Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Doug Bissett

Pages: 1 [2] 3 4 ... 98
16
Applications / Re: theseus 4.001 trap in usbmon
« on: May 25, 2021, 08:17:58 am »
Dave, maybe the object is in the XWorkplace Startup Folder instead of the legacy WPS startup folder ? For me, it is in the legacy WPS startup folder.
No, it's always recreated in <WP_STARTUP>. That one is always processed before any XFldStartup object. Maybe it's recreated early on startup via PM_InstallObject, indirectly added by USBPRT.SYS. Quite unlikely and I suppose its notification window during object creation can't be disabled.

Actually, it does get recreated, if you delete the object. I don't have a USB printer, so I just MOVE it somewhere outside of a startup folder. It doesn't get replaced (it already exists), and it doesn't start (nothing to start it), so it can't take up resources, or cause problems. Not a useful approach if you do have a USB printer, but it makes sense when you don't have a USB printer.

17
Applications / Re: Desktop Enhancement for WPS
« on: May 15, 2021, 03:08:16 am »
Actually, a couple of years ago, I bought some WiFi capable "smart plugs", from Amazon. After a couple of days, i had a problem, where something, repeatably, crashed, while I was in Firefox. After I investigated, it was a program. called Hello.exe. Looking further, that is, apparently, one of those ransomeware things.  The, so called, smart plugs opened a path for the virus to be introduced into my computer. OS/2 just spit it out, with no damage. It did infect my router, but a reset to factory fixed that. Amazon did take them back, but nobody did anything else about it.

The "problem", today, is that perfectly valid software is classified as a "problem", simply because microsoft did not make a dollar, by "inspecting" the files.

18
Applications / Re: Desktop Enhancement for WPS
« on: May 14, 2021, 10:55:12 pm »
If microsoft didn't write it, or if the files were not submitted to microsoft so they can charge to "inspect" them, they will probably be classified as a virus, by the microsoft, so called, anti virus checkers. They are getting a LOT more aggressive at doing things like that, even with well known, third party, windows software (Avast, AVG, CCleaner, and probably more). Even worse, is that microsoft software will prevent such software from being installed, and will often just kill it when the user attempts to start it, if it is already installed. At least we don't need to worry about that.

Somebody, with very deep pockets, needs to haul them off to court.

19
Setup & Installation / Re: Booting with NVMe
« on: April 15, 2021, 06:28:18 am »
Quote
I'm booting just fine from a Lenovo ThinkCentre M900 with a StarTech PCIe-4x NVMe card

Does that card attach to the BIOS? Mine doesn't.

I have a StarTech PCI SATA /RAID card, that I can boot from. It is in an old Asus P4VP that I use as a NAS box. It does add itself to the BIOS, so I should be able to boot from it (but I never tried).

Quote
As far as being a waste, new machines only have this type of drive, so we need booting support.

That is what I meant by "or it is your only choice".

Many people think that a fast boot is a good thing, but they only boot once in a while. Other things are used all of the time, and fast access helps out. Meanwhile, the boot code is just taking up space that might be better used for other things (it depends on the size of the drive). I would think that some (but not all) of the UNIX support would be good to have on a NVMe drive. Unfortunately, there is no obvious way to separate the often used parts, from the never used parts. I have been using the RAMDISK for temporary files. My RAMDISK is big enough for most things, and it doesn't matter if it survives a reboot (in fact, it is a good thing that it gets cleared at every boot). Now, I can use the NVMe drive for temporary files that are too big for the RAMDISK (large ZIP files, for example). It is, in fact, a little faster than the RAMDISK (according to the DFSEE speed test). However, it seems that the NVMe drive needs TRIM sometimes, and it is probably not good to keep reusing the same area. I am not too sure how that will work out.

Time will tell the tale...

20
Setup & Installation / Re: Booting with NVMe
« on: April 15, 2021, 03:23:13 am »
I got a Vantec PCIe adapter, and installed a 250 GB Samsung 980 PRO (PCIe 4.0 NVMe M,2). It works well, after the driver loads, but I cannot boot from it. The problem is that it is mounted on a plug in card, that the BIOS doesn't know about, so it won't boot from it (because it doesn't know it is there). Air Boot also cannot "see" it, because BIOS doesn't know about it. Most (if not all) machines cannot boot from a plug in card, if the BIOS doesn't know about it. This is true for USB too.

If you have a machine, that knows about the adapter, it should boot from it.

Then again, it really doesn't make much sense to waste one of those things for boot code, unless you boot 14 times a day, or it is your only choice. I am still thinking about how to use it effectively. At least it is non volatile, so it remembers what was put on it, unlike what the RAMDISK does.

21
Storage / Re: eSata
« on: March 27, 2021, 04:07:35 am »
eSATA has never been completely supported by any OS. that I know about. Even windows will usually refuse to eject it, until the system is shut down. For those who understand it, eSATA is a far better technology than USB, but lack of proper support makes it difficult to use.

NVME is a storage technology, related to SATA  (or eSATA, which is really just SATA with a different connector), or IDE. M2 and NVME are just other interfaces to storage technology. Which one will win the race, is yet to be seen.

In years past, there was the "winprinter' controversy. Today, "winprinter" is all that is available, because people didn't understand the difference (other than price). Pay double for a computer powerful enough to do the job, and save a little on the printer. This is really no different.

Manufacturers are going to choose the cheapest alternative, and they usually don't care if that alternative even works properly (and many of the new technologies don't work all that well). The only thing that will stop that nonsense is if users refuse to buy inferior technology. Most users have no idea what technology their computers use, so it isn't going to happen.

Quote
About eSATA, as a external device port, my opinion is that is loosing on the market (or maybe already lost).

No, it is not, yet, lost. You just need to watch for the option when you buy something that can use it. You do not need a specific eSATA port, it will connect to normal SATA ports, if you have an adapter (just a cable), or even just a cable with the appropriate ends on it. The killer, as mentioned above, is lack of support for mount/dismount, and that is not unique to OS/2 (and the cost, of course).

USB 3 is definitely going to take a chunk out of the market, because speed is no longer a serious difference. If they ever get USB quality under control, it may be the end of eSATA. I don't see that happening any time soon, but if the market goes away, so will the devices.

Quote
But as part of the OS/2 community, eSATA may be working better than USB 3, today.

Not from what I see. I have two eSATA devices. One has a USB 2 connector, which is definitely slower than eSATA. The other has USB 3. Running the exact same job runs so close to the same speed, that I can't tell which is faster. USB is somewhat easier to use, because of the mount/dismount requirements for eSATA. Which is better depends on exactly what you are doing with the device.

Having said all of that, yes USB does have some problems, that are being addressed. The biggest problem is that USB is often very poor quality devices, and that makes it very difficult to make every one of them work well, with any OS.

The race is still on. It is up to the consumer to determine which technology wins. Meanwhile, we need more drivers to make some of the new things work with OS/2. I know that NVME is almost ready. Nobody is working on making eSATA mount/dismount work, although there is a half way solution, if you want to mess around with it (not worth the effort, from what I see).

22
Storage / Re: eSata
« on: March 26, 2021, 01:56:21 am »
Quote
We are discussing an external drive case that used to have eSATA and USB3 sockets but which now only has USB3 socket - so there is no longer an option to use it as eSATA drive, it is now USB only.

I assume you mean an updated version of a drive enclosure, not one that magically removed it's existing eSATA connector  ???. You can still get eSATA enclosures (also with USB 3), but you need to watch what you order. Most vendors list the version with only USB first, because the eSATA costs more, and not many people even know what eSATA is.

eSATA has definitely NOT gone away, although USB 3 is giving it a good run for the money. If they ever get the quality of USB devices under control (apparently not even considered, in most cases), USB may end up replacing eSATA. Currently, I see no evidence that the companies who care about quality, are abandoning eSATA.

23
Storage / Re: eSata
« on: March 25, 2021, 08:05:31 pm »
Quote
1] eSATA works as per SATA ie must power off system to eject drive.

Not true. SATA and eSATA, are both hot plug technologies. Power off is not required to physically attach, or detach, either one. In OS/2 you MUST close out the file systems before detaching them (shut down the system). You can attach them, at any time, but in OS/2 you must reboot to get them recognized.

Note that some systems have a physical connector for eSATA, and the BIOS should, automatically, recognize that port as being for eSATA. Other systems may use an adapter (or just a cable) that plugs into a normal SATA connector on the motherboard. In that case, the BIOS should have a setting to tell it that the port is used with eSATA (but that doesn't seem to exist in all cases). In fact, that is only used with operating systems that recognize that eSATA can be plugged in, at any time, so it is irrelevant to OS/2.

I am not familiar with eSATA(p), so I don't know how the connector gets power for the external device. The devices, that I have, all use their own power source.

Quote
2] eSATA support was dropped at some point, I do not know when.

Not true. All that was dropped is the built in eSATA connectors. You can still use eSATA devices connected to normal SATA ports (see above).

24
Storage / Re: FAT32 - Netlabs or AN?
« on: March 17, 2021, 02:25:08 am »
Quote
How could FAT12/16 support interfere with IBM's FAT support, interestingly? Is not that Lewis Rosenthal who said you that nonsense?

No, I didn't hear it from Lewis. In fact I probably told him about it. This was early in the life of that driver, so things may have been fixed.

Quote
Regarding the exFAT, it is very useful if you use digital cameras.

Perhaps, if you have an older camera. I haven't seen exFAT in anything that I ever bought, and looking at the information on the net, it seems that most companies have decided that it just isn't worth paying Microsoft for the rights to use it. True, it is available, but nobody trusts Microsoft.

Quote
What's the rubbish is that? Why it's not legal? Because AN fears Microsoft? There are several exFAT drivers for Linux. Nobody proved so far that they are illegal, the same for our driver.

Quote
Regarding software patents and other rubbish. exFAT and FAT12/16 support is not more patented than FAT32. So, if M$ didn't sued us for using FAT32, then we could sleep in peace with FAT and exFAT as well.

It is not legal to use FAT32, without paying Microsoft for the right to use it (even if it is only a dollar). They own the patent (as they do with exFAT). Just because they haven't, yet, gone after somebody for using it without the legal paperwork being done, doesn't mean they won't, in the future. IBM trusted Microsoft, and look what happened to OS/2. AN quite rightly fears Microsoft, and they fear IBM too. Their contract with IBM probably prohibits using things like exFAT. If either company decided that AN broke any contracts, they could put AN out of business with the stroke of a pen. AN cannot take the chance. They are a US company, and must follow US law. Obviously, you don't care much for laws, but they are necessary, even if they are stupid. AN do supply the FAT32 driver, which is old enough that they are pretty safe. I do know that they spent a lot of money checking out the legality of many parts of OS/2. That is one of the reasons why some of the GENMAC drivers are not included with ArcaOS. They couldn't get permission to include them.

The bottom line is that you can do what you want. Arca Noae cannot take the chance. If people want to use your driver, that is fine too. Just don't put AN at risk because you think you are above the law.

Quote
The other reason was, that I can finally format a dump partition up to 4 GB with FAT16 (by selecting a 64k cluster size) which allows to use the original OS2DUMP (that only dumps to FAT16 partitions) without the need to install DUMPFS.

Well, DUMPFS is actually the FAT 16 driver, with a patch. You should also realize that ArcaOS 6.0 has new dump support. It will dump to FAT32 (or FAT16 if 2 GB is enough). It doesn't make much sense to make the dump partition more than 4 GB, because that is the largest size that a dump can be. Don't try to use the dump partition for anything else. The dump program doesn't care if you already have something in the drive.

25
Hardware / Re: Quatech SSP-100 Serial Port PCMCIA in ArcaOS
« on: March 16, 2021, 05:55:11 pm »
I have been sort of following this, but it is not entirely clear what you are really trying to do.

I have two PCMCIA modems, that do work fine (well, I no longer have a telephone line to connect them to, but ZOC communicates with them), when I take the time to set it up properly (they are just serial ports, with a modem attached). PCMCIA is very sensitive to the order of the lines in CONFIG.SYS, and you probably need the /VW switch on the ACPI.PSD line (if you use ACPI.PSD, which you probably should). You would need the proper PCMCIA driver (sounds like you might have that, but see below), and the COM driver (use PSCOM.SYS). All that does (is supposed to do) is create a normal COM port. Check that with the MODE command. Then, if you need software (if any) for the attached device, you need the OS/2 version (a windows driver isn't going to work).

That may be a "pretend" PCMCIA adapter. I found this information for IBM Thinkpads: http://www.thinkwiki.org/wiki/Ricoh_R5C476. Since your machine is actually quite new (in the life span of PCMCIA), you may have one of them (which would require it's own driver, probably not available for OS/2). In ArcaOS go to a command and run C:\sys\install\DETECT\pci.exe to get a list of what is actually attached (be sure to attach everything, then boot, then run the program). That should tell you which PCMCIA controller you actually have. Redirect the output to a file, and post it here.

ArcaOS does not install everything that you will need, but they do supply what is available for supporting the base PCMCIA. You need to supply any other OS/2 drivers that may be required, and add appropriate lines to CONFIG.SYS. It is in the DOCS, but the DOCS are ancient, and they don't tell you the whole story. I suggest getting my LCSS (Logical Config.Sys Sort - it is at HOBBES) to be sure that the lines are in the proper order, and position, in CONFIG.SYS. Also be aware, that "old notebooks" may have more than one serial port built in (possibly only used when attached to a dock). You may also need to have it all connected when you boot so it can do a proper configuration.

You might have better luck (and better performance) with a USB serial adapter, but be sure to get one that is known to actually work. I have a Belkin branded one, that almost works, but it depends on what you actually use it for. Years ago, I was able to operate a modem, but it didn't work with my UPS, or when trying to do a serial port trace.

26
Quote
Dave - I attach an image of how far the boot goes. You can see that the usb drivers are loaded.

Loaded. yes. Operational, no. The USB drivers normally take a few seconds (a LONG time, at computer speed) to finish initializing. During that time, there is no access to USB devices. Since OS/2 doesn't have any way to wait for initialization, it just assumes that the media went away (or the required file(s) aren't there), so it throws the error.

Some machines have a setting in the BIOS, something about "USB hand off", where the BIOS will continue to operate USB devices, until the driver takes over. That may work, sometimes, but could be very timing sensitive. The switch would need to happen exactly between file fetching, or the switch could happen while the file is being fetched (probably not a good thing).

27
Storage / Re: Best way to copy a volume?
« on: February 09, 2021, 03:25:53 am »
I agree with Neil. ZIP, and UNZIP. Just use the ZIP/UNZIP as supplied by RPM/YUM, or you are limited to 2 GB in, and 2 GB out. Be sure to use the parameters -9yrS to get everything saved, correctly.

28
Applications / Re: PMMail Where to buy
« on: February 07, 2021, 05:45:03 pm »
Quote
I am interested in taking a look at the newer version, but when trying to download username and password are needed?

The user ID is included in the link. Use your e-mail address as a password.

29
Applications / Re: [SOLVED] Issue with lSwitcher
« on: February 05, 2021, 08:57:38 pm »
Personally, I only use the widget. It is far less trouble than the program.

All classes, for XCenter widgets, get loaded (when XCenter starts), even if you don't use them. It is probably a good idea to remove unused DLLs from the XCenter plugins directory. Just move them somewhere else (close XCenter first), so you can put them back if you decide to use them.

30
Applications / Re: Issue with lSwitcher
« on: February 04, 2021, 09:41:40 pm »
There are two ways to run lSwitcher. One is by a program, and the other is as a widget in XCenter. Do NOT attempt to run both at the same time (best to not even install both, at the same time). You need to manually select which way you want to run it, when you get to the list of install options. Neither one is selected by default.

Pages: 1 [2] 3 4 ... 98