Lenovo Miix 510-12ISK

- Status: No Install Possible
- Reason: Can not create volume
Devices
| Component | Name | HardwareID | Status | Driver |
|---|---|---|---|---|
| Processor | ACPI- Boots | |||
| SATA | Intel Sunrise Point-LP SATA Controller [AHCI mode] | 8086:9D03 | OS2AHCI | |
| HDD | Samsung NVMe SSD Controller SM951/PM951 | 144D:A802 | Not Working | |
| Audio | -- | -- | Not Tested - UNIAUD | |
| Video | Intel Skylake GT2 [HD Graphics 520] | 8086:1916 | Panorama | |
| Wireless Network | Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter5 | 168C:042h | Not Working | |
| Wireless Bluetooth | -- | -- | Not Supported | |
| USB 3.0 | Intel Sunrise Point-LP USB 3.0 xHCI Controller | 8086:9D2F | ||
| WebCam | -- | -- | Not Tested | |
| UEFI Bios | Not Supported. Must boot in Legacy mode. | |||
| SD/MMC slot | -- | -- | Not Tested | |
| Touch Screen | -- | -- | Not Tested | |
| Digitizer Pen | -- | -- | Not Tested |
Install Information
- Report by Martin Iturbide
- I tried with this machine a Windows 10 and ArcaOS 5.1.0 dual boot. This is why I choose to keep the BIOS in UEFI mode.
- To access selective boot device (or access the BIOS) hold the "Volume +" button and "power On" the Lenovo Miix 510 tablet.
- Access the BIOS, check that UEFI is enabled and that Secure Boot is Disabled.
- Reboot with "Volume +" button and "power On", or F12 also works and select the EFI USB Flash on the boot list.
- Select to install with default values
- Follow the normal ArcaOS install procedure for an EFI System partition system.
- With the CSM compatibility mode I got several problems at start. First the bundled keyboard/trackpad didn't work, and lately it gave me problems to recognize the volume on where to install ArcaOS. That is why I only used the UEFI mode.