Author Topic: RC6 Install on Sylvania G Netbook  (Read 1994 times)

Saijin_Naib

  • Hero Member
  • *****
  • Posts: 1357
  • Birdie Num-Nums
    • View Profile
    • Synperz Domain
RC6 Install on Sylvania G Netbook
« on: 2008.12.08, 02:54:12 »
Hardware:
Processor
1.2GHz VIA C7-M ULV Processor
Chipset
VIA VX700 System Media Processor (integrated North & South Bridge)
Memory
DDR2 SO-DIMM up to 1GB
HDD
30GB (optional 60GB)
LCD
Panel 7" WVGA 800x480 with Touch Panel
Graphics
VIA UniChrome™ Pro II IGP Integrated 3D/2D Graphics with shared memory up to 64MB
Audio
VIA Vinyl VT1708A HD Audio codec
2 speakers
Networking
Realtek RTL8100CL 10/100 Mbps
Wireless LAN
Azure Wave 802.11b/g (USB interface)
I/O 4-in-1 Card Reader
1 DVI-I port
2 Hi-Speed USB2.0 ports
1 RJ45 Ethernet port
Audio jacks
   • 1 Mic-in audio jack
   • 1 Array Microphone jack
   • 1 Headphone (line out) jack


Setup:
RC6
ACPI (Debug)
DASD (DANIS compatibility)
1 USB CD-ROM (boot from USB cdrom enabled)

Will not boot past the boot blob.

Saijin_Naib

  • Hero Member
  • *****
  • Posts: 1357
  • Birdie Num-Nums
    • View Profile
    • Synperz Domain
Re: RC6 Install on Sylvania G Netbook
« Reply #1 on: 2008.12.08, 05:19:18 »
Nvm, seeing as near every file failed the MD5 check on the pre-boot I can hardly expect this to work properly. Attempt two to dl and burn again.

Saijin_Naib

  • Hero Member
  • *****
  • Posts: 1357
  • Birdie Num-Nums
    • View Profile
    • Synperz Domain
Re: RC6 Install on Sylvania G Netbook
« Reply #2 on: 2008.12.08, 07:35:44 »
ACPI On + VGA + DANIS Compat + USB CD Boot yields the best result so far, being that it pauses for minutes on end then gets to the part where it shows the USB CD-ROM driver info then asks for the CD to be inserted.

Saijin_Naib

  • Hero Member
  • *****
  • Posts: 1357
  • Birdie Num-Nums
    • View Profile
    • Synperz Domain