Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - David McKenna

Pages: [1] 2 3 ... 16
1
Multimedia / Re: Use of webcam
« on: Today at 04:05:00 am »
Lars,

 Screen shot attached - similar to Remy's, but not exact. I am using the ArcaNoae 12.06 USB stack including the USBXHCD driver, but audio is your 2: USBAUDIO.SYS and USBAUD2.SYS, ver 10.234.

Regards,

2
Multimedia / Re: Use of webcam
« on: July 04, 2020, 07:06:47 pm »
Hi Wim,

  I decided to give this a try with my Logitech C270, and it works! I ran:

webcam /u/x640/y360/a/h/n/s | ffplay -f mjpeg -framerate 50 -i -

 and got a window with live video. Then ran:

ffplay -f s16le -ar 48000 -ac 1 -showmode 1 -i \PIPE\Webcam\Audio

 and got another window with a live sound wave and could hear the echo of my voice... woohoo!

 When I went to shut it all down, I got a TrapE in USBEHCI when I closed the webcam console. I am using both of Lars' USBAudio drivers. The console showed a couple of errors, so I will upload a log of it in case it is interesting. Thanks for this great software!

Regards,

3
Programming / Re: Python 3.x?
« on: June 27, 2020, 03:15:55 pm »
Paul,

  While I don't use Python directly, it seems more and more things need Python 3 and I would definitely like to see porting to OS/2 continue, so it would be great if you could do so...

Regards,

4
 It works here only if using the OS/4 kernel on the host. http://www.gus.biysk.ru/os4/

Regards,

5
      You can also boot the disk/stick to the 'System Management' page, open a command prompt, and type 'copy Z:\USBXHCD.SYS C:\os2\BOOT <enter>' (if the normal boot drive is C:). Then add the line BASEDEV=USBXHCD.SYS to CONFIG.SYS before the other USB**CD.SYS lines (if any) but after usbd.sys. Seems to work OK so far...

6
Applications / Re: Cumulus weather software for OS/2
« on: May 16, 2020, 03:09:57 pm »
 It appears this software is available on Hobbes... search wcalcos2.zip.

7
Multimedia / Re: Updated Uniaud32 build
« on: May 15, 2020, 12:35:44 pm »
 Hi Paul,

  Looks like you've been busy! I tried all 3 and it is a mixed bag:

Linux 3.2: Can't boot, get the 'Not enough memory...' message described earlier
Linux 3.2.102: Can't boot, ends with a 'System detected an internal processing error....' type message.
Linux 3.5: Seems to work fine (system sounds and YouTube)

 I'll attach a debug log for 3.5. Thanks again!

8
Multimedia / Re: Updated Uniaud32 build
« on: May 13, 2020, 11:18:51 pm »
Hey Paul,

  Tried 'lxlite uniaud32.sys' on both the debug and release versions of 3.1.9 and it made them much smaller, but both still result in 'Not enough memory...' at boot. I am now running the new official version released at http:\\trac.netlabs.org\uniaud (20200506.exe) with no trouble...

Regards,

9
Multimedia / Re: Updated Uniaud32 build
« on: May 13, 2020, 10:41:06 pm »
Pete,

 System case is fine, the official UniAud works fine, and Paul's builds before 3.1.9 work fine. I'll upload a 'testlog generic' in case anyone is interested. Must be something else...

Regards,

10
Multimedia / Re: Updated Uniaud32 build
« on: May 13, 2020, 01:03:55 pm »
 OS4User - Tried decreasing VAL in increments of 512 down to 1024, but always the same result - 'Not enough memory...'.

Regards,

11
Multimedia / Re: Updated Uniaud32 build
« on: May 13, 2020, 12:16:40 pm »
Paul,

  Can't get the computer to boot with either the debug or release version of 3.1.9 - after the disk check there is a long pause, then a bunch of messages flash by and end with 'Not enough memory to run PMShell.exe on the Protshell = statement in Config.sys' (I have 8GB). Never saw that before!

Regards,


12
Multimedia / Re: Updated Uniaud32 build
« on: May 10, 2020, 09:07:06 pm »
Paul,

  No sound with this one either - debug log attached...

Regards,

13
Multimedia / Re: Updated Uniaud32 build
« on: May 10, 2020, 05:12:19 am »
Hi Pete,

  Good point to check the mixer settings. I notice a couple of additional settings in my Linux 3.2 mixer as well (compared to earlier ones) - expanded support in that version for my sound chip maybe? Master Playback and Master Switch are set the same in all the ones tried though, so something else is going on with Linux 3.2 here...

Regards,

14
Multimedia / Re: Updated Uniaud32 build
« on: May 09, 2020, 02:10:07 pm »
Paul,

  I gave the Linux 3.1 version a shot and it seems to work fine... I'll upload the debug alsahlp$ for it in case it's interesting...

Regards,

15
Multimedia / Re: Updated Uniaud32 build
« on: May 08, 2020, 10:00:22 pm »
Paul,

 FYI - I tried VLC with the Linux 3.2 driver, but still no sound. No errors at boot though, and it shows up in the hardware manager...

Regards,

Pages: [1] 2 3 ... 16