Natcomp @note (2001) Hardware Report

From OS2World.Com Wiki
Revision as of 14:08, 27 November 2019 by Martini (talk | contribs) (Created page with " ==PCI.EXE== <PRE> Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. Loaded Vendor Data : "This is version ha_merged, 23 Jan 2018 11:05:53" PCI B...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

PCI.EXE

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version ha_merged, 23 Jan 2018 11:05:53"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 2
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI), Device Number 0, Device Function 0
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 0630h 630 Host
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 2210h (Has Capabilities List, Received Master Abort, Medium Timing)
 Revision 11h, Header Type 80h, Bus Latency Timer 40h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Address 0 is a Memory Address (0-4GiB) : E0000000h..E7FFFFFFh
 New Capabilities List Present:
   AGP Capability, Version 2.0 (AGP 4x and below support)
     AGP Speed(s) Supported : 1x 2x 4x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     Maximum Command Queue Length : 32 bytes
     AGP Speed Selected : 4x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     Current Command Queue Length : 1 byte

 Bus 0 (PCI), Device Number 0, Device Function 1
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 5513h 5513 IDE Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0000h
 Revision D0h, Header Type 80h, Bus Latency Timer 80h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is at I/O Port 01F0h and IRQ 14
   Secondary Channel is at I/O Port 0170h and IRQ 15
 Subsystem ID 71201071h Unknown
 Subsystem Vendor 1071h Mitac
 Address 0 is an I/O Port : 01F0h..01F7h
 Address 1 is an I/O Port : 03F4h
 Address 2 is an I/O Port : 0170h..0177h
 Address 3 is an I/O Port : 0374h
 Address 4 is an I/O Port : 1C80h..1C87h
 System IRQ (disabled), INT# A

 Bus 0 (PCI), Device Number 1, Device Function 0
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 0008h SiS85C503/5513 (LPC Bridge)
 Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
 Status 0200h (Medium Timing)
 Revision 00h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA

 Bus 0 (PCI), Device Number 1, Device Function 1
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 0900h SiS900 PCI Fast Ethernet
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 80h, Header Type 00h, Bus Latency Timer ADh
 Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 71201071h SiS900 10/100 Ethernet Adapter
 Subsystem Vendor 1071h Mitac
 Address 0 is an I/O Port : 1000h..10FFh
 Address 1 is a Memory Address (0-4GiB) : E8000000h..E8000FFFh
 System IRQ 11, INT# C
 Expansion ROM of 128 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
     PME# signalling is currently enabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 1, Device Function 2
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 7001h USB 1.1 Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 8280h (Supports Back-To-Back Trans., Detected Parity Error,
   Medium Timing)
 Revision 07h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 00h, Maximum Bus Latency 50h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Serial, type USB (OHCI)
 Subsystem ID 70011039h SiS5597/8 Universal Serial Bus Controller (Generic ID)
 Subsystem Vendor 1039h Silicon Integrated Systems [SiS]
 Address 0 is a Memory Address (0-4GiB) : E8001000h..E8001FFFh
 System IRQ 5, INT# D

 Bus 0 (PCI), Device Number 1, Device Function 4
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 7018h SiS PCI Audio Accelerator
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 40h
 Minimum Bus Grant 02h, Maximum Bus Latency 18h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Audio
 Subsystem ID 71201071h SiS 7018 Audio Driver
 Subsystem Vendor 1071h Mitac
 Address 0 is an I/O Port : 1400h..14FFh
 Address 1 is a Memory Address (0-4GiB) : E8002000h..E8002FFFh
 System IRQ 9, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D2, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 1, Device Function 6
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 7013h AC'97 Modem Controller
 Command 0001h (I/O Access)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision A0h, Header Type 00h, Bus Latency Timer ADh
 Minimum Bus Grant 34h, Maximum Bus Latency 0Bh
 Self test 00h (Self test not supported)
 PCI Class Simple Communication, type Hayes Compatible Modem
 Subsystem ID 71201071h Unknown
 Subsystem Vendor 1071h Mitac
 Address 0 is an I/O Port : 1800h..18FFh
 Address 1 is an I/O Port : 1C00h..1C7Fh
 System IRQ 9, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 2, Device Function 0
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 0001h AGP Port (virtual PCI-to-PCI bridge)
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0000h
 Revision 00h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : 9000h..9FFFh (16-bit)
   Memory   Range Passed to Secondary Bus : E8100000h..E81FFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : F0000000h..F7FFFFFFh

 Bus 0 (PCI), Device Number 8, Device Function 0
 Vendor 104Ch Texas Instruments
 Device AC1Ch PCI1225
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 01h, Header Type 82h, Bus Latency Timer 20h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 71201071h Unknown
 Subsystem Vendor 1071h Mitac
 System IRQ (disabled), INT# A
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 0, Subordinate Bus number 0
   CardBus Latency 00h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 10000000h
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI), Device Number 8, Device Function 1
 Vendor 104Ch Texas Instruments
 Device AC1Ch PCI1225
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 8210h (Has Capabilities List, Detected Parity Error, Medium Timing)
 Revision 01h, Header Type 82h, Bus Latency Timer 20h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to Cardbus
 Subsystem ID 71201071h Unknown
 Subsystem Vendor 1071h Mitac
 System IRQ (disabled), INT# A
 CardBus Bridge Information:
   PCI Bus Number 0, CardBus Bus Number 0, Subordinate Bus number 0
   CardBus Latency 00h
   Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)
   Secondary Bus Status  0200h (Medium Timing)
   Socket/ExCa Base Memory Address : 30000000h
   Memory   Range 0 : None
   Memory   Range 1 : None
   I/O Port Range 0 : None
   I/O Port Range 1 : None
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Supports PME# signalling from mode(s) D0, D1, D2, D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 1 (AGP), Device Number 0, Device Function 0
 Vendor 1039h Silicon Integrated Systems [SiS]
 Device 6300h 630/730 PCI/AGP VGA Display Adapter
 Command 0003h (I/O Access, Memory Access)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 11h, Header Type 00h, Bus Latency Timer 00h
 Self test 80h (Self test supported: Completion code 0h - OK)
 PCI Class Display, type VGA
 Subsystem ID 71201071h SiS 630
 Subsystem Vendor 1071h Mitac
 Address 0 is a Memory Address (0-4GiB, Prefetchable) : F0000000h..F7FFFFFFh
 Address 1 is a Memory Address (0-4GiB) : E8100000h..E811FFFFh
 Address 2 is an I/O Port : 9000h..907Fh
 New Capabilities List Present:
   Power Management Capability, Version 1.0
     Supports low power State D1
     Supports low power State D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   AGP Capability, Version 2.0 (AGP 4x and below support)
     AGP Speed(s) Supported : 1x 2x 4x 
     FW Transfers Supported : No
     >4GiB Address Space Supported : No
     Sideband Addressing Supported : Yes
     Maximum Command Queue Length : 16 bytes
     AGP Speed Selected : 4x 
     FW Transfers Enabled : No
     >4GiB Address Space Enabled : No
     AGP Enabled : Yes
     Sideband Addressing Enabled : Yes
     Current Command Queue Length : 1 byte

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:DF70h
 Table Version 1.0 - OK
 Table size 112 bytes - OK
 Table Checksum 9Bh - OK
 PCI Interrupt Router: SiS85C503/5513 (LPC Bridge)
 IRQ's dedicated to PCI : None
  Error: connectivity mismatches for link value 41:
    Bus=0 Device= 1 Pin=INTA# Map=9 
    Bus=0 Device= 2 Pin=INTA# Map=3,4,5,6,7,9,10,11,12,14,15 
  Error: connectivity mismatches for link value 42:
    Bus=0 Device= 1 Pin=INTB# Map=9 
    Bus=0 Device= 2 Pin=INTB# Map=3,4,5,6,7,9,10,11,12,14,15 
  Error: connectivity mismatches for link value 41:
    Bus=0 Device= 1 Pin=INTA# Map=9 
    Bus=0 Device= 0 Pin=INTA# Map=3,4,5,6,7,9,10,11,12,14,15 
 The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 5,9,11,14,15 are used by PCI devices
Shared IRQs: IRQ 9 is shared by 2 PCI Devices