• Welcome to OS2World OLD-STATIC-BACKUP Forum.
 

News:

This is an old OS2World backup forum for reference only. IT IS READ ONLY!!!

If you need help with OS/2 - eComStation visit http://www.os2world.com/forum

Main Menu

New MOBO, USB problem

Started by cyber, 2010.11.20, 23:04:45

Previous topic - Next topic

cyber

I replace moterboard and CPU with newer ones, and everything else work great except USB mouse .  I know that there are 3 type of controllers, UHCI, OHCI and one more, but how to manually install those drivers, putting them in config sys doesn't made my mouse work.  Are there some more dependant files except UHCI, OHCI and one more .sys ??
Any suggestion will be helpfull.   ???

cyber

#1
Forgot to mention that USB keyboard work OK, and mouse is tested on other computer. So it may be that controlor and USB drivers are OK, maybe is amouse make problems ?

DougB

Look for USBCFG at HOBBES. If you have eCS, the WPI version should install the program properly. If you don't have eCS, you need the ZIP version. Run that program, and it will help you set up the USB controllers, and devices, properly.

That gets the USB setup correct. You also need the stuff for the mouse. I would suggest that you probably want to use AMouse (the default in eCS now). http://www.os2site.com/sw/drivers/mouse/amouse280.wpi

cyber

#3
Thanks for the tip with USBCFG, Amouse is already installed, same hard disk unchanged is connected to new motherboard, and same mouse was work on previous system. But looks like USB hardware is to different.

PROBLEM SOLVED: I've forgot that computer may have more than one controler of same type wich USBCFG on very simple way can show.  ::)
thanks Doug !  :D