Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Alexander

Pages: [1]
1
Multimedia / Re: Updated Uniaud32 build
« on: February 03, 2021, 12:19:36 pm »
Quote from: Paul Smedley on February 03, 2021, 03:25:42 am
Based on IRC - you had working multistream with an old uniaud16.sys and uniaud32.sys

Are you able build date/version numbers of the 'working' uniaud16.sys and uniaud32.sys so I can try and ascertain the relevant SVN revision and see what changes have been made since.
29.12.04   2:20      61554    uniaud16.sys
29.12.04  19:52     479694  uniaud32.sys

uniaud16:
Signature:       @#"OS/2 Universal Audio Driver Version":1.01.002#@
Vendor:          "OS/2 Universal Audio Driver Ve
Revision:        1.1
File Version:    1.1
Description:

On boot it says:
OS/2 Universal Audio MMPM/2 Driver v1.1.2
Copyright 2000-2002 InnoTek Systemberatung GmbH
Copyright 2002 IBM Corporation
Maintained by http://os2.kiev.ua/en/uniaud.php


uniaud32 have not version strings
on boot says:
OS/2 Universal Audio Core Driver v1.1.0
Copyright 2000-2002 InnoTek Systemberatung GmbH
Copyright 2000-2002 The ALSA Project

It can be downloaded from
https://filebin.net/06736c66fezgbduw/uniaud_latest.zip?t=ouzf69qm




2
Multimedia / Re: Updated Uniaud32 build
« on: February 02, 2021, 03:33:03 pm »
Hi!

With uniaud32-linux-5.10.11-20210131.zip results the same, sound working , but no multistream

3
Multimedia / Re: Updated Uniaud32 build
« on: January 28, 2021, 09:28:20 am »
This old uniaud version 1.1
uniaud16 says 1.1.2
uniaud32 - 1.1.0
29.12.04   2:20      61554             0  uniaud16.sys
29.12.04  19:52     479694            54  uniaud32.sys
ftp://icn@79.135.223.10/os2soft/uniaud/uniaud_latest.zi6

4
Multimedia / Re: Updated Uniaud32 build
« on: January 28, 2021, 09:22:46 am »
Quote from: Paul Smedley on January 28, 2021, 08:31:26 am
Quote from: Alexander on January 28, 2021, 08:18:44 am
Can you repeat the above test with https://smedley.id.au/tmp/uniaud32-20210128-Alexander.zip ? It reverts a change which allowed HDA hardware to produce sound, and which (I think) might be the cause of the issues with stream interruptions.
No, the same result

5
Multimedia / Re: Updated Uniaud32 build
« on: January 28, 2021, 08:18:44 am »
Quote from: Paul Smedley on January 25, 2021, 05:59:45 am
Quote from: Alexander on January 25, 2021, 02:27:47 am
I have sblive CT4830 4-channels card. It supports multistream and it really works with old uniaud.
Check mixer controls with pmunimix.
I doubt that mixer controls can lead to msi error

Ok, now i found, whats wrong, its very old uniaud16
I take this...
::@@Universal Audio MMPM/2 Driver for OS/2
Vendor:          Netlabs
Revision:        1.9.7
Date/Time:       25 Jun 2017 17:11:40
Build Machine:   DAZAR1
File Version:    1.9.7
Description:     Universal Audio MMPM/2 Driver for OS/2
...and with it sound works ok with uniaud32-linux-5.10.10-20210126.zip

But mutistream is not working
I attach several logs:
uniaud0 - after boot, no wps sounds
uniaud1 - warpvision playing
uniaud2 - now i started pm123 and in says mci err 5613: insufficient buffer space specified
uniaud3 - warpvision closed and pm123 playing ok

Ps With old uniaud warpvision and pm123 playing simultaneously without any errors

6
Multimedia / Re: Updated Uniaud32 build
« on: January 25, 2021, 02:27:47 am »
Hi!
First, thank you very much for your great work on uniaud!

I have sblive CT4830 4-channels card. It supports multistream and it really works with old uniaud.

I tried uniaud32-linux-5.10.10-20210124 , no traps , but no sound at all, pm123 says mci error 5134: no device driver found

7
Hardware / Re: DOS session does not work. Motherboard Asrock B85
« on: November 27, 2020, 02:20:09 am »
Quote from: Igor on November 19, 2020, 10:31:02 pm
After starting a full-screen DOS session, a screen with "C:\" appears as in the picture (see attachment).
After pressing any key, the screen closes and the popuplog.os2 is formed.

What can be done?

Try to disable dos=umb

set
DOS=HIGH,NOUMB
in config.sys

and check in vdm settings of each dos session shotcut , incl win/os2 sessions

Ps dos+emm386 runs on this motherboard with
device=c:\dos\emm386.exe  /nomovexbda noems ram

8
Internet / Re: TOR and FF
« on: August 14, 2019, 03:09:08 am »
Modern FF work with tor socks only with help of os/2 tcp stack ability to route some traffic into socks proxy

d:\mptn\etc\socks.cfg :
sockd @=127.0.0.1 8.8.8.8 255.255.255.255 *=root *=test
sockd @=127.0.0.1 0.0.0.0 0.0.0.0 *=root *=test

d:\mptn\etc\socks.env :
SOCKS_FLAG ON
SOCKS_DOMAIN mydomaiN
SOCKS_NS 8.8.8.8
SOCKS_SERVER
SOCKS_USER
SOCKS_PASSWORD

d:\mptn\etc\resolv2 :
domain
nameserver 127.0.0.1

torrc :
DNSPort 53
DNSListenAddress 127.0.0.1
PidFile /tor/etc/tor/tor.pid
ClientOnly 1
SocksPort 1080 # Default: Bind to localhost:9050 for local connections.




9
Internet / Re: Firefox - 45.9.0 for OS/2 GA1.1...anyone...anyone???
« on: April 25, 2018, 10:26:36 am »
Tried with Dave build - flash plugin doesnt work , just black square

10
Internet / Re: Firefox - 45.9.0 for OS/2 GA1.1...anyone...anyone???
« on: April 25, 2018, 10:18:23 am »
Sorry, where the plugin-container.exe ? I cant see this in firefox-45.9.0-3.oc00.pentium4.7z nor in firefox-45.9.0-3.t1.i686.7z

Pages: [1]