[sanei_debug] Setting debug level of dll to 255. [dll] sane_init: SANE dll backend version 1.0.13 from sane-backends 1.0.28 [dll] sane_init/read_dlld: attempting to open directory `x:\etc\sane.d/dll.d' [dll] sane_init/read_dlld: using config directory `x:\etc\sane.d/dll.d' [dll] sane_init/read_dlld: considering x:\etc\sane.d/dll.d/hpaio [dll] sane_init/read_config: reading dll.d/hpaio [dll] add_backend: adding backend `hpaio' [dll] sane_init/read_dlld: done. [dll] sane_init/read_config: reading dll.conf [dll] add_backend: adding backend `net' [dll] add_backend: adding backend `abaton' [dll] add_backend: adding backend `agfafocus' [dll] add_backend: adding backend `apple' [dll] add_backend: adding backend `avision' [dll] add_backend: adding backend `artec' [dll] add_backend: adding backend `artec_eplus48u' [dll] add_backend: adding backend `as6e' [dll] add_backend: adding backend `bh' [dll] add_backend: adding backend `canon' [dll] add_backend: adding backend `canon630u' [dll] add_backend: adding backend `canon_dr' [dll] add_backend: adding backend `cardscan' [dll] add_backend: adding backend `coolscan' [dll] add_backend: adding backend `coolscan3' [dll] add_backend: adding backend `dell1600n_net' [dll] add_backend: adding backend `dmc' [dll] add_backend: adding backend `epjitsu' [dll] add_backend: adding backend `epson2' [dll] add_backend: adding backend `epsonds' [dll] add_backend: adding backend `fujitsu' [dll] add_backend: adding backend `genesys' [dll] add_backend: adding backend `gt68xx' [dll] add_backend: adding backend `hp' [dll] add_backend: adding backend `hp3900' [dll] add_backend: adding backend `hpsj5s' [dll] add_backend: adding backend `hp3500' [dll] add_backend: adding backend `hp4200' [dll] add_backend: adding backend `hp5400' [dll] add_backend: adding backend `hp5590' [dll] add_backend: adding backend `hpljm1005' [dll] add_backend: adding backend `hs2p' [dll] add_backend: adding backend `ibm' [dll] add_backend: adding backend `kodak' [dll] add_backend: adding backend `kodakaio' [dll] add_backend: adding backend `kvs1025' [dll] add_backend: adding backend `kvs20xx' [dll] add_backend: adding backend `leo' [dll] add_backend: adding backend `lexmark' [dll] add_backend: adding backend `ma1509' [dll] add_backend: adding backend `magicolor' [dll] add_backend: adding backend `matsushita' [dll] add_backend: adding backend `microtek' [dll] add_backend: adding backend `microtek2' [dll] add_backend: adding backend `mustek' [dll] add_backend: adding backend `mustek_usb' [dll] add_backend: adding backend `mustek_usb2' [dll] add_backend: adding backend `nec' [dll] add_backend: adding backend `niash' [dll] add_backend: adding backend `pie' [dll] add_backend: adding backend `pint' [dll] add_backend: adding backend `pixma' [dll] add_backend: adding backend `plustek' [dll] add_backend: adding backend `qcam' [dll] add_backend: adding backend `ricoh' [dll] add_backend: adding backend `ricoh2' [dll] add_backend: adding backend `rts8891' [dll] add_backend: adding backend `s9036' [dll] add_backend: adding backend `sceptre' [dll] add_backend: adding backend `sharp' [dll] add_backend: adding backend `sm3600' [dll] add_backend: adding backend `sm3840' [dll] add_backend: adding backend `snapscan' [dll] add_backend: adding backend `sp15c' [dll] add_backend: adding backend `tamarack' [dll] add_backend: adding backend `teco1' [dll] add_backend: adding backend `teco2' [dll] add_backend: adding backend `teco3' [dll] add_backend: adding backend `u12' [dll] add_backend: adding backend `umax' [dll] add_backend: adding backend `umax1220u' [dll] add_backend: adding backend `v4l' [dll] add_backend: adding backend `xerox_mfp' Output format is not set, using pnm as a default. [dll] sane_get_devices [dll] load: searching backend `xerox_mfp' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/xex_mfp1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/xex_mfp1.dll' [dll] init: initializing backend `xerox_mfp' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `xerox_mfp' is version 1.0.13 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3324 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3325 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3326 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3327 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3331 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3332 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3409 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x340d [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x340e [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x340f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3412 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3413 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3419 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341a [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341c [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341d [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x341f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3420 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3421 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3425 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3426 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3427 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3428 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3429 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342a [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342c [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342d [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342e [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3430 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3432 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3433 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3434 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3435 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3437 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3439 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x343a [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x343b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x343c [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x343d [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x343f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3440 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3441 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3442 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3443 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3444 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3446 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x344b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x344f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3450 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3453 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3455 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3456 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3457 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x345a [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x345b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3460 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3461 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3466 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3468 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3469 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x346b [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x346f [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3471 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3477 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3478 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x347e [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3481 [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x3482 [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x3d5d [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x3da4 [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x420c [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x4265 [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x4293 [sanei_usb] sanei_usb_find_devices: vendor=0x0924, product=0x4294 [sanei_usb] sanei_usb_find_devices: vendor=0x413c, product=0x5124 [sanei_usb] sanei_usb_find_devices: vendor=0x413c, product=0x5310 [dll] load: searching backend `v4l' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/v4l1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/v4l1.dll' (No such file or directory) [dll] load: couldn't find backend `v4l' (No such file or directory) [dll] load: searching backend `umax1220u' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/um1220u1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/um1220u1.dll' [dll] init: initializing backend `umax1220u' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0030 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0130 [dll] init: backend `umax1220u' is version 1.0.2 [dll] load: searching backend `umax' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/umax1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/umax1.dll' [dll] init: initializing backend `umax' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0230 [sanei_usb] sanei_usb_open: trying to open device `/dev/usbscanner' [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list [dll] init: backend `umax' is version 1.0.45 [dll] load: searching backend `u12' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/u121.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/u121.dll' [dll] init: initializing backend `u12' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2004 [dll] init: backend `u12' is version 1.0.0 [dll] load: searching backend `teco3' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/teco31.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/teco31.dll' [dll] init: initializing backend `teco3' [dll] init: backend `teco3' is version 1.0.1 [dll] load: searching backend `teco2' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/teco21.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/teco21.dll' [dll] init: initializing backend `teco2' [dll] init: backend `teco2' is version 1.0.10 [dll] load: searching backend `teco1' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/teco11.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/teco11.dll' [dll] init: initializing backend `teco1' [dll] init: backend `teco1' is version 1.0.10 [dll] load: searching backend `tamarack' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/taarack1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/taarack1.dll' [dll] init: initializing backend `tamarack' [dll] init: backend `tamarack' is version 1.0.0 [dll] load: searching backend `sp15c' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/sp15c1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/sp15c1.dll' [dll] init: initializing backend `sp15c' [dll] init: backend `sp15c' is version 1.0.0 [dll] load: searching backend `snapscan' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/snpscan1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/snpscan1.dll' [dll] init: initializing backend `snapscan' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a20 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a26 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2022 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x1a2a [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2040 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2060 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x207e [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20be [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20c0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20b0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20de [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20f8 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fc [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x20fe [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2137 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0002 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2061 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2093 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2091 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2095 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x2097 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208d [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20ff [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x208f [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x20fd [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0114 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0121 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0122 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080c [dll] init: backend `snapscan' is version 1.4.53 [dll] load: searching backend `sm3840' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/sm38401.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/sm38401.dll' [dll] init: initializing backend `sm3840' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `sm3840' is version 1.0.0 [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x30d4 [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x30cf [dll] load: searching backend `sm3600' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/sm36001.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/sm36001.dll' [dll] init: initializing backend `sm3600' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40b3 [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40ca [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40ff [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40b8 [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40cb [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40dd [sanei_usb] sanei_usb_find_devices: vendor=0x05da, product=0x40ff [dll] init: backend `sm3600' is version 1.0.6 [dll] load: searching backend `sharp' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/sharp1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/sharp1.dll' [dll] init: initializing backend `sharp' [dll] init: backend `sharp' is version 1.0.0 [dll] load: searching backend `sceptre' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/sceptre1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/sceptre1.dll' [dll] init: initializing backend `sceptre' [dll] init: backend `sceptre' is version 1.0.10 [dll] load: searching backend `s9036' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/s90361.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/s90361.dll' [dll] init: initializing backend `s9036' [dll] init: backend `s9036' is version 1.0.0 [dll] load: searching backend `rts8891' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/rts88911.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/rts88911.dll' [dll] init: initializing backend `rts8891' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0705 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0805 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0070 [dll] init: backend `rts8891' is version 1.0.2401 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0705 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0805 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0070 [dll] load: searching backend `ricoh2' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/ricoh21.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/ricoh21.dll' [dll] init: initializing backend `ricoh2' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x05ca, product=0x042c [sanei_usb] sanei_usb_find_devices: vendor=0x05ca, product=0x0438 [sanei_usb] sanei_usb_find_devices: vendor=0x05ca, product=0x0448 [dll] init: backend `ricoh2' is version 1.0.0 [sanei_usb] sanei_usb_find_devices: vendor=0x05ca, product=0x042c [sanei_usb] sanei_usb_find_devices: vendor=0x05ca, product=0x0448 [dll] load: searching backend `ricoh' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/ricoh1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/ricoh1.dll' [dll] init: initializing backend `ricoh' [dll] init: backend `ricoh' is version 1.0.0 [dll] load: searching backend `qcam' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/qcam1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/qcam1.dll' (No such file or directory) [dll] load: couldn't find backend `qcam' (No such file or directory) [dll] load: searching backend `plustek' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/plustek1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/plustek1.dll' [dll] init: initializing backend `plustek' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0015 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0013 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0011 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0010 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0016 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0017 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0007 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x000f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0005 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0014 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0012 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1000 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0400, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2007 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2008 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2009 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2013 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2015 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2016 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0505 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0605 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011d [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0050 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0060 [sanei_usb] sanei_usb_find_devices: vendor=0x1606, product=0x0160 [sanei_usb] sanei_usb_find_devices: vendor=0x049f, product=0x001a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2206 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2207 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2208 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x220e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2220 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x4600 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x6620 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0427 [sanei_usb] sanei_usb_find_devices: vendor=0x0a53, product=0x1000 [sanei_usb] sanei_usb_find_devices: vendor=0x0a53, product=0x2000 [sanei_usb] sanei_usb_open: trying to open device `auto' [sanei_usb] sanei_usb_open: can't find device `auto' in list [dll] init: backend `plustek' is version 1.0.0 [dll] load: searching backend `pixma' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/pixma1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/pixma1.dll' [dll] init: initializing backend `pixma' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `pixma' is version 1.0.23 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1709 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x170a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x170b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x170c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1712 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x170d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x170e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1713 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x172b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1714 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1715 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1716 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1717 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1718 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1719 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1721 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1722 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1723 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1724 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1725 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1727 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1728 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1729 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x172c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x171c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x172e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x172f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1730 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1731 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1732 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1733 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1734 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1736 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1737 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1735 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1741 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1742 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1743 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x174d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x174e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x174f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1750 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x173b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1746 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1747 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1748 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1749 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x174a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1751 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1752 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1753 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1754 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1755 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1757 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1758 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1759 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1763 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1761 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1767 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x175f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1760 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1762 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1764 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1765 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1766 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1768 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1769 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1771 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1770 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x176f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1772 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1774 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1775 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1776 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1777 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1778 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1793 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1779 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1792 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x177a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x177b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x177c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x177e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x177f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1780 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1788 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1787 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1789 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1794 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1795 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x179f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1800 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1801 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1802 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x180b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x180c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x181e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x181d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1822 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1825 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1827 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1828 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x178f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1790 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1820 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1823 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1824 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x185c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1912 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1913 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1821 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x183b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x183d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x183e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x183f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1840 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1841 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1842 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1843 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1844 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1845 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1846 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1847 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1854 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1855 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1856 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1857 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1858 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1859 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x185a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x185b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x185d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x185e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1873 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1706 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1708 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1707 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2635 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x261f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x263c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x263d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x263f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x263e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2630 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x264d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x262f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x264c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x265d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x265e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x265f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2660 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26e6 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x171a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x171b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1726 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1901 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x172d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1740 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1908 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x174b [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1756 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190d [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26b5 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26a3 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26b0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26ef [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26ed [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26ec [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26ee [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26b4 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2684 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2686 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2737 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2738 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2736 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2759 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2774 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2773 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x275a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2779 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2708 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2775 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x264e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x264f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2659 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2707 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26f9 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x26fa [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2742 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2743 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x277a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x278e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27a6 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27a8 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27a9 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27b4 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27c0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27c2 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27d1 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27d2 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e1 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e4 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e5 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e2 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e5 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27e8 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27ed [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27f0 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27f1 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27f4 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27fb [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x27fe [dll] load: searching backend `pint' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/pint1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/pint1.dll' (No such file or directory) [dll] load: couldn't find backend `pint' (No such file or directory) [dll] load: searching backend `pie' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/pie1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/pie1.dll' [dll] init: initializing backend `pie' [dll] init: backend `pie' is version 1.0.9 [dll] load: searching backend `niash' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/niash1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/niash1.dll' [dll] init: initializing backend `niash' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0205 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0405 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0305 [sanei_usb] sanei_usb_find_devices: vendor=0x047b, product=0x1002 [sanei_usb] sanei_usb_find_devices: vendor=0x06bd, product=0x0100 [sanei_usb] sanei_usb_find_devices: vendor=0x047b, product=0x1000 [dll] init: backend `niash' is version 1.0.1 [dll] load: searching backend `nec' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/nec1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/nec1.dll' [dll] init: initializing backend `nec' [dll] init: backend `nec' is version 1.0.0 [dll] load: searching backend `mustek_usb2' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/mu_usb21.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/mu_usb21.dll' (No such file or directory) [dll] load: couldn't find backend `mustek_usb2' (No such file or directory) [dll] load: searching backend `mustek_usb' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/muk_usb1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/muk_usb1.dll' [dll] init: initializing backend `mustek_usb' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0006 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0001 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0008 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0002 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0873 [dll] init: backend `mustek_usb' is version 1.0.18 [dll] load: searching backend `mustek' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/mustek1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/mustek1.dll' (No such file or directory) [dll] load: couldn't find backend `mustek' (No such file or directory) [dll] load: searching backend `microtek2' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/miotek21.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/miotek21.dll' [dll] init: initializing backend `microtek2' [dll] init: backend `microtek2' is version 1.0.0 [dll] load: searching backend `microtek' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/mirotek1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/mirotek1.dll' [dll] init: initializing backend `microtek' [dll] init: backend `microtek' is version 1.0.0 [dll] load: searching backend `matsushita' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/mashita1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/mashita1.dll' [dll] init: initializing backend `matsushita' [dll] init: backend `matsushita' is version 1.0.7 [dll] load: searching backend `magicolor' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/macolor1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/macolor1.dll' [dll] init: initializing backend `magicolor' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `magicolor' is version 1.0.1 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x132b, product=0x2089 [sanei_usb] sanei_usb_find_devices: vendor=0x132b, product=0x2079 [sanei_usb] sanei_usb_find_devices: vendor=0x132b, product=0x0000 [dll] load: searching backend `ma1509' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/ma15091.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/ma15091.dll' [dll] init: initializing backend `ma1509' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0010 [dll] init: backend `ma1509' is version 1.0.3 [dll] load: searching backend `lexmark' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/lexmark1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/lexmark1.dll' [dll] init: initializing backend `lexmark' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x007c [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x007d [sanei_usb] sanei_usb_find_devices: vendor=0x413c, product=0x5105 [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x0060 [dll] init: backend `lexmark' is version 1.0.32 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x007c [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x007d [sanei_usb] sanei_usb_find_devices: vendor=0x413c, product=0x5105 [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x0060 [dll] load: searching backend `leo' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/leo1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/leo1.dll' [dll] init: initializing backend `leo' [dll] init: backend `leo' is version 1.0.11 [dll] load: searching backend `kvs20xx' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/kvs20xx1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/kvs20xx1.dll' [dll] init: initializing backend `kvs20xx' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `kvs20xx' is version 1.0.2 [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0xdeadbeef [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0xdeadbeee [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1000 [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1001 [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x100a [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1009 [dll] load: searching backend `kvs1025' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/kvs10251.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/kvs10251.dll' [dll] init: initializing backend `kvs1025' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1007 [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1006 [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x1010 [dll] init: backend `kvs1025' is version 1.0.5 [dll] load: searching backend `kodakaio' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/koakaio1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/koakaio1.dll' [dll] init: initializing backend `kodakaio' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `kodakaio' is version 1.0.3 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x9999 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4025 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4026 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4027 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4028 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4031 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4032 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x403e [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x403f [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4041 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4043 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4053 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4054 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4056 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4057 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4058 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4059 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x405d [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x405e [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4060 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4062 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4063 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4064 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4065 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4066 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4067 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x4069 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x406d [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x0000 [dll] load: searching backend `kodak' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/kodak1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/kodak1.dll' [dll] init: initializing backend `kodak' [dll] init: backend `kodak' is version 1.0.7 [dll] load: searching backend `ibm' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/ibm1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/ibm1.dll' [dll] init: initializing backend `ibm' [dll] init: backend `ibm' is version 1.0.0 [dll] load: searching backend `hs2p' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hs2p1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hs2p1.dll' [dll] init: initializing backend `hs2p' [dll] init: backend `hs2p' is version 1.0.0 [dll] load: searching backend `hpljm1005' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hpm10051.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hpm10051.dll' [dll] init: initializing backend `hpljm1005' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `hpljm1005' is version 1.0.1 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x3b17 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x5617 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x5717 [dll] load: searching backend `hp5590' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp55901.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp55901.dll' [dll] init: initializing backend `hp5590' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1305 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1205 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1705 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1805 [dll] init: backend `hp5590' is version 1.0.8 [dll] load: searching backend `hp5400' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp54001.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp54001.dll' [dll] init: initializing backend `hp5400' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1005 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1105 [dll] init: backend `hp5400' is version 1.0.3 [dll] load: searching backend `hp4200' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp42001.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp42001.dll' [dll] init: initializing backend `hp4200' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0105 [dll] init: backend `hp4200' is version 1.0.0 [dll] load: searching backend `hp3500' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp35001.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp35001.dll' [dll] init: initializing backend `hp3500' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2205 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2005 [dll] init: backend `hp3500' is version 1.0.0 [dll] load: searching backend `hpsj5s' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hpsj5s1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/hpsj5s1.dll' (No such file or directory) [dll] load: couldn't find backend `hpsj5s' (No such file or directory) [dll] load: searching backend `hp3900' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp39001.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp39001.dll' [dll] init: initializing backend `hp3900' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2605 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2305 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2405 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4105 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x2805 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4205 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4305 [sanei_usb] sanei_usb_find_devices: vendor=0x06dc, product=0x0020 [sanei_usb] sanei_usb_find_devices: vendor=0x04a5, product=0x2211 [dll] init: backend `hp3900' is version 1.0.0 [dll] load: searching backend `hp' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hp1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hp1.dll' [dll] init: initializing backend `hp' [dll] init: backend `hp' is version 1.0.8 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0101 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0401 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0201 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0601 [dll] load: searching backend `gt68xx' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/gt68xx1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/gt68xx1.dll' [dll] init: initializing backend `gt68xx' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x05d8, product=0x4002 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021e [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0218 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0219 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021a [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021d [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021f [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021c [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021b [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0210 [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x002d [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0401 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0400 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0402 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0403 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x040b [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x040e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0412 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x045f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0462 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x046e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0413 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0422 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0454 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2021 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2011 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201b [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2017 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201a [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201d [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201f [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2014 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201e [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0444 [dll] init: backend `gt68xx' is version 1.0.84 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x05d8, product=0x4002 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021e [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0218 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0219 [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021a [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021d [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021f [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021c [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x021b [sanei_usb] sanei_usb_find_devices: vendor=0x055f, product=0x0210 [sanei_usb] sanei_usb_find_devices: vendor=0x043d, product=0x002d [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0401 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0400 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0402 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0403 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x040b [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x040e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0412 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x045f [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0462 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x046e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0413 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0422 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0454 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2021 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2011 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201b [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2017 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201a [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201d [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201f [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x2014 [sanei_usb] sanei_usb_find_devices: vendor=0x0458, product=0x201e [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0444 [dll] load: searching backend `genesys' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/genesys1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/genesys1.dll' [dll] init: initializing backend `genesys' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0a01 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1405 [sanei_usb] sanei_usb_find_devices: vendor=0x0461, product=0x0377 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0901 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2213 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x221c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2214 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2228 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1904 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1909 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1905 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1906 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1907 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1906 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2229 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0426 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0474 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x4803 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0494 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049b [sanei_usb] sanei_usb_find_devices: vendor=0x0a17, product=0x3210 [sanei_usb] sanei_usb_find_devices: vendor=0x04f9, product=0x2038 [sanei_usb] sanei_usb_find_devices: vendor=0x1dcc, product=0x4812 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x4800 [sanei_usb] sanei_usb_find_devices: vendor=0x1dcc, product=0x4810 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x480c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0229 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x04ac [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x100f [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1b05 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4505 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4605 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0900 [sanei_usb] sanei_usb_find_devices: vendor=0x0461, product=0x038b [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4705 [sanei_usb] sanei_usb_find_devices: vendor=0x1803, product=0x162e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x1300 [dll] init: backend `genesys' is version 1.0.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0a01 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1405 [sanei_usb] sanei_usb_find_devices: vendor=0x0461, product=0x0377 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0901 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2213 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x221c [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2214 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2228 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1904 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1909 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1905 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1906 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1907 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190e [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x190f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1906 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2229 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0426 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0474 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x4803 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0494 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049b [sanei_usb] sanei_usb_find_devices: vendor=0x0a17, product=0x3210 [sanei_usb] sanei_usb_find_devices: vendor=0x04f9, product=0x2038 [sanei_usb] sanei_usb_find_devices: vendor=0x1dcc, product=0x4812 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x4800 [sanei_usb] sanei_usb_find_devices: vendor=0x1dcc, product=0x4810 [sanei_usb] sanei_usb_find_devices: vendor=0x0a82, product=0x480c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0229 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x04ac [sanei_usb] sanei_usb_find_devices: vendor=0x04da, product=0x100f [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x1b05 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4505 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4605 [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x0900 [sanei_usb] sanei_usb_find_devices: vendor=0x0461, product=0x038b [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x4705 [sanei_usb] sanei_usb_find_devices: vendor=0x1803, product=0x162e [sanei_usb] sanei_usb_find_devices: vendor=0x07b3, product=0x1300 [dll] load: searching backend `fujitsu' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/fujitsu1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/fujitsu1.dll' [dll] init: initializing backend `fujitsu' [dll] init: backend `fujitsu' is version 1.0.134 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1041 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1042 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1078 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1095 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1096 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1097 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10ad [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10ae [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10af [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10cf [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10e0 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10e1 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10e2 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10e6 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10e7 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10f2 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10fe [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1135 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x114a [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x114d [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x114e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x114f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1150 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1155 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x116f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1174 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1175 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1176 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1177 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1178 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x119d [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x119e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11a2 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11f1 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11f2 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11f3 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11f4 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11fc [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1213 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x128e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x132b [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x132c [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x132d [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x132e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x132f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x13f3 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x13f4 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x145f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1460 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1461 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1462 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1463 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1464 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x146b [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x146c [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x146d [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x146e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x146f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14ac [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14b8 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14bd [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14be [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14df [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e0 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e1 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e2 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e3 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e4 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e5 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e6 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e7 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x14e8 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x151e [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x151f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1520 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1521 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1522 [dll] load: searching backend `epsonds' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/epsonds1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/epsonds1.dll' [dll] init: initializing backend `epsonds' [sanei_debug] Setting debug level of epsonds to 255. [epsonds] sane_epsonds_init: sane-backends 1.0.28 [epsonds] epsonds backend, version 1.1.0 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `epsonds' is version 1.0.0 [epsonds] ** sane_epsonds_get_devices [epsonds] probe_devices [epsonds] attach_one_config: len = 3, line = usb [epsonds] probing usb devices [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0145 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0146 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x014c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x014d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0150 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0152 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0154 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08bc [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08cc [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0000 [epsonds] attach_one_config: len = 17, line = net autodiscovery [epsonds] e2_network_discovery, sent discovery packet [epsonds] response from 192.168.10.174 [epsonds] attach_one_net: dev = 192.168.10.174 [epsonds] attach: devname = net:192.168.10.174, type = 2 [epsonds] device_detect, net:192.168.10.174, type: 2 [epsonds] open_scanner: net:192.168.10.174 [epsonds] awaiting welcome message [epsonds] eds_recv: size = 3, buf = 0x12f4f3 [epsonds] epsonds_net_read: wanted = 3, available = 5 [epsonds] epsonds_net_read: long tail [epsonds] eds_recv: expected = 3, got = 0, canceling: 0 [epsonds] e2_network_discovery, end [epsonds] sane_epsonds_get_devices - results: [dll] load: searching backend `epson2' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/epson21.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/epson21.dll' [dll] init: initializing backend `epson2' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `epson2' is version 1.0.124 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0101 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0103 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0104 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0105 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0106 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0107 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0109 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x010e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0110 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x1116 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0112 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x1120 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x1121 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x113d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x011e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0126 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0128 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0129 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x012c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0135 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0138 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x014b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0151 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x015b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0801 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0802 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0805 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0806 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0807 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0808 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x080f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0810 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0811 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0813 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0814 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0815 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0817 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0818 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0819 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x081f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0820 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0827 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0828 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0829 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x082f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0830 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0833 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0834 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0835 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0836 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0837 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0838 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0839 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x083c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0841 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0843 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0844 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0846 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0847 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0848 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0849 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x084f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0850 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0851 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0852 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0853 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0854 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0855 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0856 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x085c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x085d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x085e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x085f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0860 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0861 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0862 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0863 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0864 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0865 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0866 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0869 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x086a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0870 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0871 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0872 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0873 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0878 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0879 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x087b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x087c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x087d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x087e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x087f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0880 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0881 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0883 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0884 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0885 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x088d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x088f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0890 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0891 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0892 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0893 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0894 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0895 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0896 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0897 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0898 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0899 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089a [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089b [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089c [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089d [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089e [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x089f [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a0 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a1 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a5 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a6 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a7 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a8 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08a9 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08aa [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08ab [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08ac [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08ad [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08ae [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08af [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b0 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b3 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b4 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b5 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b6 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b7 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b8 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08b9 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08bd [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08be [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08bf [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c0 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c1 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c3 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c4 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c5 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c6 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c7 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c8 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08c9 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08ca [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08cd [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x08d0 [sanei_usb] sanei_usb_find_devices: vendor=0x04b8, product=0x0000 [dll] load: searching backend `epjitsu' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/epjitsu1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/epjitsu1.dll' [dll] init: initializing backend `epjitsu' [dll] init: backend `epjitsu' is version 1.0.31 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10c7 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1156 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x117f [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11bd [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x11ed [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1200 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x128d [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1447 [dll] load: searching backend `dmc' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/dmc1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/dmc1.dll' [dll] init: initializing backend `dmc' [dll] init: backend `dmc' is version 1.0.0 [dll] load: searching backend `dell1600n_net' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/den_net1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/den_net1.dll' (No such file or directory) [dll] load: couldn't find backend `dell1600n_net' (No such file or directory) [dll] load: searching backend `coolscan3' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/coscan31.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/coscan31.dll' (No such file or directory) [dll] load: couldn't find backend `coolscan3' (No such file or directory) [dll] load: searching backend `coolscan' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/colscan1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/colscan1.dll' [dll] init: initializing backend `coolscan' [dll] init: backend `coolscan' is version 1.0.0 [dll] load: searching backend `cardscan' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/cadscan1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/cadscan1.dll' [dll] init: initializing backend `cardscan' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [dll] init: backend `cardscan' is version 1.0.3 [sanei_usb] sanei_usb_find_devices: vendor=0x08f0, product=0x0005 [sanei_usb] sanei_usb_find_devices: vendor=0x0451, product=0x6250 [sanei_usb] sanei_usb_find_devices: vendor=0x08f0, product=0x0002 [dll] load: searching backend `canon_dr' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/caon_dr1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/caon_dr1.dll' [dll] init: initializing backend `canon_dr' [dll] init: backend `canon_dr' is version 1.0.57 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1601 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1602 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1603 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1604 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1606 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1607 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1608 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x1609 [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x160a [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x160b [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x160c [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x160f [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2222 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1614 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1617 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1618 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x161a [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x161b [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x161d [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1620 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1622 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1623 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1624 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1626 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x162b [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x162c [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1638 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1639 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x163e [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x163f [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1640 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1641 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1646 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1648 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x164a [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x164b [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x164c [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x164f [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1650 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1651 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1652 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1654 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1657 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1658 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x1659 [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x165b [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x165d [sanei_usb] sanei_usb_find_devices: vendor=0x1083, product=0x165f [dll] load: searching backend `canon630u' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/can630u1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/can630u1.dll' [dll] init: initializing backend `canon630u' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x04a9, product=0x2204 [dll] init: backend `canon630u' is version 1.0.1 [dll] load: searching backend `canon' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/canon1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/canon1.dll' [dll] init: initializing backend `canon' [dll] init: backend `canon' is version 1.0.0 [dll] load: searching backend `bh' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/bh1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/bh1.dll' [dll] init: initializing backend `bh' [dll] init: backend `bh' is version 1.0.4 [dll] load: searching backend `as6e' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/as6e1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/as6e1.dll' [dll] init: initializing backend `as6e' [dll] load: searching backend `artec_eplus48u' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/arus48u1.dll' [dll] load: couldn't open `/@unixroot/usr/lib/sane/arus48u1.dll' (No such file or directory) [dll] load: couldn't find backend `artec_eplus48u' (No such file or directory) [dll] load: searching backend `artec' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/artec1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/artec1.dll' [dll] init: initializing backend `artec' [dll] init: backend `artec' is version 1.0.0 [dll] load: searching backend `avision' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/avision1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/avision1.dll' [dll] init: initializing backend `avision' [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_init: initializing libusb-1.0 [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: add dn 0 with libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: add dn 1 with libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a27 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a3c [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a33 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a93 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a24 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a25 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a3a [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2f [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x1a35 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a23 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2a [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2b [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x1a31 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2c [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2d [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a94 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a18 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a18 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a5e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a41 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a16 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a13 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4f [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a65 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a66 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a82 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a84 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4d [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a40 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a68 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a61 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0aa1 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a45 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0701 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0701 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0801 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0b01 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x3905 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x3805 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x026a [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x4004 [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x400d [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x400e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a15 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a16 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1029 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10ef [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6001 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6002 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6003 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6004 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6005 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0268 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0424 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0491 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0479 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048f [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0420 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0421 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047a [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0422 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0390 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047b [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0423 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0493 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0497 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0498 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0499 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0477 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049d [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0448 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0490 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0449 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0476 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x044c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048d [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x04a7 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0475 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048e [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0446 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0495 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0447 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0492 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0478 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049a [sanei_usb] sanei_usb_find_devices: vendor=0x0482, product=0x0335 [dll] init: backend `avision' is version 1.0.297 [sanei_debug] Setting debug level of sanei_usb to 255. [sanei_usb] sanei_usb_scan_devices: marking existing devices [sanei_usb] libusb_scan_devices: Looking for libusb-1.0 devices [sanei_usb] libusb_scan_devices: device 0x046d/0xc077, interface 0 doesn't look like a scanner (0/3) [sanei_usb] libusb_scan_devices: device 0x046d/0xc077 at 001:001: no suitable interfaces [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x04b8/0x1135) interface 0 at libusb:001:002 [sanei_usb] store_device: not storing device libusb:001:002 [sanei_usb] libusb_scan_devices: found libusb-1.0 device (0x147e/0x1002) interface 0 at libusb:001:003 [sanei_usb] store_device: not storing device libusb:001:003 [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 0 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317, interface 1 doesn't look like a scanner (239/14) [sanei_usb] libusb_scan_devices: device 0x05c8/0x0317 at 001:004: no suitable interfaces [sanei_usb] sanei_usb_scan_devices: device 00 is libusb:001:002 [sanei_usb] sanei_usb_scan_devices: device 01 is libusb:001:003 [sanei_usb] sanei_usb_scan_devices: found 2 devices [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a27 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a3c [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a33 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a93 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a24 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a25 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a3a [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2f [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x1a35 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a23 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2a [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2b [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x1a31 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2c [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2d [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a2e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a94 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a18 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a18 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a5e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a41 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a16 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a13 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4f [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a65 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a66 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a82 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a84 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a4d [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a40 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a68 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a61 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0aa1 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a45 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0701 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0701 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0801 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x0b01 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x3905 [sanei_usb] sanei_usb_find_devices: vendor=0x03f0, product=0x3805 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x026a [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x4004 [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x400d [sanei_usb] sanei_usb_find_devices: vendor=0x0686, product=0x400e [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a15 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0a16 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x1029 [sanei_usb] sanei_usb_find_devices: vendor=0x04c5, product=0x10ef [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6001 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6002 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6003 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6004 [sanei_usb] sanei_usb_find_devices: vendor=0x040a, product=0x6005 [sanei_usb] sanei_usb_find_devices: vendor=0x0638, product=0x0268 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0424 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0491 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0479 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048f [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0420 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0421 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047a [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0422 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0390 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047b [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0423 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0493 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0497 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0498 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0499 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0477 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049d [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0448 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0490 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0449 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0476 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x044c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048d [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x04a7 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0475 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x048e [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0446 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0495 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x047c [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0447 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0492 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x0478 [sanei_usb] sanei_usb_find_devices: vendor=0x04a7, product=0x049a [sanei_usb] sanei_usb_find_devices: vendor=0x0482, product=0x0335 [dll] load: searching backend `apple' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/apple1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/apple1.dll' [dll] init: initializing backend `apple' [dll] init: backend `apple' is version 1.0.0 [dll] load: searching backend `agfafocus' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/agfocus1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/agfocus1.dll' [dll] init: initializing backend `agfafocus' [dll] init: backend `agfafocus' is version 1.0.0 [dll] load: searching backend `abaton' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/abaton1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/abaton1.dll' [dll] init: initializing backend `abaton' [dll] init: backend `abaton' is version 1.0.0 [dll] load: searching backend `net' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/net1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/net1.dll' [dll] init: initializing backend `net' [dll] init: backend `net' is version 1.0.28 [dll] load: searching backend `hpaio' in `/@unixroot/usr/lib/sane' [dll] load: trying to load `/@unixroot/usr/lib/sane/hpaio1.dll' [dll] load: dlopen()ing `/@unixroot/usr/lib/sane/hpaio1.dll' [dll] init: initializing backend `hpaio' [dll] init: backend `hpaio' is version 1.0.0 [dll] sane_get_devices: found 0 devices scanimage: no SANE devices found [dll] sane_exit: exiting [dll] sane_exit: calling backend `xerox_mfp's exit function [dll] sane_exit: calling backend `umax1220u's exit function [dll] sane_exit: calling backend `umax's exit function [dll] sane_exit: calling backend `u12's exit function [dll] sane_exit: calling backend `teco3's exit function [dll] sane_exit: calling backend `teco2's exit function [dll] sane_exit: calling backend `teco1's exit function [dll] sane_exit: calling backend `tamarack's exit function [dll] sane_exit: calling backend `sp15c's exit function [dll] sane_exit: calling backend `snapscan's exit function [dll] sane_exit: calling backend `sm3840's exit function [dll] sane_exit: calling backend `sm3600's exit function [dll] sane_exit: calling backend `sharp's exit function [dll] sane_exit: calling backend `sceptre's exit function [dll] sane_exit: calling backend `s9036's exit function [dll] sane_exit: calling backend `rts8891's exit function [dll] sane_exit: calling backend `ricoh2's exit function [sanei_usb] sanei_usb_exit: freeing resources [sanei_usb] sanei_usb_exit: freeing device 00 [sanei_usb] sanei_usb_exit: freeing device 01 libusb: warning [libusb_exit] some libusb_devices were leaked [dll] sane_exit: calling backend `ricoh's exit function [dll] sane_exit: calling backend `plustek's exit function [dll] sane_exit: calling backend `pixma's exit function [dll] sane_exit: calling backend `pie's exit function [dll] sane_exit: calling backend `niash's exit function [dll] sane_exit: calling backend `nec's exit function [dll] sane_exit: calling backend `mustek_usb's exit function [dll] sane_exit: calling backend `microtek2's exit function [dll] sane_exit: calling backend `microtek's exit function [dll] sane_exit: calling backend `matsushita's exit function [dll] sane_exit: calling backend `magicolor's exit function [dll] sane_exit: calling backend `ma1509's exit function [dll] sane_exit: calling backend `lexmark's exit function [sanei_usb] sanei_usb_exit: freeing resources [sanei_usb] sanei_usb_exit: freeing device 00 [sanei_usb] sanei_usb_exit: freeing device 01 libusb: warning [libusb_exit] some libusb_devices were leaked [dll] sane_exit: calling backend `leo's exit function [dll] sane_exit: calling backend `kvs20xx's exit function [dll] sane_exit: calling backend `kvs1025's exit function [dll] sane_exit: calling backend `kodakaio's exit function [dll] sane_exit: calling backend `kodak's exit function [dll] sane_exit: calling backend `ibm's exit function [dll] sane_exit: calling backend `hs2p's exit function [dll] sane_exit: calling backend `hpljm1005's exit function [dll] sane_exit: calling backend `hp5590's exit function [dll] sane_exit: calling backend `hp5400's exit function [dll] sane_exit: calling backend `hp4200's exit function [dll] sane_exit: calling backend `hp3500's exit function [dll] sane_exit: calling backend `hp3900's exit function [dll] sane_exit: calling backend `hp's exit function [dll] sane_exit: calling backend `gt68xx's exit function [sanei_usb] sanei_usb_exit: freeing resources [sanei_usb] sanei_usb_exit: freeing device 00 [sanei_usb] sanei_usb_exit: freeing device 01 libusb: warning [libusb_exit] some libusb_devices were leaked [dll] sane_exit: calling backend `genesys's exit function [sanei_usb] sanei_usb_exit: freeing resources [sanei_usb] sanei_usb_exit: freeing device 00 [sanei_usb] sanei_usb_exit: freeing device 01 libusb: warning [libusb_exit] some libusb_devices were leaked [dll] sane_exit: calling backend `fujitsu's exit function [dll] sane_exit: calling backend `epsonds's exit function [epsonds] ** sane_epsonds_exit [dll] sane_exit: calling backend `epson2's exit function [dll] sane_exit: calling backend `epjitsu's exit function [dll] sane_exit: calling backend `dmc's exit function [dll] sane_exit: calling backend `coolscan's exit function [dll] sane_exit: calling backend `cardscan's exit function [dll] sane_exit: calling backend `canon_dr's exit function [dll] sane_exit: calling backend `canon630u's exit function [dll] sane_exit: calling backend `canon's exit function [dll] sane_exit: calling backend `bh's exit function [dll] sane_exit: calling backend `artec's exit function [dll] sane_exit: calling backend `avision's exit function [dll] sane_exit: calling backend `apple's exit function [dll] sane_exit: calling backend `agfafocus's exit function [dll] sane_exit: calling backend `abaton's exit function [dll] sane_exit: calling backend `net's exit function [dll] sane_exit: calling backend `hpaio's exit function [dll] sane_exit: finished