WarpTips: Panasonic 563 CD Drives: Difference between revisions

From OS2World.Com Wiki
Jump to navigation Jump to search
(Created page with "; TITLE: 950203 THREE IDE 563 PANASONIC CDROM DRIVES WORKING UNDER OS/2 WARP. ; SYMPTOMS: Multiple CDROMs connected to the same IDE adapter (SB16 card) are not recognize....")
 
mNo edit summary
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
; TITLE: 950203 THREE IDE 563 PANASONIC CDROM DRIVES WORKING UNDER OS/2 WARP.
==TITLE: 950203 THREE IDE 563 PANASONIC CDROM DRIVES WORKING UNDER OS/2 WARP.==
;SYMPTOMS:Multiple CD-ROMs connected to the same IDE adapter (SB16 card) are not recognized.
; SYMPTOMS:
;RESOLUTION:Creative Labs has a new driver on their BBS called CD_OS2.EXE.
Multiple CDROMs connected to the same IDE adapter (SB16 card) are not recognize.
; RESOLUTION:
Creative Labs has a new driver on their BBS called CD_OS2.EXE.


BBS number is (405) 742-6660.
BBS number is (405) 742-6660.
Line 12: Line 8:


Note that at this point, multiple 563 Panasonic IDE CDROM drives are not supported.
Note that at this point, multiple 563 Panasonic IDE CDROM drives are not supported.
==TITLE: 941122 INSTALLING OS/2 WARP, INTERNAL CDROM DRIVE CONNECTED TO A SOUNDCARD DIRECTLY (NOT A SEPARATE CONTROLLER CARD).==
;DESCRIPTION OF SYMPTOMS: Not recognizing cdrom. OS2CDROM.DMD not found.
:RESOLUTION:This is a hardware related problem.  User needs to do the following:
On the back of the cdrom drive is a jumper which controls the bus device number. OS/2 install requires it to be on 0 (zero).
Most sound board manufacturers leave it at the factory default of 1. If it is anything other than 0, the install disk #1 will not load the driver "OS2CDROM.DMD" and will stop installation with a red screen saying it can't find the cdrom.
[[Category:FAQ]]

Latest revision as of 01:50, 8 December 2022

TITLE: 950203 THREE IDE 563 PANASONIC CDROM DRIVES WORKING UNDER OS/2 WARP.

SYMPTOMS
Multiple CD-ROMs connected to the same IDE adapter (SB16 card) are not recognized.
RESOLUTION
Creative Labs has a new driver on their BBS called CD_OS2.EXE.

BBS number is (405) 742-6660.

Contact Creative Labs for more information.

Note that at this point, multiple 563 Panasonic IDE CDROM drives are not supported.

TITLE: 941122 INSTALLING OS/2 WARP, INTERNAL CDROM DRIVE CONNECTED TO A SOUNDCARD DIRECTLY (NOT A SEPARATE CONTROLLER CARD).

DESCRIPTION OF SYMPTOMS
Not recognizing cdrom. OS2CDROM.DMD not found.
RESOLUTION:This is a hardware related problem. User needs to do the following:

On the back of the cdrom drive is a jumper which controls the bus device number. OS/2 install requires it to be on 0 (zero). Most sound board manufacturers leave it at the factory default of 1. If it is anything other than 0, the install disk #1 will not load the driver "OS2CDROM.DMD" and will stop installation with a red screen saying it can't find the cdrom.