Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Remy

Pages: [1] 2
1
More and more web site aren't working due to old firefox version.
I added an entry under about:config and now, I'm again able to see more sites, some using new functions aren't working like before but those just using access restriction due to firefox version are ok

Here is the added string:

2
Utilities / CURL 7.75.0
« on: April 24, 2021, 10:46:43 am »
Tried to install curl 7.75.0 using ANPM, It requires to install clamav 0.99 (crashing at db load - very high storage use) and other tools which seems having no relation with curl.
Do you have the same issue ?

3
Applications / CLAMAVGUI-GUI
« on: February 16, 2021, 09:34:28 pm »
Hi!
For those using my ClamAV-GUI (rexx), since a few days, some of you could see error while updating database.
If you see this problem, go under ClamAV-GUI settings and uncheck the -no-dns option. That's all folks !
You can update freshclam config file with using " DatabaseMirror database.clamav.net " only.

Regards
Rémy


4
Internet / Firefox trap.
« on: February 06, 2021, 11:57:00 am »
Hi !

I just had following trap into Firefox 45.9.0-SUa2 (2019-05-20)
Any idea about what happens ?

 Filename: W:\PROGRAMS\FIREFOX\XUL.DLL (06/02/2019 18:00:05 39,105,957)
 Address:  005B:AB8A86F2 (0001:029286F2)
 Cause:    Attempted to read from 00000010
           (not a valid address)

______________________________________________________________________

 Failing Instruction
______________________________________________________________________

 AB8A86E2  MOV  [ESP], EDX       (891424)
 AB8A86E5  MOV  [ESP+0x1c], EDX  (895424 1c)
 AB8A86E9  CALL 0xab8a6730       (e8 42e0ffff)
 AB8A86EE  MOV  EDX, [ESP+0x1c]  (8b5424 1c)
 AB8A86F2 >MOV  EAX, [EAX+0x10]  (8b40 10)
 AB8A86F5  MOV  EAX, [EAX+0x20]  (8b40 20)
 AB8A86F8  MOV  EDI, [EAX+0x10]  (8b78 10)
 AB8A86FB  TEST EDI, EDI         (85ff)

______________________________________________________________________

 Registers
______________________________________________________________________

 EAX : 00000000   EBX  : 0019D8EC   ECX : 3330622C   EDX  : 33306140
 ESI : 34E67420   EDI  : 34E67538
 ESP : 0019D850   EBP  : 0019D87C   EIP : AB8A86F2   EFLG : 00210206
 CS  : 005B       CSLIM: FFFFFFFF   SS  : 0053       SSLIM: FFFFFFFF

 EAX : not a valid address
 EBX : read/write memory on this thread's stack
 ECX : read/write memory allocated by LIBCN0
 EDX : read/write memory allocated by LIBCN0
 ESI : read/write memory allocated by LIBCN0
 EDI : read/write memory allocated by LIBCN0

______________________________________________________________________

 Stack Info for Thread 01
______________________________________________________________________

   Size       Base        ESP         Max         Top
 00100000   001A0000 -> 0019D850 -> 0015E000 -> 000A0000

______________________________________________________________________

 Call Stack
______________________________________________________________________

   EBP     Address    Module     Obj:Offset    Nearest Public Symbol
 --------  ---------  --------  -------------  -----------------------
 Trap  ->  AB8A86F2   XUL       0001:029286F2  between nsDocShell::GetOriginAttributes + 52 and nsDocShell::CreatePrincipalFromReferrer - 16E  (both in Unified_cpp_docshell_base0.cpp)

 0019D87C  201424E0   *Unknown*

 33306140  AB8BA0DC   XUL       0001:0293A0DC  between nsDocShell::{vtable} + 534 and nsQueryObject::{vtable} - 6E0  (both in Unified_cpp_docshell_base0.cpp)

 AB8B9BB0  AB8A1870   XUL       0001:02921870  nsDocShell::AddRef  (in Unified_cpp_docshell_base0.cpp)

 Lost Stack chain - new EBP below previous

______________________________________________________________________

Regards
Rémy

5
Web applications / QT5 simplebrowser
« on: November 09, 2020, 09:26:54 pm »
After download and add of all missing dlls, trying to start "sh eun.sh" I have a "BUS ERROR" error message into the log file.
Any idea about this error ?
Thanks
Rémy

6
Applications / Firefox 45.9.0 and libtheora 1.1.1-1 not compatible
« on: September 16, 2020, 12:08:41 pm »
I just installed ffmpeg from netlabs-exp. During the installation, it installs dlls and one of them is the package libtheora 1.1.1-1 from netlabs-rep.
After installation and reboot, I start firefox but as soon I open a web link with available video/audio media, it closes.
Under popuplog.os2, i have:

AVCODE57->THEORAE1._th_info_init
127

I then renamed new theora*.dll and put back my older saved theora* dlls.
After reboot, firefox stays up and no more issue.

Either libtheora has a problem or firefox may need be upgraded to work with libtheora 1.1.1-1 build
 
Regards
Remy

7
Multimedia / Use of webcam
« on: May 20, 2020, 02:05:55 am »
Hi,

I would like use my webcam under ArcaOS.
USBEHCD.SYS is installed and my webcam seen as Logitech, Inc.  Webcam C270
Now, how to display the webcam ? (video + sound)

Thanks
Rémy

8
Applications / ClamAV-GUI.
« on: May 10, 2020, 09:24:59 pm »
Working on next AVxCAT v2, I used VLC for tests and found some interaction with my ClamAV-GUI  build making some rxu functions not responding until VLC is down !

ClamAV-GUI update was since this finding, my highest priority.
To prevent this, I switched to use as default dll, rxutilex (rxu left as second option - available dll is automatically selected). With rxutilex, it works better and free of VLC interaction (rux.dll)

I suggest to migrate to ClamAV-GUI 3.6.3 and install rxutilex...;dll for those not having it (base installed under ArcaOS)
This build has many changes.... 

Best regards
Rémy   


PS: If you install  the widget (be improvement), dont forget to add the option to detect firewall is up or not (tested with IJFW)
e.g. paramters for ClamAV WG (daemon)
       clamavgui_path  beepon  clamav_virdb_path  maxday_noDBupdt  1   << 1 to check firewall up/down 

Some screen capture about widget and its dialog panel when [enter] on the widget icon.
And a second view about the older clamavm (scheduler for clamav-gui) after code change and already at alpha stage.
 

9
Applications / Shared storage
« on: April 25, 2020, 09:37:40 pm »
Hi !

Any idea why an older ffmpeg compiled with gcc 4.4.4 doesn't left any shared storage holes at close time while ffmpeg compiled with gcc 5.5.0 left about 20MB (all dlls size) of free unusable holes in the shared memory at close time ?

(FFmpeg or ffprobe)

Updt: problem occures as well with ffplay but in all cases only with dll's loaded above 512MB line  (when below, no issue)


Regards
Rémy

10
Applications / CPUTEMP
« on: March 10, 2020, 12:46:16 pm »
Hi I downloaded lates SL "SystemLoad SL-wpi-20200302.zip"
In the package, CPUTEMP.WPI is provided but trying to install it, I've got a warning icon due already installed CPU temperature API at 2.0.3 while the one in the package is 2.0.2 !

Is there a raison about this regression ?

Regards

11
Applications / ApacheOpenOffice 417 Quick Start
« on: February 12, 2020, 11:41:13 am »
I tried to put AOO quick start into start up folder or ArcaOS start up folder (ffturbo and lunchpad already into ArcaOs start up folder).
In both cases, I have following message at boot time. any idea ?

thanks
Rémy

12
Programming / Trim command
« on: January 25, 2020, 10:22:35 am »
SSD may working slower after some time according how the SSD is used.

Do you know if ArcaOs or someone else  could implement a TRIM command under OS/2 ?
I found following link telling about TRIM
http://www.t13.org/Documents/MinutesDefault.aspx?keyword=trim

But I do not having the needed skills....

Cheers 

13
Applications / AVxCAT 1.5.1.4
« on: August 16, 2019, 10:41:10 am »
New screenshot to update older one :D


14
Internet / TOR and FF
« on: August 12, 2019, 07:22:53 pm »
I'm trying to use TOR.
I installed it and it start well (ready) (with help of Vidalia)
I than tried to configure FF as it should using proxy, the given port used by TOR etc...
I tried 9050 - 9051 - 9150 - 9151 (DNS checked, no proxy for 127.0.0.1 etc...
I never could get any web page under FF (38 or 45) using TOR !
How do you do to be able to use FF with TOR ?

Thanks

15
Applications / ClamAVGUI (rexx)
« on: August 02, 2019, 08:32:34 pm »
Hi,

I put on my site for a few days prior annoncement:
http://remydodin.levillage.org/doc/realisations/downloads/ClamAVGUI-3_6_2_0.wpi

It has several updates, clamav icon is centered and size is screen resolution adapted.
Quick Scan updated to be faster
Widget corrected to well detect outofdate virdatabase
etc...
(To use the run of the desktop widget, rxu.dll needed under os2\dll or clamavgui program path - it enables a messagebox allowing to start clamavgui or non with some icon color description )

A few tests feedback before end of next week would be nice. Thanks
Rémy 

Pages: [1] 2