OS2 World Community Forum
OS/2, eCS & ArcaOS - Technical => Setup & Installation => Topic started by: RTAN on October 13, 2024, 12:34:08 am
-
I'm installing WSeB 4.52 for [insert sensible reason here ;D ] and naturally I'll like to apply the most recent FixPak. As I understand it the final released FixPak was FixPak 5 or XR_E005. FixPak 6 was never released as final code.
I can find FixPak 3 on os2site.com at the following link but I can't find FixPak 5 anywhere at all:
https://www.os2site.com/sw/upgrades/wseb/index.html
Does anyone know if they ever made that publicly available, or is the reason that I can't find it because it required a Software Choice subscription?
Thanks,
Richard.
-
Hello Richard
I don't remember exactly which fixpacks were available under Software Choice, those were not the IBM ftp. I think it was fp4 and fp5 the ones from Software Choice
Regards
-
Thanks very much Martin.
I tried installing FixPak 3 (XR_E003) but when I ran Service.exe it told me that it found no products to service. I presume therefore that build 14.089 is equal to, or more recent than, FixPak 3.
If FixPak 5 ever turns up online anywhere I'll try again. I can't search Archive.org for the time being because it's offline due to a data breach and DDoS attack :( Honestly, who would do such a thing?!
Richard.
-
Thanks very much Martin.
I tried installing FixPak 3 (XR_E003) but when I ran Service.exe it told me that it found no products to service. I presume therefore that build 14.089 is equal to, or more recent than, FixPak 3.
If FixPak 5 ever turns up online anywhere I'll try again. I can't search Archive.org for the time being because it's offline due to a data breach and DDoS attack :( Honestly, who would do such a thing?!
Richard.
I think MCP fixpak packs where never official released to the public. You needed access to software choice. For OS/2 Warp 4 you also have fixpak 16 and 17. Could only be officially downloaded from IBM SWC website. So finding MCP 5 is likely to be very difficult.
Roderick
-
Richard,
You can do some cross-checking to determine if the Fix Pack should have installed.
Run syslevel.exe to report the content of your \os2\install\syslevel.os2 file. Then compare this to the FP3 readme.1st which lists the versions of OS/2 that the Fix Pack should apply to.
You may also have an \os2\install\syslevel.fpk that records with most recent Fix Pack install.
-
Hi Richard,
Fixpacks were the same for the OS/2 Convenience Packages and WSeB, IBM did not want to keep seperate trees at that stage.
xr_c005 & xr_c006 both exist, though not for public posting as they were Software Choice Subscriptions only. These days you would look at ArcaOS which includes the fixes.
FP5 (xr_c005) for WSeB was the last official one, FP6 (xr_c006) does exist but my notes on it are:
This is not officially released, didnt even make it to the ALPHA stage and there have been reports that it is very unstable. Best to stick with FP5 with updated pmmerge.dll file.
February 7, 2005
Build level 14.103
This Fix Pack applies to:
5639A6150 XR_4501 4.51 0C Convenience Package for Warp Server
for e-business (UNI)
5639A5550 XR_4501 4.51 0C Convenience Package for Warp Server
for e-business (SMP)
5639A6101 XR_4501 4.51 0C Convenience Package for OS/2 Warp 4
5639A6150 XR_4502 4.52 0C Convenience Package (2) for Warp Server
for e-business (UNI)
5639A5550 XR_4502 4.52 0C Convenience Package (2) for Warp Server
for e-business (SMP)
5639A6101 XR_4502 4.52 0C Convenience Package (2) for OS/2 Warp 4
5639A6150 XR_4503 4.52 0C Convenience Package (2) for Warp Server
for e-business (UNI) (refresh)
5639A5550 XR_4503 4.52 0C Convenience Package (2) for Warp Server
for e-business (SMP) (refresh)
5639A6101 XR_4503 4.52 0C Convenience Package (2) for OS/2 Warp 4
Requires Corrective Service Facility release f.144 or later
OS/2 Fix Distribution
Personal System Products
Austin, Tx
(c) Copyright International Business Machines Corporation, 1981, 2001.
Chuck McKinnis Notes:
The Object Rexx updated shipped in Fixpack 3 appears to cause problems with several Rexx-based applications. This update will backout that update to the previous level of Object Rexx.
Other users have reported problems with the PMMERGE.DLL module shipped in Fixpack 5. This update will backout that update to the Fixpack 4 level of PMMERGE.DLL.
fp5_up target_drive update_option
target_drive is letter (with semi-colon) of the drive to be updated
update_option is the update to be applied, rexx (OREXX.DLL) or merge
(pmmerge.dll).
Chuck McKinnis
25 April 2005
-
Thanks for everyone's replies. The version I have installed is reporting itself as Build level 14.089 so it makes sense that FP3 won't install since that's Build level 14.088 according to the Readme.1st document.
Those notes are interesting Chuck since it mentions a problem reported in FP3 that wasn't addressed until FP6 (the Object Rexx problem).
Running syslevel.exe I get:
SYSLEVEL.WSB
Convenience Package - OS/2 Warp Server for e-business
Version 4.52
Current CSD level: XR04502
Prior CSD level: XR04501
But there isn't a prior level - this was installed as-is from media downloaded from WinworldPC
Then further down (i.e. a after a few presses of the [Enter] key I get:
SYSLEVEL.OS2
Convenience Package - OS/2 Warp Server for e-business
Version 4.52
Current CSD level: XR04503
Prior CSD level: XR04503
And ver /r reports:
The Operating System/2 Version is 4.50
Revision 14.089
So it looks like the WinworldPC media has FP3 slipstreamed (to use a Microsoft phrase), I guess that was the last publicly available version but it's interesting that even FP4 (publicly released) doesn't appear to be available anywhere.
It's just a curiosity - obviously I'm not bothered by it per se, I just find it interesting that in all this time a Fixpak that was only available by Software Choice hasn't been made available (or uploaded to Archive.org) by someone who may have had it through their work.
Thanks for the responses and additional detail, it's always great to increase one's knowledge of these things!
Richard.
-
Actually, I think IBM had 4.51 and simply applied the fixpack, perhaps with other fixes, to create 4.52
-
Both CP1 and CP2 was released as a full package which was installed on-top of existing system so was never released as FP and just quickly checked CP2 which has a note about this:
WSeb C-Pak2 migration is supported only over a corresponding
C-Pak1 system. Otherwise, you must format the operating system
partition.
-
RTAN - not sure if this fits your needs - but I am running the networking part of WSeB on top of AOS 5.1. I think this might address fix pak issues - assuming those issues are related to the operating system rather than the networking/LAN server part. Alex Taylor has an install program and instructions for how to do this. You can do this with the WSeB networking on eCS or any version of AOS . After you install the operating system, without networking, Alex's program requires the WSeB CD and it installs the networking components from that CD.
-
I'm doing the same as Doug.
After I install LAN Server from WSeB, I apply Fix Pack IP08608. This Fix Pack can be applied over WSeB, or WSeB Convenience Pack 1 and 2.
-
RTAN - not sure if this fits your needs - but I am running the networking part of WSeB on top of AOS 5.1. I think this might address fix pak issues - assuming those issues are related to the operating system rather than the networking/LAN server part. Alex Taylor has an install program and instructions for how to do this. You can do this with the WSeB networking on eCS or any version of AOS . After you install the operating system, without networking, Alex's program requires the WSeB CD and it installs the networking components from that CD.
https://articles.os2voice.org/category/software/15-lan-server-installation-utility.html
Roderick