Installing RAMFSOS2

From OS2World.Com Wiki
Revision as of 23:49, 29 January 2016 by Martini (talk | contribs)
Jump to navigation Jump to search


USB Flahs / FAT32 / From Windows 10

I had been trying to install RAMFSOS2 to boot from a 4GB USB Flash drive and doing this from Windows 10 (64bits)

  • Check that the USB Flash drive is formatted on FAT32
  • Unzip all the contents of the RAMFSOS2 zip to the root of the Flash Drive.

Now it is the turn of the FreeInst tool to modify the USB Flash booting.

  • Go to the \Tools\FreeInst directory
  • Run "fi-w32.exe"
  • Select Y if you are sure to continue

  • Select the drive where you are going to install FreeLdr


  • Select 1) to install New MBR for FreeLDR on a Partition

  • It will ask for the drive number. You USB Flash Drive can be 2 or 3 depending on how many HDDs your machine has.

  • It will ask you on which partition to install it. If you only have one partition (primary) on your USB Flash you can select #1.

It will give you some message like:

  • Now on the on Main Menu select "2) Install FreeLDR on a Partition"