Hardware:
Processor
1.2GHz VIA C7-M ULV Processor
Chipset
VIA VX700 System Media Processor (integrated North & South Bridge)
Memory
DDR2 SO-DIMM up to 1GB
HDD
30GB (optional 60GB)
LCD
Panel 7" WVGA 800x480 with Touch Panel
Graphics
VIA UniChrome™ Pro II IGP Integrated 3D/2D Graphics with shared memory up to 64MB
Audio
VIA Vinyl VT1708A HD Audio codec
2 speakers
Networking
Realtek RTL8100CL 10/100 Mbps
Wireless LAN
Azure Wave 802.11b/g (USB interface)
I/O 4-in-1 Card Reader
1 DVI-I port
2 Hi-Speed USB2.0 ports
1 RJ45 Ethernet port
Audio jacks
• 1 Mic-in audio jack
• 1 Array Microphone jack
• 1 Headphone (line out) jack
Setup:
RC6
ACPI (Debug)
DASD (DANIS compatibility)
1 USB CD-ROM (boot from USB cdrom enabled)
Will not boot past the boot blob.
Nvm, seeing as near every file failed the MD5 check on the pre-boot I can hardly expect this to work properly. Attempt two to dl and burn again.
ACPI On + VGA + DANIS Compat + USB CD Boot yields the best result so far, being that it pauses for minutes on end then gets to the part where it shows the USB CD-ROM driver info then asks for the CD to be inserted.
Nevermind. If anyone wants a go at it, you are more than welcome:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160303761579&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dm38%26_nkw%3D160303761579%26_fvi%3D1