Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - christech

Pages: [1] 2 3 ... 11
1
Applications / Re: Lotus SmartSuite 4 on WinOS/2
« on: August 02, 2024, 07:19:05 pm »
Why not run the OS/2 version from Archive.org?

2
Applications / Re: VLC Crashes While Streaming
« on: June 17, 2024, 05:15:14 pm »
So I cleaned up my system, re-applied thermal paste to the CPU and I have the same issue, even after swapping out my GPU. I previously had a FirePro 2270.

Current setup:
Xeon 2.79 GHZ
ATI FirePro W5000 - DVI connection

Still can't play YouTube video that Martin linked, the Tears of Steel video plays fine for 30s and then start getting glitchy. I have a Samsung SSD for the boot drive.

3
Applications / Re: VLC Crashes While Streaming
« on: June 13, 2024, 05:20:00 pm »
Local videos appear to work just fine. I have a 1Gb connection, so I think I can rule out a slow connection. For $hit$ and giggles I pulled the heatsink off the CPU, and surprise surprise the thermal paste had dried up.. going to fix that and see if it helps. This system has had other random issues. I checked the RAM, and it passes all tests. Will get back here in a few days after some more testing. I can play the 'Tears of Steel' video but it starts getting choppy after 30 seconds every time. The YouTube video does not play at all.

4
Applications / VLC Crashes While Streaming
« on: June 12, 2024, 06:32:26 pm »
Hey all,

I am trying to use VLC 3.0.19 to stream some IPTV. It loads the playlist and starts streaming but crashes and locks the system after a few seconds, has anyone else had this issue?

5
Hardware / Re: Modern Motherboards - Whats working
« on: May 28, 2024, 05:06:30 pm »
ArcaOS works pretty well with my Asus Crosshair V. Has PS/2 but it is now over 10 years old and is AMD.

6
Applications / Re: 3270
« on: May 10, 2024, 05:06:27 pm »
The author of ZOC gave me a free reg code for asking. I use it when I connect to serial devices on Arca.

7
Hardware / Re: Wireless Mouse Issue
« on: March 31, 2024, 09:43:42 pm »
Well, that solves it. I plugged the Logitech receiver directly into the computer, and it works. When I tried that with the Evoluent receiver, it did not work. My KVM is a Monoprice 4x1 Blackbird.

8
Hardware / Re: Wireless Mouse Issue
« on: March 30, 2024, 08:58:07 pm »
Interestingly enough, I plugged my old Logitech mouse (that worked on ArcaOS ) and it does the same thing. I ran lsusb with the Logitech dongle installed:

Bus 000 Device 007: ID 046d:c52b Logitech, Inc. Unifying Receiver

It doesn't work, maybe it's my KVM switch? I will open a ticket.

9
Applications / Unlock DLL
« on: March 30, 2024, 01:51:13 am »
Hey all, trying to get Openchat working.. I downloaded the replacement DLL, but I can't replace it. Says it's in use. How to replace it?

Thanks.

10
Hardware / Re: Wireless Mouse Issue
« on: March 29, 2024, 11:36:24 pm »
Yes, regular mouse is working. It's an Evoluent ergonomic mouse. Comes with a USB dongle. I have it on a KVM that I share with other machines. I'll get more info on it.

11
Hardware / Wireless Mouse Issue
« on: March 29, 2024, 08:13:14 pm »
I finally got ArcaOS installed on a GPT-partitioned disk. My wireless mouse will not work. Works on macOS, Linux, RISC OS with no special drivers. Anyone run into this issue before?

12
Marketplace / Re: Is anyone presently offloading any OS/2 software?
« on: March 28, 2024, 10:45:19 pm »
I've been building my collection slowly. Have gotten HyperAccess v6 and v7, Describe, DB2. Warp v3 (I wonder what I ever did with my v3 that I got brand new in the 90s!) and v4. Internet Archive has a bunch of ISOs. Also books.. lots of books.

13
Applications / Re: PMMail
« on: February 24, 2024, 05:06:47 am »
I found it. Thanks.

14
Applications / Re: PMMail
« on: February 24, 2024, 05:03:06 am »
There’s no link on the ArcaNoae page that I can find.

15
Applications / Re: PMMail
« on: February 23, 2024, 11:31:45 pm »
http://www.os2voice.org/ seems to load fine now, (Firefox 45.9.0).

I'm specifically getting an Error 500 when trying to access the site.

Pages: [1] 2 3 ... 11