Topics

1

Hardware / Addonics OPL Sound Card - OS/2 Warp Connect

« on: April 29, 2023, 09:21:24 pm »

I'm trying to get this OPL (YMF701-S) sounds card working under Warp Connect. I have tried a few of the Sound Blaster options that come built-in but no luck. I have included a picture of config output. Not sure if this card is supported under OS/2.

2

Networking / KNE 2121+ Network Card - OS/2 Warp Connect

« on: April 29, 2023, 09:07:48 pm »

I'm slowly making progress in my quest to get a Tandy/GRiD 386sc installed with OS/2 Warp Connect. I'm now at the stage of trying to get network going. The computer has a Kingston KNE-2121 card installed and have verifed operation under DOS with mTCIP. I'm struggling a bit with OS/2 and just now sure what drivers work. I have started the MPTS config tool and select "LAN adapters and Protocols" - > "Configure" -> "Other Adapters"

I have found KNE-2100 drivers and its broken into 2 disks.

Disk 1:
PCNTNW.OS2

Disk 2:
MSLANMAN.OS2
 -PCNTND.OS2
-PROTOCOL.INI
-PCNTND.NIF

NDIS
-LANSERVR.OS2
--PCNTND.NIF
--PCNTND.OS2
LANSVR30.OS2
--PCNTND.NIF
--PCNTND.OS2

PKTDRV
PCNTPK.COM

3

Setup & Installation / OS/2 Warp 3 Connect CD Install / Boot Disk Update Help

« on: April 28, 2023, 01:10:02 am »

I'm ready to try and install OS/2 Warp v3 Connect (Blue spline) CD-ROM on my Tandy/GRiD 325sc. The systems boots using the 2 provided floppy disks but when it asks for the CD and I press enter nothing happens. It appears that the CD-ROM is not initialized, it won't even let me eject the CD. Once I boot back into DOS and the CD-ROM drivers are loaded I have no issue. In searching around it seems there is mention to update the floppy disks with newer ATAPI drivers and driver for larger HD support. The question I have is what and where are the drivers and do I just copy them to the floppy? I'm assuming I would need to edit some file to define the new drivers. Is there any guide for this?

4

Hardware / OS/2 Warp 3 Graphics Card Selection Input?

« on: April 20, 2023, 07:34:02 am »

I have a machine with 16-bit ISA slots and I'm looking to install OS/2 WARP Version 3. What would some graphics card recommendations be as I know driver support was always an issue with OS/2 that didn't get better to WARP 4. Been searching for a compatibility matrix for what drivers where included in WARP 3 but having a hard time tracking that down.