APAR PJ08730 - OS/2 2.1: Difference between revisions

From OS2World.Com Wiki
Jump to navigation Jump to search
Created page with " APAR PJ08730 - PROBLEM: OS/2 2.1 hangs or traps after LOGO on DISK 1 when installing from a 3.5"/1.44MB floppy drive. WORKAROUND: Place the files in a different sequence on DISK 1 by making a replacement copy of the disk and using the replacement to install OS/2. MAKE SURE YOU HAVE THE FOLLOWING DISKETTES: One 3.5" (1.44..."
 
No edit summary
Line 1: Line 1:
APAR PJ08730 -


          APAR PJ08730 -
PROBLEM:    OS/2 2.1 hangs or traps after LOGO on DISK 1 when installing from a 3.5"/1.44MB floppy drive.


          PROBLEM:     OS/2 2.1 hangs or traps after LOGO on DISK 1
WORKAROUND: Place the files in a different sequence on DISK 1 by making a replacement copy of the disk and using the replacement to install OS/2.
                      when installing from a 3.5"/1.44MB floppy drive.


          WORKAROUND:  Place the files in a different sequence on DISK 1
                      by making a replacement copy of the disk and using
                      the replacement to install OS/2.


 
MAKE SURE YOU HAVE THE FOLLOWING DISKETTES:
                    MAKE SURE YOU HAVE THE FOLLOWING DISKETTES:


                       One 3.5" (1.44) Replacement Disk 1
                       One 3.5" (1.44) Replacement Disk 1
Line 17: Line 13:




          FOR COMPUTERS WITH ONE 3.5" 1.44MB DRIVE:
'''FOR COMPUTERS WITH ONE 3.5" 1.44MB DRIVE:'''
          --- --------- ---- --- ---- ------ -----


COMPLETE THE FOLLOWING STEPS


                    COMPLETE THE FOLLOWING STEPS




 
1)  Boot with 3.5" DOS diskette
      1)  Boot with 3.5" DOS diskette


           o  Insert DOS Bootable diskette in Drive A:
           o  Insert DOS Bootable diskette in Drive A:
Line 35: Line 29:




      2)  MAKING A REPLACEMENT DISK 1
2)  MAKING A REPLACEMENT DISK 1


           (Insert 3.5" disk in Drive A:)
           (Insert 3.5" disk in Drive A:)
Line 71: Line 65:




      3) MAKE TEMPORARY COPY OF DISK 1
3) MAKE TEMPORARY COPY OF DISK 1


               - Make DISKCOPY of ORIGINAL OS/2 2.1 Disk 1 to the
               - Make DISKCOPY of ORIGINAL OS/2 2.1 Disk 1 to the
Line 104: Line 98:




      4) Insert TEMPORARY disk in Drive A:
4) Insert TEMPORARY disk in Drive A:


           In this step, files on the TEMPORARY DISK 1 (SOURCE) will be
           In this step, files on the TEMPORARY DISK 1 (SOURCE) will be
Line 147: Line 141:




      5) The REPLACEMENT DISK 1, just created should be used to
5) The REPLACEMENT DISK 1, just created should be used to
          install OS/2 2.1.  Please KEEP the original DISK 1 that came
install OS/2 2.1.  Please KEEP the original DISK 1 that came
          with OS/2 2.1 diskettes in a safe place.  However, remember
with OS/2 2.1 diskettes in a safe place.  However, remember
          to write an note to use the REPLACEMENT DISK 1 to install
to write an note to use the REPLACEMENT DISK 1 to install
          OS/2 2.1.  After complete installation, there will not be a need
OS/2 2.1.  After complete installation, there will not be a need
          to keep the TEMPORARY diskette.
to keep the TEMPORARY diskette.
 




          FOR COMPUTERS WITH TWO 3.5" 1.44MB DRIVE:
          --- --------- ---- --- ---- ------ -----


'''FOR COMPUTERS WITH TWO 3.5" 1.44MB DRIVE:'''


      1)  Boot with 3.5" DOS diskette
1)  Boot with 3.5" DOS diskette


           o  Insert DOS Bootable diskette in Drive A:
           o  Insert DOS Bootable diskette in Drive A:
Line 170: Line 162:




      2)  MAKE TEMPORARY COPY OF DISK 1
2)  MAKE TEMPORARY COPY OF DISK 1


                 - Make DISKCOPY of Disk 1
                 - Make DISKCOPY of Disk 1
Line 205: Line 197:




      3)  MAKE REPLACEMENT DISK 1
3)  MAKE REPLACEMENT DISK 1


                 - Insert REPLACEMENT DISK 1 into Drive B:
                 - Insert REPLACEMENT DISK 1 into Drive B:
Line 238: Line 230:
                 -  Press ENTER key
                 -  Press ENTER key


        4). Creating your REPLACEMENT DISK 1
4). Creating your REPLACEMENT DISK 1


                   -  Insert TEMPORARY OS/2 2.1 DISK 1 diskette in Drive A:
                   -  Insert TEMPORARY OS/2 2.1 DISK 1 diskette in Drive A:
Line 265: Line 257:




      5) The REPLACEMENT DISK 1, just created should be used to
5) The REPLACEMENT DISK 1, just created should be used to install OS/2 2.1.  Please KEEP the original DISK 1 that came with OS/2 diskettes in a safe place.  However, suggested you write a note to use the REPLACEMENT DISK 1 to install OS/2 2.1.  After installation is completed, there will not be a need to keep the 3.5" TEMPORARY DISK 1.
          install OS/2 2.1.  Please KEEP the original DISK 1 that came
          with OS/2 diskettes in a safe place.  However, suggested
          you write a note to use the REPLACEMENT DISK 1 to install
          OS/2 2.1.  After installation is completed, there will not be a
          need to keep the 3.5" TEMPORARY DISK 1.

Revision as of 05:55, 15 August 2025

APAR PJ08730 -

PROBLEM: OS/2 2.1 hangs or traps after LOGO on DISK 1 when installing from a 3.5"/1.44MB floppy drive.

WORKAROUND: Place the files in a different sequence on DISK 1 by making a replacement copy of the disk and using the replacement to install OS/2.


MAKE SURE YOU HAVE THE FOLLOWING DISKETTES:

                      One 3.5" (1.44) Replacement Disk 1
                      One 3.5" (1.44) Temporary Disk 1


FOR COMPUTERS WITH ONE 3.5" 1.44MB DRIVE:

COMPLETE THE FOLLOWING STEPS


1) Boot with 3.5" DOS diskette

          o  Insert DOS Bootable diskette in Drive A:
          o  Boot system (Ctrl-Alt-Del or Power On Computer)
          o  Remove DOS diskette from Drive A:


2) MAKING A REPLACEMENT DISK 1

          (Insert 3.5" disk in Drive A:)


                -  At the DOS A> prompt, type:
                             FORMAT A: /V
                -  Press ENTER key
                -  Insert replacement diskette in Drive A:
                -  Press ENTER key
                -  When prompted for volume label, type:
                             DISK 1     (Must have blank space between
                                          DISK and 1)
                -  Press ENTER key
                -  When asked if you want to format another, type:
                              N
                -  Press ENTER key
                -  Remove diskette from Drive A:
                -  Label this diskette REPLACEMENT DISK 1 FOR OS/2 2.1
                -  Insert DOS diskette in Drive A:


3) MAKE TEMPORARY COPY OF DISK 1

              - Make DISKCOPY of ORIGINAL OS/2 2.1 Disk 1 to the
                TEMPORARY DISK 1


                - At DOS A> prompt, type:
                            DISKCOPY A: A:
                -  Press ENTER key
                -  When prompted to insert  SOURCE diskette,
                   insert the Original OS/2 2.1 Disk 1
                -  Press ENTER key
                -  When prompted to insert  TARGET diskette,
                   insert the Temporary Disk 1
                -  Press ENTER key
                -  Inserting of SOURCE(ORIGINAL) & TARGET(TEMPORARY)
                   diskettes may be repeated several times.
                -  When asked to copy another diskette, type
                             N


4) Insert TEMPORARY disk in Drive A:

         In this step, files on the TEMPORARY DISK 1 (SOURCE) will be
         copied to the REPLACEMENT DISK 1 (TARGET)


          -  Erase Bundle from TEMPORARY DISK 1
                 - At DOS A> prompt, type:
                             ERASE BUNDLE
                 - Press ENTER key
                 -  When prompted to insert disk with
                    COMMAND.COM in drive A:
                    Insert DOS diskette in Drive A:
                 -  Press ENTER key
                 -  At the DOS A> prompt, type:
                             XCOPY A:*.* B:  (Note B-drive is a
                                              pseudo drive)
                 -  Press Enter key
                 -  This process will take a lot of time due to the copying
                    of the diskettes.  Many insertions will take place.
                 -  When this above operation has completed,
                    insert original DISK 1 from OS/2 package:
                    OS/2 Disk 1 in Drive A:
                 -  At the DOS A> prompt, type:
                              COPY A:bundle B:
                 -  This time the ORIGINAL OS/2 2.1 DISK 1 is the SOURCE disk
                    and the REPLACEMENT DISK 1 is the TARGET disk.


5) The REPLACEMENT DISK 1, just created should be used to install OS/2 2.1. Please KEEP the original DISK 1 that came with OS/2 2.1 diskettes in a safe place. However, remember to write an note to use the REPLACEMENT DISK 1 to install OS/2 2.1. After complete installation, there will not be a need to keep the TEMPORARY diskette.


FOR COMPUTERS WITH TWO 3.5" 1.44MB DRIVE:

1) Boot with 3.5" DOS diskette

          o  Insert DOS Bootable diskette in Drive A:
          o  Boot system (Cntl-Alt-Del or Power on Computer)
          o  Remove DOS diskette from Drive A:


2) MAKE TEMPORARY COPY OF DISK 1

               - Make DISKCOPY of Disk 1
                 -  Insert Original OS/2 2.1 Disk 1 in Drive A:
                 -  Insert TEMPORARY COPY of DISK 1 in Drive B:
                 -  At the DOS A> prompt, type:
                              DISKCOPY A: B:
                 -  Press ENTER key
                 -  Press Enter Key for any prompt messages for
                    SOURCE & TARGET diskettes.
                 -  When asked to copy another diskette, type:
                              N
                 -  Press ENTER key
                 -  Remove TEMPORARY DISK 1 from Drive B:
                    Label it TEMPORARY COPY of OS/2 2.1 DISK 1
                 -  When prompted to insert disk with
                    COMMAND.COM in drive A:
                    Insert DOS diskette in Drive A:
                 -  Press ENTER key


3) MAKE REPLACEMENT DISK 1

                - Insert REPLACEMENT DISK 1 into Drive B:
                -  At DOS A> prompt, type:
                             FORMAT B: /V
                -  Press ENTER key
                -  When prompted for volume label, type:
                             DISK 1     (Must have blank space between
                                         DISK and 1)
                -  Press ENTER key
                -  When asked if you want to format another, type:
                              N
                -  Press ENTER key
                -  Label formatted diskette REPLACEMENT DISK 1 for OS/2 2.1
                -  Leave REPLACEMENT DISK 1 diskette in Drive B:
                -  When prompted to insert disk with COMMAND.COM in drive A:
                   Insert DOS diskette in Drive A:
                -  Press ENTER key

4). Creating your REPLACEMENT DISK 1

                 -  Insert TEMPORARY OS/2 2.1 DISK 1 diskette in Drive A:
                 -  At the DOS A> prompt, type:
                              Erase BUNDLE
                 -  Press ENTER key
                  - At the DOS A> prompt, type:
                              Copy A:*.* B:
                 -  Press ENTER key
                 -  Insert Original OS/2 DISK 1 in Drive A:
                 -  At the DOS A> prompt, type:
                              Copy A:bundle B:
                 -  Press ENTER key
                 -  Remove Diskettes from Drive A: & B:


5) The REPLACEMENT DISK 1, just created should be used to install OS/2 2.1. Please KEEP the original DISK 1 that came with OS/2 diskettes in a safe place. However, suggested you write a note to use the REPLACEMENT DISK 1 to install OS/2 2.1. After installation is completed, there will not be a need to keep the 3.5" TEMPORARY DISK 1.