Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - roberto

Pages: 1 ... 31 32 [33] 34 35 ... 40
481

What kind of use are your .ps to?
To view, archive, convert into pdf, print them?
convert into pdf

Quote
I'll prefer the bit font, since the output has a better rendering.
Simply archive them?
It is right also the no bitmap one.
Are you using the latest firefox releases?
Yes, I am use the latest firefox 38.2.1
Quote
The bitmap font is much more suitable.
Your .ps are ok, as you can see their output in attach using my tools here.
I think that the ps no is ok. If you see the photo, show **Id** and your image only show **I**

Where I can download ghostscript 9.18 ? or can be better for print 8.71? I am running 9.15

Saludos

482
The ClearLook, with the font wps bold that is working well in others programs, give me this error in printer:
Code: [Select]
%!
% lib/ehandler.ps -- Downloaded Error Break-page handler
% Copyright (c) 1984, 1985 Adobe Systems Incorporated. All Rights Reserved.
% RCSID: $Header:   L:/pvcs/passion/down21/windown/ehandler.psv   3.0   28 Aug 1992 16:46:42   JKEEFE  $
% assumes serverloop password is the default one
/$brkpage where
{pop(Error Handler in place - not loaded again\n)print flush stop}
{serverdict begin statusdict begin 0000 checkpassword
 {(Error Handler downloaded.\n)print flush 0000 exitserver}
 {(Bad Password on loading error handler!!!\n)print flush stop}ifelse
}ifelse
/$brkpage 64 dict def $brkpage begin
/prnt
 {dup type/stringtype ne{=string cvs}if dup length 6 mul/tx exch def/ty 9 def
  currentpoint/toy exch def/tox exch def 1 setgray newpath
  tox toy 2 sub moveto 0 ty rlineto tx 0 rlineto 0 ty neg rlineto
  closepath fill tox toy moveto 0 setgray show}bind def
/nl{currentpoint exch pop lmargin exch moveto 0 -9 rmoveto}def
/=={/cp 0 def typeprint nl}def
/typeprint{dup type exec}readonly def
/lmargin 72 def
/rmargin 72 def
/tprint
   {dup length cp add rmargin gt{nl/cp 0 def}if
    dup length cp add/cp exch def prnt}readonly def
/cvsprint{=string cvs tprint( )tprint}readonly def
/integertype{cvsprint}readonly def
/realtype{cvsprint}readonly def
/booleantype{cvsprint}readonly def
/operatortype{(--)tprint =string cvs tprint(-- )tprint}readonly def
/marktype{pop(-mark- )tprint}readonly def
/dicttype{pop(-dictionary- )tprint}readonly def
/nulltype{pop(-null- )tprint}readonly def
/filetype{pop(-filestream- )tprint}readonly def
/savetype{pop(-savelevel- )tprint}readonly def
/fonttype{pop(-fontid- )tprint}readonly def
/nametype{dup xcheck not{(/)tprint}if cvsprint}readonly def
/stringtype
 {dup rcheck{(\()tprint tprint(\))tprint}{pop(-string- )tprint}ifelse
 }readonly def
/arraytype
 {dup rcheck{dup xcheck
  {({)tprint{typeprint}forall(})tprint}
  {([)tprint{typeprint}forall(])tprint}ifelse}{pop(-array- )tprint}ifelse
 }readonly def
/packedarraytype
 {dup rcheck{dup xcheck
  {({)tprint{typeprint}forall(})tprint}
  {([)tprint{typeprint}forall(])tprint}ifelse}{pop(-packedarray- )tprint}ifelse
 }readonly def
/courier/Courier findfont 9 scalefont def
end %$brkpage
errordict/handleerror
 {systemdict begin $error begin $brkpage begin newerror
   {/newerror false store
    vmstatus pop pop 0 ne{grestoreall}if initgraphics courier setfont
    lmargin 720 moveto(ERROR: )prnt errorname prnt
    nl(OFFENDING COMMAND: )prnt/command load prnt
    $error/ostack
    known{nl nl(STACK:)prnt nl nl $error/ostack get aload length{==}repeat}if
    systemdict/showpage get exec(%%[ Error: )print
    errorname =print(; OffendingCommand: )print/command
    load =print( ]%%)= flush}if end end end}
dup 0 systemdict put dup 4 $brkpage put bind readonly put
%%Pages: 1


saludos

483
The program Clear Look, with the last font and with the bit font, close the program only when go to print.
This program have an extra utility that can define many values of the font. What values can be the better?
The demo is:
http://hobbes.nmsu.edu/h-viewer.php?dir=/pub/os2/apps/wp&file=clwm171.zip

Saludos

484

This is a personal choice, but if you prefer anti-aliasing (which i.e. is enabled on  new web browsers)
Do not understand what you mean anti-aliasing?

Quote
the bitmap one is more suitable. To the other hand, the non bitmapped release can cause an irregular glyph scaling on some point sizes (scaling which yourself have seen) whitout anti-aliasing, exactly as Alex reported.
Regards.
If you have to tell me something, do it as if I were a child of 2 years. I have to translate what you say and I have to understand you. And I do not understand you.

Be patient , we can explore other possibilities:
Using other programs.
Open office org. 411, screen ok, but the file.ps can be bad? the gsview not open. But I think that the ps is ok.
Ibmworks, screen is bad, but this can solved is charge the font in the fontmanager in psprint,(i do not want in firts), this program not cut the text, the text is displace to right. The file.ps is ok.
In Dbexpert, the font helvetica is ok in screen and in ps. (In principle rule out an error in the dbexpert)
Other programs?
   
Make a scale from largest to smallest size in the text sample.

Saludos

485

For my personal opinion, the right-justified one looks better, anyway, the font rendering is the same on both. I'll suggest you to use the bit font.
I understand that you need the bit and without bit font?
I include the bit file. I do not send the image that is the same as before send.

Saludos

486

Quote
I also found that JFS 1.09.06 could lose a volume at boot - chkdsk does not report the volumes existence during boot and when booted to the Desktop that volume is missing. Sometimes simply running LVM and Saving when Exiting without making any changes made the volume available; sometimes it needed a reboot.
I do not see this problem, but in same times, after restart I see that I can not open all the folders in drives, in this case close the system and restart again solve the problem. If this not solve your problem, leave 4 hours off the pc and restart it.

Two explanations of this, I do not install the DaniS506-1.08.15.exe .But I have installed all other updates.
Before you start working with your computer , open drives in screen,  not a command com, with the mouse . The largest unit with more folders, i have aprox.200 folders, if you open and can move to the end without problems , continuous working , if not restart the computer again to find a correct start . After this simple test, the system is a rock .
This told me someone here , that is only a problem in the beta , which will be resolved in the final version .
saludos

487
The latest no bit.
Regards
I include 2 files, you decide. One with text justified right and other justified left. More small, only 2 fonts.

Saludos

488
When you state "ecs22beta2+updates" does that include JFS 1.09.06 from Arca Noae?
I am runnig in 2 pcs, one with this config and another with ecs2.0 + updates.
Quote
I ask because I had problems with that update which I could only resolve by reverting to the JFS 1.09.05 supplied with eCS2.2beta2
With jfs 1.09.06 I am running very well.(in my test pc or laptop)

Quote
If there is some sort of system crash it is possible that hard drive volumes seem "clean" to jFS autocheck on reboot but if it is possible that the volumes can be "Dirty but marked as Clean"  - I think that is the wording used by chkdsk - so a standard /AUTOCHECK:* will not work.
Yes, I detect this problem in a ecs2.0+updates. Because I do not restore the os2inis, only run a chksdk from CD, and all repair.

Quote
With JFS 1.09.05 and earlier it is possible to Force a chkdsk at boot by using the parameter /AUTOCHECK:+* for all volumes or specify individual volumes /AUTOCHECK:+D+G

JFS 1.09.06 does not support the /AUTOCHECK:+ parameter so it is not possible to force a chkldsk at boot when using that JFS release.
Thanks for explain it, this leave my very confused.

Quote
I also found that JFS 1.09.06 could lose a volume at boot - chkdsk does not report the volumes existence during boot and when booted to the Desktop that volume is missing. Sometimes simply running LVM and Saving when Exiting without making any changes made the volume available; sometimes it needed a reboot.
I do not see this problem, but in same times, after restart I see that I can not open all the folders in drives, in this case close the system and restart again solve the problem. If this not solve your problem, leave 4 hours off the pc and restart it.

Saludos

489
Hello Barbra
The lates files I send you was made with my work pc, and are made with a Ghostscript 8.71, and the previus files are made with 9.15. If yuo prefer I can repeat it for tomorrow with the other ghostscript.
Saludos

490
Let me know if you wanna test also the 1.000 no bit, i'll convert it.
No problem, all you need.
Saludos

491
Apparently os2 inis corrupt.
Restart with a cd ecs2.2beta, and run a chkdsk to boot partion c: jfs, restart and all ok again.

For me, this is a problem in AUTOCHECK in JFS, that in same cases no detected that it have to check the boot-drive.
IFS=C:\OS2\JFS.IFS /LW:5,20,4 /AUTOCHECK:*
There is any option for force check in all cases the drive c?

Saludos

492

Since i don't have it, what about dbexpert?

I test in dbexpert this 2 fonts. I send the screen is the same in 2 cases, and the ps show the same. I only test the printer with the wpsu-bitmaps and is = ps.
But with the font wpsu without bit wpsu139size, after restart the system ecs2.0, the desktop show corrupt, a new restat and corrupt.  Apparently os2 inis corrupt.
Restart with a cd ecs2.2beta, and run a chkdsk to boot partion c: jfs, restart and all ok again. I can not ensure that this problem is with the font.
Saludos

493
Internet / Re: Thunderbird 38.6.0
« on: March 22, 2016, 08:57:15 am »
Hello
With this version thunderbird, the Integrated Calendar for thundebird have a problem. I disable it.
The problem is  when I leave the computer running on day and night. I usually leave closing applications and backups at night. If I have activated the calendar , the next day I can not open the Tunderbird , and I have to restart the computer. This is in ecs2.0
Saludos

494
This fonts not hang the system, but you can see the screen and the ps= is the printer:
wpsu-bit-normal94
wpsu-withoutbit-normal111
wpsub-bit95
wpsub-withoutbit55

In the ps the text ***Id*** is cut.
In screen in text ***Last name*** with wps bold the font show as courier.

Saludos

495
has anyone tested with the latest? Also compared the version with included bitmaps vs none?
http://www.altsan.org/creative/fonts/workplace/wpsu_bit_100.zip, with included bitmaps

Hello, with this bitmaps font, do not hang, but in screen show in correct position the text. But in ps is the same = printer in paper, in same cases the text is move.

I go to test the other font...

Pages: 1 ... 31 32 [33] 34 35 ... 40