MSI B250M PRO-VDH (MS-7A70) Hardware Report
Jump to navigation
Jump to search
Back to MSI B250M PRO-VDH (MS-7A70)-
PCI.EXE
2h Micro-Star International Co., Ltd. [MSI] Address 0 is an I/O Port : E000h..E0FFh Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit) : DF004000h..DF004FFFh Address 4 is a Memory Address (64-bit) : DF000000h..DF003FFFh System IRQ 18, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is enabled MSI function can generate 64-bit addresses PCI Express Capability, Version 2 Device/Port Type : PCI Express Endpoint Device Device Capabilities : Unsupported Request Severity is Fatal Device Status : Correctable Error Detected Unsupported Request Detected AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 MSI-X Capability ROM PCI IRQ routing table Tests.... ROM IRQ routing table found at F000h:C620h Table Version 1.0 - OK Table size 176 bytes - OK Table Checksum 29h - OK PCI Interrupt Router: 200 Series PCH LPC Controller (B250) IRQ's dedicated to PCI : None The ROM PCI IRQ routing table appears to be OK. IRQ Summary: IRQs 16,17,18,58 are used by PCI devices Shared IRQs: IRQ 16 is shared by 9 PCI Devices IRQ 18 is shared by 4 PCI Devices IRQ control is currently managed by the system APIC controller - IRQ info is not actual hardware settings...