HP ProDesk 400 G3 SFF Hardware Report
Jump to navigation
Jump to search
Return to HP ProDesk 400 G3 SFF.
PCI Report
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03"
PCI BIOS Version 2.10 found!
Number of PCI Busses : 3
PCI Characteristics : Config Mechanism 1
Searching for PCI Devices using the OEMHLP$ driver
Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 191Fh Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
Command 0106h (Memory Access, BusMaster, System Errors)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
Received Master Abort, Fast Timing)
Revision 07h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 1912h HD Graphics 530
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 06h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type VGA
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E0000000h
Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h
Address 4 is an I/O Port : 4000h
System IRQ 16, INT# A
New Capabilities List Present:
Vendor-Dependant Capability
PCI Express Capability, Version 2
Device/Port Type :
Root Complex Integrated Endpoint Device
Unsupported Request Severity is Non-Fatal
Device Status :
Link Capabilities :
Maximum Link speed : Unknown (00h)!!
Maximum Link Width : xReserved
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : Unknown (00)!!
Current Link Width : x0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 20, Device Function 0
Vendor 8086h Intel Corporation
Device A12Fh 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 31h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI), programming interface 30
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E1200000h..E120FFFFh
System IRQ 58, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
Bus 0 (PCI Express), Device Number 20, Device Function 2
Vendor 8086h Intel Corporation
Device A131h 100 Series/C230 Series Chipset Family Thermal Subsystem
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 31h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Data Aquisition & Signal Processing, type Other
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E122A000h
System IRQ 18, INT# C
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Bus 0 (PCI Express), Device Number 22, Device Function 0
Vendor 8086h Intel Corporation
Device A13Ah 100 Series/C230 Series Chipset Family MEI Controller #1
Command 0002h (Memory Access)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 31h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Simple Communication, type Other
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E122B000h
System IRQ 16, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
Bus 0 (PCI Express), Device Number 23, Device Function 0
Vendor 8086h Intel Corporation
Device A102h Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 02B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 31h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type Serial ATA (AHCI 1.0)
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (0-4GiB) : E1228000h..E1229FFFh
Address 1 is a Memory Address (0-4GiB) : E122E000h..E122E0FFh
Address 2 is an I/O Port : 4080h..4087h
Address 3 is an I/O Port : 4088h..408Bh
Address 4 is an I/O Port : 4060h..407Fh
Address 5 is a Memory Address (0-4GiB) : E122C000h..E122C7FFh
System IRQ 16, INT# A
New Capabilities List Present:
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Unknown Capability (Code 12h)!!
Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device A114h 100 Series/C230 Series Chipset Family PCI Express Root Port #5
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F1h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
System IRQ 16, INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit)
Memory Range Passed to Secondary Bus : E1100000h..E11FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 2
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : Unknown (02h)!!
Maximum Link Width : x1
Link Port Number : 5
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Slot Power Limit Value : 10.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 103Ch
SSID : 8062h
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 5
Vendor 8086h Intel Corporation
Device A115h 100 Series/C230 Series Chipset Family PCI Express Root Port #6
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F1h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
System IRQ 17, INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : E1000000h..E10FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 2
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : Unknown (02h)!!
Maximum Link Width : x1
Link Port Number : 6
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Slot Power Limit Value : 12.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 103Ch
SSID : 8062h
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device A143h H110 Chipset LPC/eSPI Controller
Command 0507h (I/O Access, Memory Access, BusMaster, System Errors,
Interrupt Disable)
Status 0000h
Revision 31h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Bus 0 (PCI Express), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device A121h 100 Series/C230 Series Chipset Family Power Management Controller
Command 0006h (Memory Access, BusMaster)
Status 0000h
Revision 31h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Memory, type Other
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (0-4GiB) : E1224000h
Bus 0 (PCI Express), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device A170h 100 Series/C230 Series Chipset Family HD Audio Controller
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 31h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Unknown!
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E1220000h..E1223FFFh
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is a Memory Address (64-bit) : E1210000h..E121FFFFh
System IRQ 16, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 55 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
Bus 0 (PCI Express), Device Number 31, Device Function 4
Vendor 8086h Intel Corporation
Device A123h 100 Series/C230 Series Chipset Family SMBus
Command 0103h (I/O Access, Memory Access, System Errors)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 31h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E122D000h
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : EFA0h
System IRQ 16, INT# A
Bus 1 (PCI Express), Device Number 0, Device Function 0
Vendor 10ECh Realtek Semiconductor Co., Ltd.
Device 8168h RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 15h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Network, type Ethernet
Subsystem ID 8062103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is an I/O Port : 3000h..30FFh
Address 1 is not present or not configured!
Address 2 is a Memory Address (64-bit) : E1104000h..E1104FFFh
Address 4 is a Memory Address (64-bit) : E1100000h..E1103FFFh
System IRQ 16, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.2
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 2
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Fatal
Device Status :
Correctable Error Detected
Unsupported Request Detected
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
MSI-X Capability
Bus 2 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 4359h BCM43228 802.11a/b/g/n
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Network, type Other
Subsystem ID 8088103Ch Unknown
Subsystem Vendor 103Ch Hewlett-Packard Company
Address 0 is a Memory Address (64-bit) : E1000000h
System IRQ 17, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.2
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
0 mW D0 power consume
0 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
0 mW D3 power consume
0 mW D3 power dissipate
0 mW common logic power consume
Vendor-Dependant Capability
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
Correctable Error Detected
Unsupported Request Detected
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:7E00h
Table Version 1.0 - OK
Table size 160 bytes - OK
Table Checksum DEh - OK
PCI Interrupt Router: H110 Chipset LPC/eSPI Controller
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be OK.
IRQ Summary: IRQs 16,17,18,58 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 7 PCI Devices
IRQ 17 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...