Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - CDRWSel

Pages: 1 ... 6 7 [8] 9 10 ... 28
106
Multimedia / Re: AVxCAT (formerly FFMPEGCA) version 1.2.0
« on: 2011.03.06, 17:41:34 »
For those interested by mp3 "normalize" option using mp3gain automatically called by AVxCAT could send me an email and I'll provide them the test build (futur) and howto proceed.

Cheers
Remy   

107
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.03.05, 20:34:49 »
Hi Dave,

I hope you click at least one time on the ClamAV-GUI save button ! (This is a must)  

Wrong opened config file is no more possible due as soon you responded to the message asking you to choice the correct config file at first clamav-gui run time, the path is forced all the time to use this user selected config file with the right name which of course is different. Other existing config files are all ignored...  

About freshclam backup file, this is no more possible too.
You'll have one config file for clamd and fresclam under ClamAV-GUI path and only if you change the database path, a backup is created (there was a bug into previous build but this was corrected and only this condition will create a backup). You must have pressed at lease one time on save to save the presented configuration despite it is correct at first run time to confirm it and save it for reference.  

I would suggest you to erase existing "clamavgi.ini" file et restart ClamAV-GUI. May be something got wrong with it which could explain some issue you have.
By default, clamavgi.ini is under ..:\OS2 path except if you moved it under ClamAV-GUI path. Removing ClamAV-GUI doesn't erase the ini file which is take by any new installation.     

I was waiting on your INI files several days to check it but didn't get it into my mailbox.
May be you can send it to me before you erase it. Thanks

Do you have 2.1.2e ?

Cheers
Remy

108
Fine that you found howto.

Just for information, 2 links about redirection
http://www.robvanderwoude.com/battech_redirection.php
http://www.robvanderwoude.com/redirection.php

109
Multimedia / AVxCAT (formerly FFMPEGCA) version 1.2.0
« on: 2011.03.04, 04:24:53 »
AVxCAT major release 1.2.0 is out
This is an Audio Video eXtended Conversion Authoring Tool using FFMPEG as main tool
It is a very nice GUI with lot of possibilities. 
- Convert not protected DVD film into portable codec (full film or any vob file)
- Convert Audio-CD to any supported audio codec (mp3, ogg, wav, flac etc...)
  With cddb (cddb2wav) support or not
- Convert any audio/video files to any audio supported codec
- Convert any audio/video files to any video supported codec
- Preserves IDTAGs or Metadatas is possible (codec dependant)
- Create slideshow or animation out of pictures
- Create video chapters and presentation (with possible) sub-titles
- Create user profiles to accommodate end-user most used options
- Apply VoiX filters
etc...

Added corrections and new function makes this release a main release.
I hope Jep could try it to create his OS2 mpeg1 video (this released one agains the test one has the codec type for animation enabled which allow to change from default FLV (Flash) to an other format like AVI etc...

Regards,
Remy

Note: If any bugs are found, please use the write to author option. This one should work with thunderbird or PMMail.   

110
Article Discussions / Re: Tree View Popuplation
« on: 2011.03.04, 00:26:12 »
Yes,

WPS often hangs.
Other case of hang. When I move a big folder with many files and sub-folders under it to an other disk location using:

Open folder location where folder to move resides
Open folder location where I expecte move the folder

Select folder from source + RMB and select move from the menu
Into the destination, select the open destibation folder and proceed. After several files and sub-folders are moved, all system hang !
I have to power off/on to restore the system.

RD     

111
Multimedia / Re: How do I convert this?
« on: 2011.03.03, 04:30:41 »
I refreshed v1.2.0 test build
(added an audio extraction from video file correction + option to add voix filters on all files from the list + updated doc)

Kind regards
Remy   

112
Article Discussions / ClamAV GUI version 2.1.1
« on: 2011.03.03, 02:00:43 »
Quote
ClamAV GUI version 2.1.1
Posted by Martin Iturbide - Monday, 28 February 2011

Hi,

Just to inform you that ClamAV-GUI V2.1.2 is released yet
This is a major update build and I suggest go to it as soon as possible
http://remydodin.levillage.org/Clamavchg.html


note: You may (or not according your environement) have to replay to two messages at first run time only.

Kind regards,
Remy  

113
Multimedia / Re: How do I convert this?
« on: 2011.03.02, 23:59:47 »
Now,

To get a default OS2 player compatible video with high quality.
- OS2 player is limited in its max size (any value above 480x360 I tried didn't play)

Starting with this, as soon you downscale a size with a video tool, you'll lose quality.
To prevent this, create the BMPs at the expected resolution (in this case 480x360) using a great bmp converter like PMVIEW (at 480x360, quality is very good and the blue has no bad degraded colors in it)

Now, follow steps I give above. At last step after switch to "User defined value"
Select type "mpeg-OS2" and check you have Size to "Default"
Press Go and you'll get an xxx.mpg compatible OS/2

You will be surprised that this resolution once you put it in fullscreen with the default os/2 player always gives a good visual quality (you can increase the video "Bitrate" to increase its quality but it increases the file size too.   

Of course, you can take your original video as input and use directly the profile "AVI/Mpeg1 os/2 player 480x360" but in this case, I suppose a downscale will happen and the quality will then be degraded (e.g. the bue in your picture will have bad degraded color level despite what you try)

Cheers
Remy 

114
Multimedia / Re: How do I convert this?
« on: 2011.03.02, 22:44:55 »
Hi Jep,

You can do it using AVxCAT.
Just create a dummy audio file for the time it should play (or a background music you prefer).
In any case, this audio file must have the final time lenth of you video (use any audio file, set the volume to its minimum value and use the cut option to adjust it time. This will give you a dummy mp3 audio file

Next, set AVxCAT to Video mode
- Select "FLV flash *slideshow*"
- Select/Add the dummy audio file you created
- Select advanced option and click RMB on the "thumbnail viewer".
- From the RMB menu, "select new Picture" and choice the first numbered picture of you list (may be *.001) - be carefull, all pictures must be same size (and BMP)
- Don't change the formet nor change size from default under the main menu (picture size is always taken)
- Change the Frate (default "0.333" for slideshow) to may be "25" for great animation if you created 25 images be played in one second (generally what is done for a very nice rendering)

Note: The default output format is Flash (FLV)
           If you don't like this format, you can change it doing like this as last step before press GO
           - Don't modify previous settings
           - Change the profile from "FLV flash *Slide-show*" to "User defined Value"
           - This preserves all your setting and enables user specific settings
           - Change Type from "flv" to "avi-xvid" or other options (try not use mp4) and you'll get a very high quality AVI video (tip top) with the size of the created bitmap (e.g. 800x600 (4:3 sized) or a compatible 16:10 sized picture for 16:10 video)          

Click on GO and view how nice you animation is with your selected video codec  
I did a try creating an AVI like I describe it above with some of you bmp and Whouah ! very beautiful

I would you suggest to try my new test build from today. It has some enhancements and this part should be a bit simplifed (previous build has two more actions be done as it is described above)    
Get it here:

http ://remydodin.levillage.org/outils /AVXCAT_S-1_2_0.wpi

Please remove blanks in the link name
Read the readme.1st file about changes into this test build  

Kind regards,
Remy

115
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.03.01, 03:18:12 »
 :o

My supposition was right!  I redo the dropped code from last save
and I added code to set the freshclam config file to use.

Could you please get the v2.1.2 again ?
I refreshed it

Thanks
Kind regards
Remy

116
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.03.01, 01:57:28 »

 Start ClamAVGUI, go to 'Settings' -> 'Clamdscan(conf)' and /etc/clamd.conf opens. Go to 'Settings' -> 'Freshclam(conf)' and /etc/freshclam.conf opens. This is correct for my setup.

 Now go to 'Settings' -> 'ClamAV GUI' and hit 'Save' (you can make a change or not). Go back to either 'Clamdscan(conf)' or 'Freshclam(conf)' and now it opens C:\Programs\ClamAVGUI\xxx.conf. This is not correct.

  Also I still get a new freshclam.conf file and copied backup the first time I hit save in ClamAV GUI settings.


Hi dave,

I'm no more able to get the error about clamd.conf since I did changes.
I could get the freshclam.conf issue you described
This is because you use the clamav provided conf files instead of the clamav-GUI customized freshclam config files which has several backup links configurated in case some update links didn't respond

I didn't change this part of the code and will check this too.

I suppose you choiced to use clamd.conf and not clamd_GUI.conf ?
This selection always forces use of the this config file.... Or did a change I made under the save button dropped ! (I got this kind of problem a few build before and I'll check this and review the code about freshclam)     

Well, could you please send me your clamavgi.ini file under boot_drive: \os2 or under clamavgui path if you moved it there.

Use my clamav-gui "write to the author" email address.
Thanks

Kind regards,
Remy
  
  

117
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.02.28, 15:49:31 »
Hi Dave,

I updated the V2.1.2 test build which seems be very good for me an from other returned feedback but none under RPM/YUM.

Under an other forum thread (in discution with Doug), it was expose the problem to start multiple instance when dropping multiple files on the ClamAV-GUI icon due to same used logfile despite this one has a name using time in seconds in it.
Now I resolved it and you can drag/drop one or multiple files on ClamAV-GUI icon for ponctual scan (up to 1000)

You can get the refreshed v2.1.2 from here
 http ://remydodin.levillage.org/outils/ ClamAVGUI-2_1_2.wpi

Please remove blanks into the linkname.

118
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.02.27, 21:19:36 »
Hi Dave,

I found the problem and it permited me to find an other minor problem
Could you please get again the updated file and give it a try ?

Latest updates just added
    * Corrected miss-placed instruction making default ClamAV-GUI Freshclam create unwanted backup config file at ClamAV-GUI start time
    * Corrected a possible database update end of process bug
    * Changed how initial ClamAV-GUI start generates default Freshclam config file
    * Corrected a possible not forced ClamD (if running) database reload after database update updated files
    * Corrected ClamD database reload message issued while it should not when no files database updated following a previous freshclam update.

This following first added corrections:
    * Changed RUN= added position into config.sys (to prevent some MPTSTART error at start time if placed as first RUN= statement)
    * Changed REM text when adding Clamd into config.sys
    * Changed process to select ClamD config file. If original Clamd.conf file exist, it is given possibility to use it instead of ClanAV-GUI configured conf file.
    * If original Clamd config file is selected to be used, "epm" opens it to allow user to correct/update his config file (User has to know which parms to add to have clamdscan working)

Thanks and kind regards,
Remy

PS: One more option added
    * ClamD can be auto started from config.sys or startup folder. Entries are created when starting clamd from ClamAV-GUI
       note: When using "startup" folder option, *REM* entries are added into config.sys to inform
 ClamAV-GUI

119
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.02.27, 19:22:35 »
Hi Dave,

About automatic Clamd config file check, I prefered left end-user to make the "choice" because there are several must entries which could differ and may have other value than those defaults I use. This makes the verification more complex...
Using both ClamAV-GUI provided and generated config files makes ClamAV work in most configurations.     

I always use the ClamAVGUI provided freshclam config file due It is needed to have a correct configurated config file to allow database download at start time if none exist. This is to make it directly usable.

About new save freshclam_GUI.conf , this one should be updated only if ClamAV database path has changed... I'll check what happens here and come back....       

120
Article Discussions / Re: ClamAV GUI version 2.1.0
« on: 2011.02.27, 16:24:53 »
Hello Dave,

I corrected the cond config file problem you identified.
(Now, you'll have an option to choice if original Clamd.conf exist but this one may not be configurated when using Clamdscan as scan engine or starting clamd from ClamAV-GUI at first time)

Could you please do a try of this update
http ://remydodin.levillage.org/outils/ ClamAVGUI-2_1_2.wpi

    * Changed RUN= added position into config.sys (to prevent some MPTSTART error at start time if placed as first RUN= statement)
    * Changed REM text when adding Clamd into config.sys
    * Changed process to select ClamD config file. If original Clamd.conf file exist, it is given possibility to use it instead of ClanAV-GUI configured conf file.
    * If original Clamd config file is selected to be used, "epm" opens to allow user to correct/update his config file (User has to know which parms to add to have clamdscan working too)


Please remove blanks into above link.
Kind regards,
Remy


 

Pages: 1 ... 6 7 [8] 9 10 ... 28