HP ProDesk 400 G3 SFF Hardware Report
Return to HP ProDesk 400 G3 SFF.
PCI Report
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005. Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03" PCI BIOS Version 2.10 found! Number of PCI Busses : 3 PCI Characteristics : Config Mechanism 1 Searching for PCI Devices using the OEMHLP$ driver Bus 0 (PCI Express), Device Number 0, Device Function 0 Vendor 8086h Intel Corporation Device 191Fh Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers Command 0106h (Memory Access, BusMaster, System Errors) Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Received Master Abort, Fast Timing) Revision 07h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to HOST Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company New Capabilities List Present: Vendor-Dependant Capability Bus 0 (PCI Express), Device Number 2, Device Function 0 Vendor 8086h Intel Corporation Device 1912h HD Graphics 530 Command 0007h (I/O Access, Memory Access, BusMaster) Status 0010h (Has Capabilities List, Fast Timing) Revision 06h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Display, type VGA Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E0000000h Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h Address 4 is an I/O Port : 4000h System IRQ 16, INT# A New Capabilities List Present: Vendor-Dependant Capability PCI Express Capability, Version 2 Device/Port Type : Root Complex Integrated Endpoint Device Unsupported Request Severity is Non-Fatal Device Status : Link Capabilities : Maximum Link speed : Unknown (00h)!! Maximum Link Width : xReserved Link Port Number : 0 Link Control : Asynchronous Clocking in Use Link Status : Current Link speed : Unknown (00)!! Current Link Width : x0 Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 20, Device Function 0 Vendor 8086h Intel Corporation Device A12Fh 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller Command 0006h (Memory Access, BusMaster) Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium Timing) Revision 31h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type USB (UHCI), programming interface 30 Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E1200000h..E120FFFFh System IRQ 58, INT# A New Capabilities List Present: Power Management Capability, Version 1.1 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is enabled MSI function can generate 64-bit addresses Bus 0 (PCI Express), Device Number 20, Device Function 2 Vendor 8086h Intel Corporation Device A131h 100 Series/C230 Series Chipset Family Thermal Subsystem Command 0106h (Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision 31h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Data Aquisition & Signal Processing, type Other Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E122A000h System IRQ 18, INT# C New Capabilities List Present: Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Does not support PME# signalling Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Bus 0 (PCI Express), Device Number 22, Device Function 0 Vendor 8086h Intel Corporation Device A13Ah 100 Series/C230 Series Chipset Family MEI Controller #1 Command 0002h (Memory Access) Status 0010h (Has Capabilities List, Fast Timing) Revision 31h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Simple Communication, type Other Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E122B000h System IRQ 16, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is disabled MSI function can generate 64-bit addresses Bus 0 (PCI Express), Device Number 23, Device Function 0 Vendor 8086h Intel Corporation Device A102h Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back Trans., Medium Timing) Revision 31h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Storage, type Serial ATA (AHCI 1.0) Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (0-4GiB) : E1228000h..E1229FFFh Address 1 is a Memory Address (0-4GiB) : E122E000h..E122E0FFh Address 2 is an I/O Port : 4080h..4087h Address 3 is an I/O Port : 4088h..408Bh Address 4 is an I/O Port : 4060h..407Fh Address 5 is a Memory Address (0-4GiB) : E122C000h..E122C7FFh System IRQ 16, INT# A New Capabilities List Present: Message Signalled Interrupt Capability MSI is enabled MSI function can generate 32-bit addresses Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D3hot PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Unknown Capability (Code 12h)!! Bus 0 (PCI Express), Device Number 28, Device Function 0 Vendor 8086h Intel Corporation Device A114h 100 Series/C230 Series Chipset Family PCI Express Root Port #5 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision F1h, Header Type 81h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to PCI Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company System IRQ 16, INT# A PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1 Secondary Bus Command 0002h (CSERR forwarded) Secondary Bus Status 2000h (Received Master Abort, Fast Timing) Secondary Bus Latency 00h I/O Port Range Passed to Secondary Bus : 3000h..3FFFh (16-bit) Memory Range Passed to Secondary Bus : E1100000h..E11FFFFFh Prefetchable Memory Range Passed to Secondary Bus : None New Capabilities List Present: PCI Express Capability, Version 2 Device/Port Type : Root port of PCI Express Root Complex Port Type : Port is an Expansion Slot Unsupported Request Severity is Non-Fatal Device Status : AUX Power Detected Link Capabilities : Maximum Link speed : Unknown (02h)!! Maximum Link Width : x1 Link Port Number : 5 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 Slot Capabilities : Slot Power Limit Value : 10.000 Watts Physical slot Number 0 Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Subsystem ID & Subsystem Vendor ID Capability SSVID : 103Ch SSID : 8062h Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 28, Device Function 5 Vendor 8086h Intel Corporation Device A115h 100 Series/C230 Series Chipset Family PCI Express Root Port #6 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision F1h, Header Type 81h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to PCI Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company System IRQ 17, INT# B PCI Bridge Information: Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2 Secondary Bus Command 0002h (CSERR forwarded) Secondary Bus Status 2000h (Received Master Abort, Fast Timing) Secondary Bus Latency 00h I/O Port Range Passed to Secondary Bus : None Memory Range Passed to Secondary Bus : E1000000h..E10FFFFFh Prefetchable Memory Range Passed to Secondary Bus : None New Capabilities List Present: PCI Express Capability, Version 2 Device/Port Type : Root port of PCI Express Root Complex Port Type : Port is an Expansion Slot Unsupported Request Severity is Non-Fatal Device Status : AUX Power Detected Link Capabilities : Maximum Link speed : Unknown (02h)!! Maximum Link Width : x1 Link Port Number : 6 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 Slot Capabilities : Slot Power Limit Value : 12.000 Watts Physical slot Number 0 Message Signalled Interrupt Capability MSI is disabled MSI function can generate 32-bit addresses Subsystem ID & Subsystem Vendor ID Capability SSVID : 103Ch SSID : 8062h Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) Bus 0 (PCI Express), Device Number 31, Device Function 0 Vendor 8086h Intel Corporation Device A143h H110 Chipset LPC/eSPI Controller Command 0507h (I/O Access, Memory Access, BusMaster, System Errors, Interrupt Disable) Status 0000h Revision 31h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Bridge, type PCI to ISA Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Bus 0 (PCI Express), Device Number 31, Device Function 2 Vendor 8086h Intel Corporation Device A121h 100 Series/C230 Series Chipset Family Power Management Controller Command 0006h (Memory Access, BusMaster) Status 0000h Revision 31h, Header Type 80h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Memory, type Other Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (0-4GiB) : E1224000h Bus 0 (PCI Express), Device Number 31, Device Function 3 Vendor 8086h Intel Corporation Device A170h 100 Series/C230 Series Chipset Family HD Audio Controller Command 0106h (Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision 31h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Multimedia, type Unknown! Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E1220000h..E1223FFFh Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is a Memory Address (64-bit) : E1210000h..E121FFFFh System IRQ 16, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Does not support low power State D1 or D2 Supports PME# signalling from mode(s) D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 55 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is enabled MSI function can generate 64-bit addresses Bus 0 (PCI Express), Device Number 31, Device Function 4 Vendor 8086h Intel Corporation Device A123h 100 Series/C230 Series Chipset Family SMBus Command 0103h (I/O Access, Memory Access, System Errors) Status 0280h (Supports Back-To-Back Trans., Medium Timing) Revision 31h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Serial, type SMBus Controller Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E122D000h Address 2 is not present or not configured! Address 3 is not present or not configured! Address 4 is an I/O Port : EFA0h System IRQ 16, INT# A Bus 1 (PCI Express), Device Number 0, Device Function 0 Vendor 10ECh Realtek Semiconductor Co., Ltd. Device 8168h RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller Command 0107h (I/O Access, Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision 15h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Network, type Ethernet Subsystem ID 8062103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is an I/O Port : 3000h..30FFh Address 1 is not present or not configured! Address 2 is a Memory Address (64-bit) : E1104000h..E1104FFFh Address 4 is a Memory Address (64-bit) : E1100000h..E1103FFFh System IRQ 16, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 375 mA Current Power State : D0 (Device operational, no power saving) Message Signalled Interrupt Capability MSI is enabled MSI function can generate 64-bit addresses PCI Express Capability, Version 2 Device/Port Type : PCI Express Endpoint Device Device Capabilities : Unsupported Request Severity is Fatal Device Status : Correctable Error Detected Unsupported Request Detected AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 MSI-X Capability Bus 2 (PCI Express), Device Number 0, Device Function 0 Vendor 14E4h Broadcom Inc. and subsidiaries Device 4359h BCM43228 802.11a/b/g/n Command 0106h (Memory Access, BusMaster, System Errors) Status 0010h (Has Capabilities List, Fast Timing) Revision 00h, Header Type 00h, Bus Latency Timer 00h Self test 00h (Self test not supported) PCI Class Network, type Other Subsystem ID 8088103Ch Unknown Subsystem Vendor 103Ch Hewlett-Packard Company Address 0 is a Memory Address (64-bit) : E1000000h System IRQ 17, INT# A New Capabilities List Present: Power Management Capability, Version 1.2 Supports low power State D1 Supports low power State D2 Supports PME# signalling from mode(s) D0, D3hot, D3cold PME# signalling is currently disabled 3.3v AUX Current required : 0 mA (Self powered) Current Power State : D0 (Device operational, no power saving) 0 mW D0 power consume 0 mW D0 power dissipate 0 mW D1 power consume 0 mW D1 power dissipate 0 mW D2 power consume 0 mW D2 power dissipate 0 mW D3 power consume 0 mW D3 power dissipate 0 mW common logic power consume Vendor-Dependant Capability Message Signalled Interrupt Capability MSI is disabled MSI function can generate 64-bit addresses PCI Express Capability, Version 1 Device/Port Type : PCI Express Endpoint Device Device Capabilities : Unsupported Request Severity is Non-Fatal Device Status : Correctable Error Detected Unsupported Request Detected AUX Power Detected Link Capabilities : Maximum Link speed : 2.5Gb/s Maximum Link Width : x1 Link Port Number : 0 Link Control : Common Clock Configuration In Use Link Status : Current Link speed : 2.5Gb/s Current Link Width : x1 ROM PCI IRQ routing table Tests.... ROM IRQ routing table found at F000h:7E00h Table Version 1.0 - OK Table size 160 bytes - OK Table Checksum DEh - OK PCI Interrupt Router: H110 Chipset LPC/eSPI Controller IRQ's dedicated to PCI : None The ROM PCI IRQ routing table appears to be OK. IRQ Summary: IRQs 16,17,18,58 are used by PCI devices Shared IRQs: IRQ 16 is shared by 7 PCI Devices IRQ 17 is shared by 2 PCI Devices IRQ control is currently managed by the system APIC controller - IRQ info is not actual hardware settings...