Corsair Gaming K70 RGB Mk. 2 Mechanical Keyboard

From OS2World.Com Wiki
Jump to navigation Jump to search


Corsair Gaming K70 RGB Mk. 2 Mechanical Keyboard
Corsair K70 Gaming Keyboard.png
Port: USB
Rating: Cell green.gifCell green.gifCell green.gifCell green.gif
Very Good
Driver: USB Keyboard

General Specs

  • Model: K70
  • HardwareID: 1b1c:1b49
  • Release Date: 2013

General Comments

Report by Mark Szkolnicki

It works fine connected through both a KVM switch (tested with a 8 port Belkin) as well as directly connected to a host computer, under ArcaOS.

By default it does not work on ArcaOS or OS/2. It is needed to be enabled the "BIOS Mode" of the keyboard by pressing the "WinLock" key (on the K70 this is located at the top left of the keyboard as a specialty key with a Lock symbol on it) for five seconds, when the keyboard is powered, and then holding down the F1 key (so both keys are pressed) for an additional 5 seconds.

After that release the WINLOCK key - the keyboard LED's go off then back on, and the Scroll Lock LED on the keyboard should blink continuously. After a second, release the F1 key.

Using that procedure the K70 keyboard is now recognized when I boot up ArcaOS, including the colour keyboard display which I had enabled.

Hardware Information

Links