Author Topic: PCMCIA Ethernet - Thinkpad - OS/2 Warp 3 Connect Help Needed  (Read 134 times)

Marc Galloway

  • Newbie
  • *
  • Posts: 18
  • Karma: +1/-0
    • View Profile
I'm needing help if anyone has any suggestions. I have a Thinkpad 600e with OS/2 Warp 3 Connect installed. I'm having trouble getting the PCMCIA 3Com EtherLink III 3C589D card working. When booting up I get a error saying interface does not exist. Here are the steps I have taken with some pictures:


1. Installed PC Card Director for OS/2 version 4.12 - https://thinkpads.com/support/Thinkpad-Drivers/download.lenovo.com/lenovo/content/ddfm/600e.html
2. Installed 3COM 3C589 Etherlink III PCMCIA ethernet card NDIS driver https://www.os2site.com/sw/drivers/network/3com/589os2.zip
3. Configured TCP/IP and NETBUI



« Last Edit: Today at 03:55:43 am by Marc Galloway »

Marc Galloway

  • Newbie
  • *
  • Posts: 18
  • Karma: +1/-0
    • View Profile
Rest of the pictures

Lars

  • Hero Member
  • *****
  • Posts: 1462
  • Karma: +73/-0
    • View Profile
Can you post your setup.cmd and also protocol.ini ?

The error does not sound as if this is HW or driver related. It rather sounds like TCP/IP not being set up correctly.

By the way: you might also consider applying the patch to the NDIS driver:
https://www.os2site.com/sw/drivers/network/3com/3c589patch.zip

That might not strictly be necessary on your system but it surely won't hurt either. In addition, it will make the "3net_log.exe" utility work.

Finally, look here, it is about Warp 4 but since you are using Warp 3, it might apply nonetheless:
https://www.os2world.com/olderforum/OS2World%20Ultraboard/www.os2world.com/cgi-bin/ultraboard/UltraBoardea6e.html?action=Print&BID=62&TID=1518&SID=
« Last Edit: Today at 02:20:06 pm by Lars »