20 pm »
VLC 3.0.16 (and older) is chopped and stuttering. MP3's play fine using PM123 , but MP4's & MP3''s are bad using 1 Processsor and get much worse when the number of processors are increased. This is on 2 machines running Linux with 2 virtual installs of 5.0.7 on each one.  I've probably forgotten to do something basic but can't figure out what that might be. I've tried enableing VT-x/AMD-V but no help there. I'm using a Bridged connection but don't think thats a problem, DOOABLE works GREAT!

Thanks in advance for any ideas!    klipp

6
Applications / ArcaOS 5.0.7 Samba
« on: December 15, 2021, 02:27:17 am »
Has anybody been able to make Samba work with 5.0.7? There is no lmhosts directory created on this install.

thanks  klipp

7
Applications / Arca 5.0.6 - lost status bar!
« on: January 19, 2021, 08:55:37 pm »
I must have screwed something up, I've lost my status bar. Clicking on "View" shows menu bar active, but status bar is greyed out!  Shared Directories still works but no updated menu bar with File,Machine,View,Input,Devices & help enteries. This is running ArcaOS 5.0.6 as a virtual machine.
Anybody got any ideas as to how to restore a status bar?

Thanks  klipp

8
Applications / Lost Amouse Widget
« on: September 13, 2020, 04:07:46 am »
I've suddenly lost my "AN Removable Widget Monitor" (ArcaOS 5.0.6). This has happened twice now, the first time I simply clicked on the taskbar and, add widget, and was able to select the Removable Widget and it re-created the widget on the taskbar. But now when trying to add the widget once more, the selection is no longer available in the add widget selection list.
Is there a way I can re-create this option in "add widget" and get back the removable widget so that I can once again use USB sticks?

klipp

9
Internet / socket () fails: Protocol family not supported
« on: August 27, 2020, 12:14:26 am »
I get this error iduring boot of ArcaOS 5.0.3. This is not a problem with ArcaOS 5.0.3 rather a problem with ME! I've inadvertantly screwed something up and have no idea how to attack this error.  Is it possible there is something I might copy from another ArcaOS install (I have 5.0.2 thru 5.05 installed   and working!) that would fix this problem?
Thanks for any ideas, I know next to nothing about sockets & Protocols.

klipp

10
Applications / Samba problem with ArcaOS 5.0.5
« on: August 22, 2020, 01:55:37 am »
I have SAMBA installed on two partitions 5.0.4 as drive D: and 5.0.5 as drive as drive C: alongside each other on the same ssd. 5.0.4 works great. using the identical setup steps for 5.0.5 Samba boots up but almost imeadiatly SMBD dies. It looks like the setup of the Samba passwords (I use root & root) is processed but don't actually work.. Selecting Samba users and groups won't open because it says the passwords aren't legiminate.
  Anybody got 5.0.5 setup and running w/o problems?

Thanks for any ideas.    klipp

11
Applications / clipgrab-lost my copy of QtNet4.dll
« on: July 01, 2020, 01:16:19 am »
Does anybody know where I can download a copy of Silvan's version of QtNet4.dll? I just lost mine in a Hard Disk crash!

Thanks  klipp

12
Applications / VirtualBox Shared Folders question
« on: April 25, 2020, 08:33:15 pm »
I'm running ArcaOS 5.0.4 as a virtual machine on SuSE Linux Tumbleweed. I have 2 installs of ArcaOS running, one on drive K: and the other on drive C:. Is there anyway I can share a folder and move files between these two drives?

Thanks for any advice

klipp

13
I've gotten this error on two different machines with ArcaOS 5.0.3 while changing the I.P: for use on my Lan. The I.P changes correctly and all is well, but on rebooting I always get the same error. I've been unable to figure out how to get rid of this error (it actually causes no problems, except for the halt it causes during booting) which is a PITA!
Any ideas would really be appreciated.  Thanks

klipp

14
Applications / Firefox 45.9 XUL.DLL error
« on: February 07, 2019, 01:41:22 am »
I just finally got around to updatng ANPM's listed necessary updates and re-booted and now Firefox 45.9 throws the error "Couldn't load XUL.DLL (OS2 error 87). Any ideas as to what is needed to make Firefox work once again?
Thanks for any responses

klipp

15
Applications / VirtualBox version 176 compiling/testing
« on: October 25, 2018, 11:31:10 pm »
@valerieus r176 on Netlabs won't compile for me using either OS4 kernel or IBM's  It gets to VBoxDD and fails on VBoxAcpi.o!

L:/176-vbox/src/VBox/Devices/PC/ACPI/VBoxAcpi.cpp:427:30: error: 'AmlCodeSsdtSta
ndard' was not declared in this scope
             pabAmlCode     = AmlCodeSsdtStandard;
                              ^
kmk: *** [L:/176-vbox/out/os2.x86/release/obj/VBoxDD/PC/ACPI/VBoxAcpi.o] Error 1

The failing command:
@g++.exe -c -Zomf -O2 -g -pipe -pedantic -Wshadow -Wshadow -Wall -Wextra -Wno-mi
ssing-field-initializers -Wno-unused -Wno-trigraphs -fdiagnostics-show-option -W
no-unused-parameter -Wlogical-op -Wno-long-long -Wno-long-long -Wno-delete-non-v
irtual-dtor -Wno-variadic-macros -march=i586 -O2 -mtune=generic -fno-omit-frame-
pointer -fno-strict-aliasing    -m32 -IL:/176-vbox/out/os2.x86/release/obj/VBoxD
D -IL:/176-vbox/src/VBox/HostDrivers/VBoxUSB/os2 -IL:/176-vbox/src/VBox/Devices/
build -IL:/176-vbox/src/VBox/Devices/Network/slirp -IL:/176-vbox/out/os2.x86/rel
ease/obj/VBoxDD/dtrace -IL:/176-vbox/include -IL:/176-vbox/out/os2.x86/release -
DVBOX -DVBOX_OSE -DVBOX_WITH_64_BITS_GUESTS -DVBOX_WITH_DEBUGGER -DRT_OS_OS2 -D_
_OS2__ -DRT_ARCH_X86 -D__X86__ -DIN_RING3 -DHC_ARCH_BITS=32 -DGC_ARCH_BITS=64 -D
VBOX_ACPI -DVBOX_HGCM_HOST_CODE -DVBOX_WITH_HGCM -DVBOX_WITH_DMI_CHASSIS -DVBOX_
WITH_DMI_OEMSTRINGS -DVBOXWDDM_WITH_VBVA -DVBOX_WITH_HGSMI -DVBOX_WITH_WDDM -DVB
OX_WITH_VMSVGA -DVBOX_WITH_VDMA -DVBOX_WITH_PXE_ROM -DVBOX_WITH_USB -DVBOX_WITH_
VUSB -DVBOX_WITH_INIP -DVBOX_WITH_E1000 -DVBOX_WITH_VIRTIO -DVBOX_WITH_UDPTUNNEL
 -DVBOX_WITH_NETSHAPER -DVBOX_WITH_AHCI -DIN_AHCI_R3 -DVBOX_WITH_BUSLOGIC -DVBOX
_WITH_LSILOGIC -DVBOX_WITH_PDM_ASYNC_COMPLETION -DVBOX_WITH_SCSI -DVBOX_WITH_EFI
 -DVBOX_WITH_MSI_DEVICES -DVBOX_WITH_NEW_PS2M -DVUSB_HAVE_USBPROXY_DEVICE -Wp,-M
D,L:/176-vbox/out/os2.x86/release/obj/VBoxDD/PC/ACPI/VBoxAcpi.o.dep -Wp,-MT,L:/1
76-vbox/out/os2.x86/release/obj/VBoxDD/PC/ACPI/VBoxAcpi.o -Wp,-MP -o L:/176-vbox
/out/os2.x86/release/obj/VBoxDD/PC/ACPI/VBoxAcpi.o L:/176-vbox/src/VBox/Devices/
PC/ACPI/VBoxAcpi.cpp
kmk: *** Waiting for unfinished jobs....
kmk: *** Exiting with status 2
#

Have I missed  including something?

Thanks   klipp.

Pages: [1] 2 3 ... 5