Lenovo Miix 510-12ISK

- Status: No Install Possible
- Reason: Can not create volume
Devices
Component | Name | HardwareID | Status | Driver |
---|---|---|---|---|
Processor | ![]() |
ACPI- Boots | ||
SATA | Intel Sunrise Point-LP SATA Controller [AHCI mode] | 8086:9D03 | ![]() |
OS2AHCI |
HDD | Samsung NVMe SSD Controller SM951/PM951 | 144D:A802 | ![]() |
Not Working |
Audio | -- | -- | ![]() |
Not Tested - UNIAUD |
Video | Intel Skylake GT2 [HD Graphics 520] | 8086:1916 | ![]() |
Panorama |
Wireless Network | Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter5 | 168C:042h | ![]() |
Not Working |
Wireless Bluetooth | -- | -- | ![]() |
Not Supported |
USB 3.0 | Intel Sunrise Point-LP USB 3.0 xHCI Controller | 8086:9D2F | ![]() |
|
WebCam | -- | -- | ![]() |
Not Tested |
UEFI Bios | ![]() |
Not Supported. Must boot in Legacy mode. | ||
SD/MMC slot | -- | -- | ![]() |
Not Tested |
Touch Screen | -- | -- | ![]() |
Not Tested |
Digitizer Pen | -- | -- | ![]() |
Not Tested |
Install Information
- Report by Martin Iturbide
- To access selective boot device (or access the BIOS) hold the "Volume +" button and "power On" the Lenovo Miix 510 tablet.
- Access the BIOS, check that UEFI is enabled and that Secure Boot is Disabled.
- Reboot with "Volume +" button and "power On", or F12 also works and select the EFI USB Flash on the boot list.
- Select to install with default values
- Follow the normal ArcaOS install procedure for a EFI System partition system.
For the moment it does not find a HDD device. Checking the kind of storage device it has.