Prolifc PL2303 USB 2.0 to COM: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
m Martini moved page Prolifc USB 2.0 to COM to Prolifc PL2303 USB 2.0 to COM without leaving a redirect: Added Chipset |
(No difference)
| |
Revision as of 15:54, 19 July 2023
| Prolifc PL2303 USB 2.0 to COM | |
|---|---|
| Port: | USB |
| Rating: | Very Good |
| Driver: | USBCOM.SYS |
General Specs
- Model: PL2303 USB 2.0 to COM
- HardwareID: 067b:2303
General Comments
The device is recognized by lsusb like "Prolific Technology, Inc. PL2303 Serial Port / Mobile Phone Data Cable"
Testing the Device
I just added to the config.sys
DEVICE=C:\os2\boot\USBCOM.SYS /V
Below USBKBD.SYS
If the device is unplugged I get:
[C:\]mode COM1 SYS0021: The drive is not ready.
If I plug the device I get
[C:\]mode COM1 baud = 9600 parity = NONE databits = 8 stopbits = 1 TO = OFF XON = OFF IDSR = OFF ODSR = OFF OCTS = OFF DTR = ON RTS = ON BUFFER = N/A