Wacom Bamboo Splash CTL-470: Difference between revisions

From OS2World.Com Wiki
Jump to navigation Jump to search
Created page with "This device is working under eComStation as a pointing device. Driver: http://home.hccnet.nl/w.m.brul/usbwacom/index.html Video: https://www.youtube.com/watch?v=974z2320HxM..."
 
No edit summary
 
(10 intermediate revisions by the same user not shown)
Line 1: Line 1:
This device is working under eComStation as a pointing device.  
{{HWBox
|Name=Wacom Bamboo Splash CTL-470
|Image=WacomCTL-470.jpg
|Rating=Good
|Port=USB
|RateImage={{Good}}
|Driver=[http://home.hccnet.nl/w.m.brul/usbwacom/index.html USBECD.SYS]
}}
==General Specs==
* '''Model:''' CTL-470
* '''HardwareID:'''056A:00DD
* '''Port:''' USB


Driver: http://home.hccnet.nl/w.m.brul/usbwacom/index.html
==General Comments==
This device is working under eComStation as a pointing device. Check its [https://www.youtube.com/watch?v=974z2320HxM video at YouTube].


Video: https://www.youtube.com/watch?v=974z2320HxM
On My case the config.sys requires:
DEVICE=X:\OS2\BOOT\XSMOUSE.SYS
DEVICE=X:\ECS\SYSTEM\AMouse\AMOUSE.SYS SMP STYPE=XSMOUSE$
...
DEVICE=X:\OS2\BOOT\USBECD.SYS /D:056A:00D#:01## /N:$BAMBOO$


[[Category:Hardware]]
When the OS loads you need to run a program bamboo.exe to be able to use the device.
 
On 2024 it was tested again with ArcaOS 5.1.0 (UEFI) with AN's USB 12.16 and the device keeps working fine with USBECD.SYS.
 
==Hardware Report==
* [[Wacom Bamboo Splash CTL-470 Hardware Report]]
 
==Links==
 
[[Category:Graphics Tablets]]

Latest revision as of 18:06, 31 October 2024


Wacom Bamboo Splash CTL-470
Port: USB
Rating:
Good
Driver: USBECD.SYS

General Specs

  • Model: CTL-470
  • HardwareID:056A:00DD
  • Port: USB

General Comments

This device is working under eComStation as a pointing device. Check its video at YouTube.

On My case the config.sys requires:

DEVICE=X:\OS2\BOOT\XSMOUSE.SYS
DEVICE=X:\ECS\SYSTEM\AMouse\AMOUSE.SYS SMP STYPE=XSMOUSE$
...
DEVICE=X:\OS2\BOOT\USBECD.SYS /D:056A:00D#:01## /N:$BAMBOO$

When the OS loads you need to run a program bamboo.exe to be able to use the device.

On 2024 it was tested again with ArcaOS 5.1.0 (UEFI) with AN's USB 12.16 and the device keeps working fine with USBECD.SYS.

Hardware Report

Links