Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - ivan

Pages: [1] 2 3 ... 66
Hardware / Re: CUPS EPSON ET-4700 printer problems
« on: September 21, 2019, 12:20:06 am »
Hi roberto,

Sorry about possibly leading you down the wrong track but that was the only way I could get my DCP-9020cdw (colour laser / scanner) and HL-3170cdw (colour laser) to work over the network.  I could never get CUPS to work so I looked for an alternative and it works.  I even use the Brother Linux drivers on my two Linux computers rather than CUPS.

Hardware / Re: CUPS EPSON ET-4700 printer problems
« on: September 19, 2019, 06:13:21 pm »
Any particular reason for using CUPS? 

I ask because all my Brother printers that have a PPD have been added to the PSPRINT driver and are available using SLPR over the network.

Hardware / Re: SNAP and dual-head display setup recommendations...
« on: September 19, 2019, 11:44:36 am »
Now if SNAP would work with the Radeon Vega 8 Graphics of the Ryzen processor I could get back to what I used to have on my old computer, a couple of 28 inch 1920x1200 monitors.

SNAP is not happy with the Vega graphics and Panorama works as long as I don't want to do anything with extensive graphics activity.

Setup & Installation / Re: Warp 3 with WINOS2
« on: September 10, 2019, 07:00:04 pm »
Hi Mathias,

Depending on what you are trying to do you either need a copy of OS/2 Warp 3 blue spine which includes winos2 in the install, or if you need networking then you need to install OS/2 Warp 3 Connect, it has winos2 and all the networking that was available at the time (at least my CD does).

I can post the various readme files from the CD if that would help.

Which NIC driver are you using on both machines?

I assume the ArcaOS one is using the MMRE driver and I have found it problematic in reporting  throughput - I had to stop using IPSPEED.exe because it never reported any speed or throughput, I had no problems while I was using NVETH driver by Nickk.

Applications / Re: ODIN Revisited
« on: August 31, 2019, 05:39:36 pm »
Hi Dave,

Am I reading that right by using xx2lx.exe I can convert win 95/98 DLLs to ones that work with Odin or am I missing something?

Applications / Re: XWP v1.0.13 Beta 1
« on: August 31, 2019, 05:35:00 pm »
I have a strange problem. 

Since it is impossible to install ArcaOS on a Ryzen based motherboard unless you clone the drive I setup an ASUS board with an AMD A-SERIES A8-9600 processor that does allow the install from Aos 5.0.4.  Now thinking I would update the clone image I updated XWP v1.0.12 to this beta wondering if the 'no switch off' problem had been fixed, unfortunately it has not and this is the problem since all the Ryzen 3 2200G based units with the same motherboard do switch off without problems.

From what I can see there shouldn't be that much difference between the A8-9600 and the Ryzen 3 2200G that would cause the problem.

Any ideas or observations will be appreciated.

BTW everything with this XWP beta works except as above.

Applications / Re: ODIN Revisited
« on: August 30, 2019, 11:22:31 am »
Sorry, I learned a long time ago that you can't just add/use windows DLLs to Odin - they don't work.  The OS/2 DLLs are LX while the Win DLLs are ME.

Applications / Re: ODIN Revisited
« on: August 30, 2019, 01:36:55 am »
Hi Martin,

A couple of screen shots if IrfanView running under my old original Odin v.088 install.

Events / Re: ArcaOS 5.0.4 is out!
« on: August 28, 2019, 05:07:04 pm »
ISTR FF 38 works better with older hardware,

Just an addition.  It runs very well on my AMD Ryzen based computers both with ArcOS and Zorin Linux.

Some of the stupidity I'm seeing with the browsers is very reminiscent of Microsoft's war against Netscape but now it looks like Google Chrome has some 'oddities' that web designers are using to the detriment of other browsers.

Edit: I should have added that I also use FF 60.8.0 esr on the Linux computers as well.

Applications / Re: A comprehensive guide to Odin available?
« on: August 26, 2019, 12:44:49 pm »
The IT industry are gearing up for the subscription model for all of Microsoft's cloud offerings.  There will not be any more 'buy once and use forever' Office offerings - if it is in the cloud you pay per month.

For those living and working in Europe there is also the GDPR which governs where data can be stored - if MS moves it out of Europe then the owner of the data can be held responsible if the data is leaked.

Last thing, who trusts a company that regularly uses its operating system to scan your computer and send data about what you are working on, your banking details and other sensitive information back to home office the be 'evaluated'?

Applications / Re: A comprehensive guide to Odin available?
« on: August 24, 2019, 11:05:23 pm »
I don't remember ever seeing any type of manual for Oden but it is very simple to make a program object (see attachment) and if the program doesn't work it will generally tell you what is missing.

BTW, the full 'Parameters' line in the example is:   "d:\odin\program files\irfanview\i_view32.exe"  Note the quote marks - they are necessary.

Article Discussions / Re: Qt 5 Base for OS/2
« on: August 15, 2019, 10:19:36 pm »
Thank you Dmitriy, at least I can continue proof reading and editing, hopefully without problems.

Article Discussions / Re: Qt 5 Base for OS/2
« on: August 15, 2019, 05:08:23 pm »
A question, How backward compatible is it?  In other words will it run Qt 4 programs or do we need to keep our Qt 4 install?

I ask because I have about 25 Qt 4 programs that get from daily to weekly use.

Internet / Re: The new browser / QT5
« on: August 15, 2019, 05:01:09 pm »
Like Dave I installed it on my Linux Mint computer and I too am totally not impresses with the UI and the fact that there doesn't appear any way to change it. 

Not a browser I would use unless forced to do so - even firefox is heading that way and don't mention chrome.

Pages: [1] 2 3 ... 66