Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Martin Iturbide

Pages: 1 ... 8 9 [10] 11 12 ... 195
136
Hardware / Re: Hardware Wiki report
« on: January 12, 2021, 09:31:06 pm »
Thanks Ivan

Let me know if the M.2 SSD/SATA will work once you get it.
If you want, you can post the PCI.exe report so I can create the wiki page for that mainboard.

Regards

137
Setup & Installation / Re: Arca media options
« on: January 12, 2021, 06:42:33 pm »
Hi

Sorry to jump almost out of the subject here. On old computers, I found it very useful to replace the hard drive of it with a "SD to IDE" card. Since it is an old computer and sometimes it will not support HDD bigger than 8GB, or 32GB, replacing the HDD with a SD card is very practical to clone the OS to the SD from another computer.  Also the SD card is a lot faster than the old HDD.

Of course it depends on how people want to use the old computer, some people like to have the original hardware and the same 90's experience of the old HDD.

Regards

138
Multimedia / Re: Updated Uniaud32 build
« on: January 11, 2021, 07:53:02 pm »
Big thanks Paul for getting the UniAud drivers to the latest linux kernel level. From may 2020 to today you have generated 65 compilations of the driver. Awesome.

Regards

139
Multimedia / Re: Updated Uniaud32 build
« on: January 10, 2021, 03:34:37 pm »
Doug:
FYI: I have a hardware report on "AMD FCH Azalia Controller  1002:780D" that was not working with UniAud 2.2.6 on the Thinkpad E555. Is it working now with uniaud32-linux-5.10.5-20210108.zip?

Regard

140
Hardware / Re: USB Scanners and ArcaOS
« on: January 09, 2021, 06:23:50 pm »
Looking through your debugoutput.txt file it looks as though sane/scanimage does not have support for the epson scanner as both epsonds and espon2 sections show a list of pci ids which those backends support and 0x04b8/0x1135 is not listed.

You could try adding the pci ids to the epsonds and epson2 .conf files # USB section eg epson2.conf:-

# epson2.conf

Thanks Pete. I just did that with epson2.conf following your advice.

What should I do now to test the scanner?

I'm attaching the new "scanimage -v 1>output.pnm 2>debugoutput.txt"

Regards

141
Multimedia / Re: Updated Uniaud32 build
« on: January 09, 2021, 06:05:58 pm »
Hi

https://smedley.id.au/tmp/uniaud32-linux-5.10.5-20210108.zip

I tried "uniaud32-linux-5.10.5-20210108.zip" on the Thinkpad L420.
- No Trap. Sound is working. Master volume control working. PMUnimix 0.82 master volume working.

Congratulation on reaching this Linux kernel level release.

Regards

142
Hardware / Re: USB Scanners and ArcaOS
« on: January 09, 2021, 04:51:49 pm »
Hi

I'm back with the USB scanner testing.

- ArcaOS 5.0.6 - 14.202
- AN USB Driver 12.07
- USBRESMG.SYS 12.07
- USBCALLS.DLL -  2020-08-15 -12.07 - (only one on the system - no usbcalls from rpm installed).
- libusb1 - 1.0.21-2
- libusb1-legacy-0 1.0.16-2
- Sane from Netlabs RPM - sane-backends - 1.0.28-2
 
- Epson L4150 multifunction printer (04b8:1135)

Config.SYS
Code: [Select]
set sane_config_dir=x:\etc\sane.d
set SANE_DEBUG_epsonds=255
set SANE_DEBUG_SANEI_USB=255
set SANE_DEBUG_DLL=255

LSUSB
Code: [Select]
[X:\]lsusb
Bus 001 Device 001: ID 046d:c077 Logitech, Inc. M105 Optical Mouse
Bus 001 Device 002: ID 04b8:1135 Seiko Epson Corp.
Bus 001 Device 003: ID 147e:1002 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor
Bus 001 Device 004: ID 05c8:0317 Cheng Uei Precision Industry Co., Ltd (Foxlink)

Do any new drives appear in the Drives folder when you attach a scanner?
No

OS2DASD
I had this trap on OS2DASD when I run "ScanImage -L"
I REM OS2ASPI.DMD (I think I have no need for it on the Thinkpad L420), rebooted and for the moment the trap is gone.

Testing
I did the "ScanImage -L >out.txt" and I got the "No scanner were identified".
Code: [Select]
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

Here it is the "scanimage -v 1>output.pnm 2>debugoutput.txt" results.

This is how I stand now, what else do you suggest to try to make the "04b8:1135" scanner to work?

Regards


143
General Discussion / Re: Revolutionary PC Technology
« on: January 08, 2021, 04:25:46 pm »
But Apple was having big business problems. Microsoft bailed them out, and Apple's board got Steve Jobs back. Jobs killed MacOS 9 and replaced it with NeXt, renaming it Mac OS X. The clones were not included in these plans. OS/2 was out. IBM didn't want it, Apple didn't want it.

I remember those days from college.  The Apple iMac became the best selling PC of 1998. In my college we used Mac OS 7, 8 and 9 for some graphics design and even office courses. I personally think that MacOS 8 had a nice GUI, but it was not as stable as OS/2 Warp 3 or 4. MacOS 7,8,9 has the same internals and I remember the icon of the "bomb", that was like our "trap", showing from time to time while working on that computers.

Mac OS X (2001) was a different thing based on FreeBSD ("independent implementation" they call it) and I think with some time and patches MacOS X became more stable than MacOS 9 was.  Steve Jobs (and his team) now had a new line of iMacs selling good to the youngsters, a new OS (based in "unix") and market presence. He did save Apple at that time. In 2007 with the iPhone he took Apple where it is today.  On 1997 Apple was a niche dog for graphic design that investor thought  the only path for it was "going down", now it is monopoly

Very nice memories.

Regards

144
General Discussion / Re: Revolutionary PC Technology
« on: January 08, 2021, 04:13:00 pm »
Hi

Just wondering over the discussion, my opinion was that IBM at that time (mid 90's) was too big, and had also too many products. Microsoft was lean and focused exclusively on Windows and Office...and MS used the "art of war" to sell software  ;D

While IBM had  a good position on the business market selling technology to other companies, when the PC showed up, it started to became a consumer good. Bill Gate's dream of "one PC per home" indeed was right at that time, the PC was going to became a home device instead of a corporate tool.  IBM's PC market suddenly became a customer electronic circus, while they internal structure was focused on selling to corporate customer.

I think that OS/2 was a casualty of that. The owner of OS/2 didn't understand the "customer electronic circus market" while Microsoft took a dive into it. When Lou Gerstner arrived as IBM CEO (1993) he focused on corporate solutions. When IBM sold the PC unit to Lenovo (May 2005), so the can focus on that "circus", OS/2 was cancelled a long time.

Regards.

145
Hardware / Re: USB Scanners and ArcaOS
« on: January 08, 2021, 03:01:03 pm »
Hi

Ivan, I don't have the need to scan documents on OS/2, I'm just testing the hardware that I have around. Your suggestion is complete valid, but this is more like an experiment with the hardware that I have.

I will keep testing on the weekend and see what else can happen with these hardware I have.

Regards

146
Applications / Re: ArcaOS Yum updates question
« on: January 08, 2021, 02:58:36 pm »
Hi David

For ArcaOS updates you need to download the ISO and run the update procedure by booting the ISO file (DVD or USB Flash). For what I know no internal components of the OS or AN drivers are available to be updated from yum or ANPM.

Separate components like ACPI drivers, USB, etc are available for download on the Arca Noae webpage after you logon.

Regards

147
Hardware / Re: Hardware Wiki report
« on: January 07, 2021, 08:41:35 pm »
Thanks Ivan.

I fixed the issue. Here it is the link for the Brother ADS-1600W (Scanner).

I lack a lot of experience with printers drivers. I will need to read more about it, and everybody is welcome to write some quick article for the wiki on tips on how to install printer drivers in 2021 :)

On these days I got these reports:
Lenovo Thinkpad E585‎‎
- Lenovo Thinkpad E575

Regards

148
Hardware / Re: Hardware Wiki report
« on: January 07, 2021, 04:29:06 am »
Thanks Ivan.

I created this two pages:
- Brother DCP-9020CDW‎‎
- Brother HL3170CDW‎‎

Let me know if you want to add more information.

Regards

149
Hardware / Re: Hardware Wiki report
« on: January 06, 2021, 06:52:55 pm »
Hi

BTW, the last thing that I personally tested successfully was the USB "HP Gaming Headset H320GS". Speakers and Mic working.

Regards

150
Multimedia / Re: Updated Uniaud32 build
« on: January 06, 2021, 06:46:13 pm »
https://smedley.id.au/tmp/uniaud32-linux-5.10.4-20210105c.zip

I just did a quick test with "uniaud32-linux-5.10.4-20210105c.zip" on the ArcaOS 5.0.6 VirtualBox VM (Intel HD Audio) on W10 host on the TP Yoga 14.
No Trap. It produce sound and I have control of the volume with the master volume tool. Working good for the moment.

Regards

Pages: 1 ... 8 9 [10] 11 12 ... 195