Installing OS/2 Warp, Internal CDROM Drive Connected to a Soundcard Directly (Not a Separate Controller Card): Difference between revisions

From OS2World.Com Wiki
Jump to navigation Jump to search
Created page with "=== INSTALLING OS/2 WARP, INTERNAL CDROM DRIVE CONNECTED TO A SOUNDCARD DIRECTLY (NOT A SEPARATE CONTROLLER CARD) === Last updated: 27 Dec 1994 ---- === DESCRIPTION OF SYM..."
(No difference)

Revision as of 01:39, 30 May 2016

INSTALLING OS/2 WARP, INTERNAL CDROM DRIVE CONNECTED TO A SOUNDCARD DIRECTLY (NOT A SEPARATE CONTROLLER CARD)

Last updated: 27 Dec 1994


DESCRIPTION OF SYMPTOMS

Not recognizing cdrom. OS2CDROM.DMD not found.

RESOLUTION

This is a hardware related problem. User needs to do the following:

On the back of the cdrom drive is a jumper which controls the bus device number. OS/2 install requires it to be on 0 (zero).

Most sound board manufacturers leave it at the factory default of 1. If it is anything other than 0, the install disk #1 will not load the driver " OS2CDROM.DMD " and will stop installation with a red screen saying it can't find the cdrom.


Source

[[1]]