HP T5740 Thin Client Hardware Report

From OS2World.Com Wiki
Jump to navigation Jump to search

Back to HP T5740 Thin Client.

PCI.EXE

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 5
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2A40h Mobile 4 Series Chipset Memory Controller Hub
 Command 0006h (Memory Access, BusMaster)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 09h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 2A408086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2A42h Mobile 4 Series Chipset Integrated Graphics Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Fast Timing)
 Revision 09h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 2A428086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : FE400000h
 Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h
 Address 4 is an I/O Port : C080h
 System IRQ 16, INT# A
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 2, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2A43h Mobile 4 Series Chipset Integrated Graphics Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Fast Timing)
 Revision 09h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type Other
 Subsystem ID 2A428086h Unknown
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : FE900000h
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 26, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2937h 82801I (ICH9 Family) USB UHCI Controller #4
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29378086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : C800h..C81Fh
 System IRQ 16, INT# A
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 26, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2938h 82801I (ICH9 Family) USB UHCI Controller #5
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29388086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : C480h..C49Fh
 System IRQ 21, INT# B
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 26, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2939h 82801I (ICH9 Family) USB UHCI Controller #6
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29398086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : C400h..C41Fh
 System IRQ 19, INT# D
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 26, Device Function 7
 Vendor 8086h Intel Corporation
 Device 293Ch 82801I (ICH9 Family) USB2 EHCI Controller #2
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 293C8086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : FEAFF400h..FEAFF7FFh
 System IRQ 18, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 27, Device Function 0
 Vendor 8086h Intel Corporation
 Device 293Eh 82801I (ICH9 Family) HD Audio Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 293E8086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : FEAF8000h..FEAFBFFFh
 System IRQ 22, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0

 Bus 0 (PCI Express), Device Number 28, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2940h 82801I (ICH9 Family) PCI Express Port 1
 Command 0504h (Bus Access Disabled!!, BusMaster, System Errors,
   Interrupt Disable)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 29408086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 17, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : None
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x4
       Link Port Number   : 1
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :   2.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 2940h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 4
 Vendor 8086h Intel Corporation
 Device 2948h 82801I (ICH9 Family) PCI Express Port 5
 Command 0504h (Bus Access Disabled!!, BusMaster, System Errors,
   Interrupt Disable)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 29488086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 17, INT# A
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 3
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : None
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 5
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x0
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :  10.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 2948h
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 28, Device Function 5
 Vendor 8086h Intel Corporation
 Device 294Ah 82801I (ICH9 Family) PCI Express Port 6
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 03h, Header Type 81h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Bridge, type PCI to PCI
 Subsystem ID 294A8086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 System IRQ 16, INT# B
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 4, Subordinate Bus number 4
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2000h (Received Master Abort, Fast Timing)
   Secondary Bus Latency 00h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : FEB00000h..FEBFFFFFh
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   PCI Express Capability, Version 1
     Device/Port Type : 
       Root port of PCI Express Root Complex
     Port Type :
       Port is an Expansion Slot
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 6
     Link Control :
       Common Clock Configuration In Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1
     Slot Capabilities :
       Hot Plug Surprise is Possible
       Hot Plug Capable
       Slot Power Limit Value :  12.000 Watts
       Physical slot Number 0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 294Ah
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 29, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2934h 82801I (ICH9 Family) USB UHCI Controller #1
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29348086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : D000h..D01Fh
 System IRQ 23, INT# A
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 29, Device Function 1
 Vendor 8086h Intel Corporation
 Device 2935h 82801I (ICH9 Family) USB UHCI Controller #2
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29358086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : CC00h..CC1Fh
 System IRQ 19, INT# B
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 29, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2936h 82801I (ICH9 Family) USB UHCI Controller #3
 Command 0005h (I/O Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI)
 Subsystem ID 29368086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is not present or not configured!
 Address 1 is not present or not configured!
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : C880h..C89Fh
 System IRQ 18, INT# C
 New Capabilities List Present:
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 29, Device Function 7
 Vendor 8086h Intel Corporation
 Device 293Ah 82801I (ICH9 Family) USB2 EHCI Controller #1
 Command 0006h (Memory Access, BusMaster)
 Status 0298h (Signalled Interrupt, Has Capabilities List,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB 2.0 (EHCI)
 Subsystem ID 293A8086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (0-4GiB) : FEAFF800h..FEAFFBFFh
 System IRQ 23, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   USB 2.0 EHCI Debug Port Capability
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 30, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2448h 82801 Mobile PCI Bridge
 Command 0104h (Bus Access Disabled!!, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 93h, Header Type 01h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to PCI (Subtractive Decode)
 Subsystem ID 24488086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 PCI Bridge Information:
   Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
   Secondary Bus Command 0002h (CSERR forwarded)
   Secondary Bus Status  2280h (Supports Back-To-Back Trans.,
     Received Master Abort, Medium Timing)
   Secondary Bus Latency 20h
   I/O Port Range Passed to Secondary Bus : None
   Memory   Range Passed to Secondary Bus : None
   Prefetchable Memory Range Passed to Secondary Bus : None
 New Capabilities List Present:
   Subsystem ID & Subsystem Vendor ID Capability
     SSVID : 8086h
     SSID  : 2448h

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device 2919h ICH9M LPC Interface Controller
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0210h (Has Capabilities List, Medium Timing)
 Revision 03h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 29198086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device 2928h 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 29288086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is an I/O Port : EC00h
 Address 1 is an I/O Port : E880h
 Address 2 is an I/O Port : E800h..E807h
 Address 3 is an I/O Port : E480h
 Address 4 is an I/O Port : E400h
 Address 5 is an I/O Port : E080h..E08Fh
 System IRQ 19, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 13h)!!

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device 2930h 82801I (ICH9 Family) SMBus Controller
 Command 0003h (I/O Access, Memory Access)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 29308086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is a Memory Address (64-bit) : FEAFFC00h
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : 0400h
 System IRQ 18, INT# C

 Bus 0 (PCI Express), Device Number 31, Device Function 5
 Vendor 8086h Intel Corporation
 Device 292Dh 82801IBM/IEM (ICH9M/ICH9M-E) 2 port SATA Controller [IDE mode]
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 03h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type IDE (ATA)
 PCI EIDE Controller Features :
   BusMaster EIDE is supported
   Primary   Channel is in native mode at Addresses 0 & 1
   Secondary Channel is in native mode at Addresses 2 & 3
 Subsystem ID 292D8086h Unknown (Generic ID)
 Subsystem Vendor 8086h Intel Corporation
 Address 0 is an I/O Port : DC00h..DC07h
 Address 1 is an I/O Port : D880h
 Address 2 is an I/O Port : D800h
 Address 3 is an I/O Port : D480h
 Address 4 is an I/O Port : D400h..D407h
 Address 5 is an I/O Port : D080h..D08Fh
 System IRQ 19, INT# B
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 13h)!!

 Bus 4 (PCI Express), Device Number 0, Device Function 0
 Vendor 14E4h Broadcom Inc. and subsidiaries
 Device 1692h NetLink BCM57780 Gigabit Ethernet PCIe
 Command 0006h (Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 01h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 Cache line size 32 Bytes (8 DWords)
 PCI Class Network, type Ethernet
 Subsystem ID 969214E4h Unknown
 Subsystem Vendor 14E4h Broadcom Inc. and subsidiaries
 Address 0 is a Memory Address (64-bit) : FEBF0000h..FEBFFFFFh
 System IRQ 17, INT# A
 Expansion ROM of 64 KiB decoded by this card, currently disabled
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
       800 mW D0 power consume
       800 mW D0 power dissipate
         0 mW D1 power consume
         0 mW D1 power dissipate
         0 mW D2 power consume
         0 mW D2 power dissipate
      6400 mW D3 power consume
      6400 mW D3 power dissipate
         0 mW common logic power consume
   Vendor-Dependant Capability
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   PCI Express Capability, Version 2
     Device/Port Type : 
       PCI Express Endpoint Device
     Device Capabilities :
       Unsupported Request Severity is Non-Fatal
     Device Status :
       AUX Power Detected
     Link Capabilities : 
       Maximum Link speed : 2.5Gb/s
       Maximum Link Width : x1
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : 2.5Gb/s
       Current Link Width : x1

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:5F50h
 Table Version 1.0 - OK
 Table size 224 bytes - OK
 Table Checksum 2Eh - OK
 PCI Interrupt Router: ICH9M LPC Interface Controller
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 16,17,18,19,21,22,23 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 3 PCI Devices
             IRQ 17 is shared by 3 PCI Devices
             IRQ 18 is shared by 3 PCI Devices
             IRQ 19 is shared by 4 PCI Devices
             IRQ 23 is shared by 2 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...

ACPI

The version of ACPI.PSD that is installed is 3.23.16
The system is operating in Symmetric mode (Mode 2)
The kernel is 14.203_SMP
The retail PSD is installed

Number of interrupts available: 60
IRQ 00 count 14729
IRQ 01 count 792
IRQ 08 count 420073
IRQ 09 count 346
IRQ 18 count 10922
IRQ 19 count 102796
MSI 22 count 706
IRQ 23 count 12
MSI 58 count 6873

========== CPU0 ==================
ACPI name [P001]
IPIGenCount = 74650      IPICount  = 74839      HaltCount = 0
IPIPsdCount = 0          IdleCount = 676212     BusyCount = 122044
========== CPU1 ==================
ACPI name [P002]
IPIGenCount = 74839      IPICount  = 74650      HaltCount = 28    
IPIPsdCount = 1          IdleCount = 321490     BusyCount = 321489

This system does not support CPU Performance Control via ACPI.

This system does not support CPU Throttling.

Thermal information:
  No Thermal information is available for this computer

No AC status is available for this computer

No Battery information is available for this computer
Power Manager is Enabled