Yanling XSK NUC Intel Celeron J3160 Hardware Information

From OS2World.Com Wiki
Jump to navigation Jump to search

Return to Yanling XSK NUC Intel Celeron J3160

PCI.EXE

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2014.03.01 of pci.ids using ids2devs version 1.03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 5
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2280h Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0000h
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation

 Bus 0 (PCI Express), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 22B1h Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : C0000000h
 Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h
 Address 4 is an I/O Port : F000h..F03Fh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 19, Device Function 0
 Vendor 8086h Intel Corporation
 Device 22A3h Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type Serial ATA (AHCI 1.0)
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : F060h..F07Fh
 Address 5 is a Memory Address (0-4GiB) : C1615000h..C16157FFh
 System IRQ 19, INT# A
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 12h)!!

 Bus 0 (PCI Express), Device Number 20, Device Function 0
 Vendor 8086h Intel Corporation
 Device 22B5h Unknown
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI), programming interface 30
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : C1600000h..C160FFFFh
 System IRQ 20, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 26, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2298h Unknown
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class En/Decryption, type Other
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1100000h..C11FFFFFh
 Address 1 is a Memory Address (0-4GiB) : C1000000h..C10FFFFFh
 System IRQ 21, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2284h Unknown
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : C1610000h..C1613FFFh
 System IRQ 22, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 22C8h Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 16, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 0010h ()
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : E000h..EFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : C1500000h..C15FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 7270h
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 1
 Vendor 8086h Intel Corporation
 Device 22CAh Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 17, INT# B
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0010h ()
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : D000h..DFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : C1400000h..C14FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 2
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   4.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 7270h
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 2
 Vendor 8086h Intel Corporation
 Device 22CCh Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 18, INT# C
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
   Secondary Bus Command 0010h ()
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : C000h..CFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : C1300000h..C13FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 3
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Slot Power Limit Value :   6.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 7270h
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 3
 Vendor 8086h Intel Corporation
 Device 22CEh Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 35h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 19, INT# D
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
   Secondary Bus Command 0010h ()
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : B000h..BFFFh (16-bit)
   Memory   Range Passed to Secondary Bus : C1200000h..C12FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (02h)!!
       Maximum Link Width : x1
       Link Port Number   : 4
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Slot Power Limit Value :   8.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 7270h
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 229Ch Unknown
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 35h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 2292h Unknown
 Command 0003h (I/O Access, Memory Access)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 35h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 72708086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1614000h..C161401Fh
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : F040h..F05Fh
 System IRQ 18, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1539h I211 Gigabit Network Connection
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 00008086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1500000h..C151FFFFh
 Address 1 is not present or not configured!
 Address 2 is an I/O Port : E000h..E01Fh
 Address 3 is a Memory Address (0-4GiB) : C1520000h..C1523FFFh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
         0 mW D0 power consume
         0 mW D0 power dissipate
         0 mW D3 power consume
         0 mW D3 power dissipate
         0 mW common logic power consume
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   MSI-X Capability
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 2 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1539h I211 Gigabit Network Connection
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 00008086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1400000h..C141FFFFh
 Address 1 is not present or not configured!
 Address 2 is an I/O Port : D000h..D01Fh
 Address 3 is a Memory Address (0-4GiB) : C1420000h..C1423FFFh
 System IRQ 17, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
         0 mW D0 power consume
         0 mW D0 power dissipate
         0 mW D3 power consume
         0 mW D3 power dissipate
         0 mW common logic power consume
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   MSI-X Capability
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 3 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1539h I211 Gigabit Network Connection
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 00008086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1300000h..C131FFFFh
 Address 1 is not present or not configured!
 Address 2 is an I/O Port : C000h..C01Fh
 Address 3 is a Memory Address (0-4GiB) : C1320000h..C1323FFFh
 System IRQ 18, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
         0 mW D0 power consume
         0 mW D0 power dissipate
         0 mW D3 power consume
         0 mW D3 power dissipate
         0 mW common logic power consume
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   MSI-X Capability
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

 Bus 4 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1539h I211 Gigabit Network Connection
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 64 Bytes (16 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 00008086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : C1200000h..C121FFFFh
 Address 1 is not present or not configured!
 Address 2 is an I/O Port : B000h..B01Fh
 Address 3 is a Memory Address (0-4GiB) : C1220000h..C1223FFFh
 System IRQ 19, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
         0 mW D0 power consume
         0 mW D0 power dissipate
         0 mW D3 power consume
         0 mW D3 power dissipate
         0 mW common logic power consume
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   MSI-X Capability
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Fatal
     Device Status :
       Correctable Error Detected
       Unsupported Request Detected
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:C620h
 Table Version 1.0 - OK
 Table size 208 bytes - OK
 Table Checksum D2h - OK
 PCI Interrupt Router: Unknown
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 16,17,18,19,20,21,22 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 3 PCI Devices
             IRQ 17 is shared by 2 PCI Devices
             IRQ 18 is shared by 3 PCI Devices
             IRQ 19 is shared by 3 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...