HP T5740 Thin Client Hardware Report: Difference between revisions
Jump to navigation
Jump to search
m →ACPI |
No edit summary |
||
| Line 666: | Line 666: | ||
</PRE> | </PRE> | ||
[[Category: | [[Category:Thin Clients]] | ||
Latest revision as of 17:31, 4 November 2024
Back to HP T5740 Thin Client.
PCI.EXE
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03"
PCI BIOS Version 2.10 found!
Number of PCI Busses : 5
PCI Characteristics : Config Mechanism 1
Searching for PCI Devices using the OEMHLP$ driver
Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 2A40h Mobile 4 Series Chipset Memory Controller Hub
Command 0006h (Memory Access, BusMaster)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
Received Master Abort, Fast Timing)
Revision 09h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 2A408086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 2A42h Mobile 4 Series Chipset Integrated Graphics Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 09h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type VGA
Subsystem ID 2A428086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (64-bit) : FE400000h
Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h
Address 4 is an I/O Port : C080h
System IRQ 16, INT# A
New Capabilities List Present:
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 2, Device Function 1
Vendor 8086h Intel Corporation
Device 2A43h Mobile 4 Series Chipset Integrated Graphics Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 09h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type Other
Subsystem ID 2A428086h Unknown
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (64-bit) : FE900000h
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 26, Device Function 0
Vendor 8086h Intel Corporation
Device 2937h 82801I (ICH9 Family) USB UHCI Controller #4
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29378086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : C800h..C81Fh
System IRQ 16, INT# A
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 26, Device Function 1
Vendor 8086h Intel Corporation
Device 2938h 82801I (ICH9 Family) USB UHCI Controller #5
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29388086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : C480h..C49Fh
System IRQ 21, INT# B
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 26, Device Function 2
Vendor 8086h Intel Corporation
Device 2939h 82801I (ICH9 Family) USB UHCI Controller #6
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29398086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : C400h..C41Fh
System IRQ 19, INT# D
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 26, Device Function 7
Vendor 8086h Intel Corporation
Device 293Ch 82801I (ICH9 Family) USB2 EHCI Controller #2
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 293C8086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (0-4GiB) : FEAFF400h..FEAFF7FFh
System IRQ 18, INT# C
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 27, Device Function 0
Vendor 8086h Intel Corporation
Device 293Eh 82801I (ICH9 Family) HD Audio Controller
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Multimedia, type Unknown!
Subsystem ID 293E8086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (64-bit) : FEAF8000h..FEAFBFFFh
System IRQ 22, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 55 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Root Complex Integrated Endpoint Device
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : Unknown (00h)!!
Maximum Link Width : xReserved
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : Unknown (00)!!
Current Link Width : x0
Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device 2940h 82801I (ICH9 Family) PCI Express Port 1
Command 0504h (Bus Access Disabled!!, BusMaster, System Errors,
Interrupt Disable)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 29408086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
System IRQ 17, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x4
Link Port Number : 1
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x0
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 2.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 8086h
SSID : 2940h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 4
Vendor 8086h Intel Corporation
Device 2948h 82801I (ICH9 Family) PCI Express Port 5
Command 0504h (Bus Access Disabled!!, BusMaster, System Errors,
Interrupt Disable)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 29488086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
System IRQ 17, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 5
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x0
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 10.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 8086h
SSID : 2948h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 5
Vendor 8086h Intel Corporation
Device 294Ah 82801I (ICH9 Family) PCI Express Port 6
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 03h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 294A8086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
System IRQ 16, INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FEB00000h..FEBFFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 6
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 12.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 8086h
SSID : 294Ah
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device 2934h 82801I (ICH9 Family) USB UHCI Controller #1
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29348086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : D000h..D01Fh
System IRQ 23, INT# A
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 29, Device Function 1
Vendor 8086h Intel Corporation
Device 2935h 82801I (ICH9 Family) USB UHCI Controller #2
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29358086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : CC00h..CC1Fh
System IRQ 19, INT# B
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 29, Device Function 2
Vendor 8086h Intel Corporation
Device 2936h 82801I (ICH9 Family) USB UHCI Controller #3
Command 0005h (I/O Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 29368086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : C880h..C89Fh
System IRQ 18, INT# C
New Capabilities List Present:
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 29, Device Function 7
Vendor 8086h Intel Corporation
Device 293Ah 82801I (ICH9 Family) USB2 EHCI Controller #1
Command 0006h (Memory Access, BusMaster)
Status 0298h (Signalled Interrupt, Has Capabilities List,
Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 293A8086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (0-4GiB) : FEAFF800h..FEAFFBFFh
System IRQ 23, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device 2448h 82801 Mobile PCI Bridge
Command 0104h (Bus Access Disabled!!, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 93h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
Subsystem ID 24488086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
Received Master Abort, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 8086h
SSID : 2448h
Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device 2919h ICH9M LPC Interface Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 03h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 29198086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device 2928h 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 29288086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is an I/O Port : EC00h
Address 1 is an I/O Port : E880h
Address 2 is an I/O Port : E800h..E807h
Address 3 is an I/O Port : E480h
Address 4 is an I/O Port : E400h
Address 5 is an I/O Port : E080h..E08Fh
System IRQ 19, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Unknown Capability (Code 13h)!!
Bus 0 (PCI Express), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 2930h 82801I (ICH9 Family) SMBus Controller
Command 0003h (I/O Access, Memory Access)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 29308086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is a Memory Address (64-bit) : FEAFFC00h
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 0400h
System IRQ 18, INT# C
Bus 0 (PCI Express), Device Number 31, Device Function 5
Vendor 8086h Intel Corporation
Device 292Dh 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 03h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 292D8086h Unknown (Generic ID)
Subsystem Vendor 8086h Intel Corporation
Address 0 is an I/O Port : DC00h..DC07h
Address 1 is an I/O Port : D880h
Address 2 is an I/O Port : D800h
Address 3 is an I/O Port : D480h
Address 4 is an I/O Port : D400h..D407h
Address 5 is an I/O Port : D080h..D08Fh
System IRQ 19, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Unknown Capability (Code 13h)!!
Bus 4 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 1692h NetLink BCM57780 Gigabit Ethernet PCIe
Command 0006h (Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 32 Bytes (8 DWords)
PCI Class Network, type Ethernet
Subsystem ID 969214E4h Unknown
Subsystem Vendor 14E4h Broadcom Inc. and subsidiaries
Address 0 is a Memory Address (64-bit) : FEBF0000h..FEBFFFFFh
System IRQ 17, INT# A
Expansion ROM of 64 KiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
800 mW D0 power consume
800 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
6400 mW D3 power consume
6400 mW D3 power dissipate
0 mW common logic power consume
Vendor-Dependant Capability
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 2
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:5F50h
Table Version 1.0 - OK
Table size 224 bytes - OK
Table Checksum 2Eh - OK
PCI Interrupt Router: ICH9M LPC Interface Controller
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be OK.
IRQ Summary: IRQs 16,17,18,19,21,22,23 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 3 PCI Devices
IRQ 17 is shared by 3 PCI Devices
IRQ 18 is shared by 3 PCI Devices
IRQ 19 is shared by 4 PCI Devices
IRQ 23 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...
ACPI
The version of ACPI.PSD that is installed is 3.23.16 The system is operating in Symmetric mode (Mode 2) The kernel is 14.203_SMP The retail PSD is installed Number of interrupts available: 60 IRQ 00 count 14729 IRQ 01 count 792 IRQ 08 count 420073 IRQ 09 count 346 IRQ 18 count 10922 IRQ 19 count 102796 MSI 22 count 706 IRQ 23 count 12 MSI 58 count 6873 ========== CPU0 ================== ACPI name [P001] IPIGenCount = 74650 IPICount = 74839 HaltCount = 0 IPIPsdCount = 0 IdleCount = 676212 BusyCount = 122044 ========== CPU1 ================== ACPI name [P002] IPIGenCount = 74839 IPICount = 74650 HaltCount = 28 IPIPsdCount = 1 IdleCount = 321490 BusyCount = 321489 This system does not support CPU Performance Control via ACPI. This system does not support CPU Throttling. Thermal information: No Thermal information is available for this computer No AC status is available for this computer No Battery information is available for this computer Power Manager is Enabled