IBM ThinkPad X20 Hardware Report

From OS2World.com Wiki
Jump to: navigation, search

Back to IBM ThinkPad X20.

PCI.EXE

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2018.01.14 of pci.ids using ids2devs version 1.03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 8
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 7190h 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F8000000h..FBFFFFFFh
 New Capabilities List Present:
   AGP Capability, Version 1.0 (AGP 1x and/or 2x support)
     AGP Speed(s) Supported : 1x 2x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     Maximum Command Queue Length : 32 bytes
     AGP Speed Selected : 2x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     Current Command Queue Length : 1 byte

 Bus 0 (PCI), Device Number 1, Device Function 0
 Vendor 8086h Intel Corporation
 Device 7191h 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
 Command 001Fh (I/O Access, Memory Access, BusMaster, Special Cycles,
   MemWrite+Invalidate)
 Status 0220h (Supports 66MHz, Medium Timing)
 Revision 03h, Header Type 01h, Bus Latency Timer 80h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 008Ch (ISA mapping, VGA mapping,
     back-to-back transactions)
   Secondary Bus Status  22A0h (Supports 66MHz, Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 40h
   I/O Port Range Passed to Secondary Bus : 2000h..2FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : F4100000h..F5FFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None

 Bus 0 (PCI), Device Number 7, Device Function 0
 Vendor 8086h Intel Corporation
 Device 7110h 82371AB/EB/MB PIIX4 ISA
 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 02h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Other

 Bus 0 (PCI), Device Number 7, Device Function 1
 Vendor 8086h Intel Corporation
 Device 7111h 82371AB/EB/MB PIIX4 IDE
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1800h..1807h

 Bus 0 (PCI), Device Number 7, Device Function 2
 Vendor 8086h Intel Corporation
 Device 7112h 82371AB/EB/MB PIIX4 USB
 Command 0005h (I/O Access, BusMaster)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 1820h..1833h
 System IRQ 11, INT# D

 Bus 0 (PCI), Device Number 7, Device Function 3
 Vendor 8086h Intel Corporation
 Device 7113h 82371AB/EB/MB PIIX4 ACPI
 Command 0003h (I/O Access, Memory Access)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Other

 Bus 0 (PCI), Device Number 8, Device Function 0
 Vendor 1180h Ricoh Co Ltd
 Device 0476h RL5c476 II
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 80h, Header Type 82h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 01851014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# A
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 2, Subordinate Bus number 4
   CardBus Latency B0h
   Secondary Bus Command 0780h (ints routed by ExCA, write post enable)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 50000000h..50000FFFh
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
       360 mW D0 power consume
       360 mW D0 power dissipate
       320 mW D1 power consume
       320 mW D1 power dissipate
        10 mW D2 power consume
        10 mW D2 power dissipate
        10 mW D3 power consume
        10 mW D3 power dissipate
         0 mW common logic power consume

 Bus 0 (PCI), Device Number 8, Device Function 1
 Vendor 1180h Ricoh Co Ltd
 Device 0476h RL5c476 II
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 80h, Header Type 82h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 01851014h Unknown
 Subsystem Vendor 1014h IBM
 System IRQ 11, INT# B
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 5, Subordinate Bus number 7
   CardBus Latency B0h
   Secondary Bus Command 0780h (ints routed by ExCA, write post enable)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 50100000h..50100FFFh
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
       360 mW D0 power consume
       360 mW D0 power dissipate
       320 mW D1 power consume
       320 mW D1 power dissipate
        10 mW D2 power consume
        10 mW D2 power dissipate
        10 mW D3 power consume
        10 mW D3 power dissipate
         0 mW common logic power consume

 Bus 0 (PCI), Device Number 10, Device Function 0
 Vendor 8086h Intel Corporation
 Device 4220h PRO/Wireless 2200BG [Calexico2] Network Connection
 Command 0016h (Memory Access, BusMaster, MemWrite+Invalidate)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 05h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 03h, Maximum Bus Latency 18h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Other
 Subsystem ID 12F6103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : F4010000h..F4010FFFh
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
      1900 mW D0 power consume
      1900 mW D0 power dissipate
      1900 mW D1 power consume
      1900 mW D1 power dissipate
      1900 mW D2 power consume
      1900 mW D2 power dissipate
       100 mW D3 power consume
       100 mW D3 power dissipate
         0 mW common logic power consume

 Bus 0 (PCI), Device Number 11, Device Function 0
 Vendor 1013h Cirrus Logic
 Device 6005h Crystal CS4281 PCI Audio
 Command 0006h (Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 04h, Maximum Bus Latency 18h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 01831014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : F4011000h..F4011FFFh
 Address 1 is a Memory Address (0-4GiB) : F4000000h..F400FFFFh
 System IRQ 11, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 1002h Advanced Micro Devices, Inc. [AMD/ATI]
 Device 4C4Dh Rage Mobility AGP 2x Series
 Command 0087h (I/O Access, Memory Access, BusMaster, Wait Cycles)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 64h, Header Type 00h, Bus Latency Timer 42h
 Minimum Bus Grant 08h, Maximum Bus Latency 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Display, type VGA
 Subsystem ID 01821014h Unknown
 Subsystem Vendor 1014h IBM
 Address 0 is a Memory Address (0-4GiB) : F5000000h
 Address 1 is an I/O Port : 2000h..20FFh
 Address 2 is a Memory Address (0-4GiB) : F4100000h..F4100FFFh
 System IRQ 11, INT# A
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   AGP Capability, Version 1.0 (AGP 1x and/or 2x support)
     AGP Speed(s) Supported : 1x 2x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     Maximum Command Queue Length : 256 bytes
     AGP Speed Selected : 2x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     Current Command Queue Length : 1 byte
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:DEE0h
 Table Version 1.0 - OK
 Table size 208 bytes - OK
 Table Checksum 1Bh - OK
 PCI Interrupt Router: 82371AB/EB/MB PIIX4 ISA
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 11,14,15 are used by PCI devices
Shared IRQs: IRQ 11 is shared by 6 PCI Devices