Dell Latitude D630 Hardware Report
Jump to navigation
Jump to search
Return to Dell Latitude D630
AHCI Disabled
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03"
PCI BIOS Version 2.10 found!
Number of PCI Busses : 13
PCI Characteristics : Config Mechanism 1
Searching for PCI Devices using the OEMHLP$ driver
Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 2A00h Mobile PM965/GM965/GL960 Memory Controller Hub
Command 0006h (Memory Access, BusMaster)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
Received Master Abort, Fast Timing)
Revision 0Ch, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 2A02h Mobile GM965/GL960 Integrated Graphics Controller (primary)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 0Ch, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type VGA
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FEA00000h
Address 2 is a Memory Address (64-bit, Prefetchable) : E0000000h
Address 4 is an I/O Port : EFE8h
System IRQ 16, INT# A
New Capabilities List Present:
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 2, Device Function 1
Vendor 8086h Intel Corporation
Device 2A03h Mobile GM965/GL960 Integrated Graphics Controller (secondary)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 0Ch, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type Other
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FEB00000h
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 26, Device Function 0
Vendor 8086h Intel Corporation
Device 2834h 82801H (ICH8 Family) USB UHCI Controller #4
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F20h..6F3Fh
System IRQ 20, INT# A
Bus 0 (PCI Express), Device Number 26, Device Function 1
Vendor 8086h Intel Corporation
Device 2835h 82801H (ICH8 Family) USB UHCI Controller #5
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F00h..6F1Fh
System IRQ 21, INT# B
Bus 0 (PCI Express), Device Number 26, Device Function 7
Vendor 8086h Intel Corporation
Device 283Ah 82801H (ICH8 Family) USB2 EHCI Controller #2
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FED1C400h..FED1C7FFh
System IRQ 22, INT# C
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Bus 0 (PCI Express), Device Number 27, Device Function 0
Vendor 8086h Intel Corporation
Device 284Bh 82801H (ICH8 Family) HD Audio Controller
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Multimedia, type Unknown!
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FE9FC000h..FE9FFFFFh
System IRQ 21, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 55 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Root Complex Integrated Endpoint Device
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : Unknown (00h)!!
Maximum Link Width : xReserved
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : Unknown (00)!!
Current Link Width : x0
Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device 283Fh 82801H (ICH8 Family) PCI Express Port 1
Command 0507h (I/O Access, Memory Access, BusMaster, System Errors,
Interrupt Disable)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 11, Subordinate Bus number 11
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 1
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x0
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 2.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 1
Vendor 8086h Intel Corporation
Device 2841h 82801H (ICH8 Family) PCI Express Port 2
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 12, Subordinate Bus number 12
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE800000h..FE8FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 2
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 0.040 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 5
Vendor 8086h Intel Corporation
Device 2849h 82801H (ICH8 Family) PCI Express Port 6
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 9, Subordinate Bus number 9
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE700000h..FE7FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
Correctable Error Detected
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 6
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 12.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device 2830h 82801H (ICH8 Family) USB UHCI Controller #1
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F80h..6F9Fh
System IRQ 20, INT# A
Bus 0 (PCI Express), Device Number 29, Device Function 1
Vendor 8086h Intel Corporation
Device 2831h 82801H (ICH8 Family) USB UHCI Controller #2
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F60h..6F7Fh
System IRQ 21, INT# B
Bus 0 (PCI Express), Device Number 29, Device Function 2
Vendor 8086h Intel Corporation
Device 2832h 82801H (ICH8 Family) USB UHCI Controller #3
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F40h..6F5Fh
System IRQ 22, INT# C
Bus 0 (PCI Express), Device Number 29, Device Function 7
Vendor 8086h Intel Corporation
Device 2836h 82801H (ICH8 Family) USB2 EHCI Controller #1
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FED1C000h..FED1C3FFh
System IRQ 20, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Bus 0 (PCI Express), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device 2448h 82801 Mobile PCI Bridge
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F2h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 4
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status A280h (Supports Back-To-Back Trans.,
Received Master Abort, Detected Parity Error, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE600000h..FE6FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device 2815h 82801HM (ICH8M) LPC Interface Controller
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 31, Device Function 1
Vendor 8086h Intel Corporation
Device 2850h 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
Command 0005h (I/O Access, BusMaster)
Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is an I/O Port : 01F0h..01F7h
Address 1 is an I/O Port : 03F4h
Address 2 is an I/O Port : 0170h
Address 3 is an I/O Port : 0374h
Address 4 is an I/O Port : 6FA0h..6FA7h
System IRQ 16, INT# A
Bus 0 (PCI Express), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device 2828h 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is an I/O Port : 6EB0h..6EB7h
Address 1 is an I/O Port : 6EB8h
Address 2 is an I/O Port : 6EC0h
Address 3 is an I/O Port : 6EC8h
Address 4 is an I/O Port : 6EE0h..6EE7h
Address 5 is an I/O Port : EFF0h..EFFFh
System IRQ 17, INT# B
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 283Eh 82801H (ICH8 Family) SMBus Controller
Command 0103h (I/O Access, Memory Access, System Errors)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE9FBF00h
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 10C0h
System IRQ 17, INT# B
Bus 3 (PCI), Device Number 1, Device Function 0
Vendor 1217h O2 Micro, Inc.
Device 7135h Cardbus bridge
Command 0000h (Bus Access Disabled!!)
Status 0410h (Has Capabilities List, Slow Timing)
Revision 21h, Header Type 82h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to Cardbus
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ 19, INT# A
CardBus Bridge Information:
PCI Bus Number 3, CardBus Bus Number 4, Subordinate Bus number 4
CardBus Latency 20h
Secondary Bus Command 0040h (bus is in RESET, ints routed by PCI)
Secondary Bus Status 0200h (Medium Timing)
Socket/ExCa Base Memory Address : 00000000h
Memory Range 0 : None
Memory Range 1 : None
I/O Port Range 0 : 0000h..0003h
I/O Port Range 1 : 0000h..0003h
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
0 mW D0 power consume
0 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
0 mW D3 power consume
0 mW D3 power dissipate
0 mW common logic power consume
Bus 3 (PCI), Device Number 1, Device Function 4
Vendor 1217h O2 Micro, Inc.
Device 00F7h Firewire (IEEE 1394)
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Serial, type OHCI FireWire
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE6FF000h
Address 1 is a Memory Address (0-4GiB) : FE6FE800h
System IRQ 19, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 9 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 1673h NetXtreme BCM5755M Gigabit Ethernet PCI Express
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Network, type Ethernet
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FE7F0000h..FE7FFFFFh
System IRQ 17, INT# A
Expansion ROM of 64 KiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently enabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
10000 mW D0 power consume
10000 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
1000 mW D3 power consume
1000 mW D3 power dissipate
0 mW common logic power consume
Vital Product Data Capability
Identifier Broadcom NetXtreme Gigabit Ethernet Controller
Part Number BCM95755m
EC Level (Version) 01f9.004
Serial Number 0123456789
Manufacturer ID 14e4
Checksum/End B6h 28*00h
System Specific XYZ01234567
Remaining RW Area 107*00h
End Tag
Vendor-Dependant Capability
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Bus 12 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 4311h BCM4311 802.11b/g WLAN
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Network, type Other
Subsystem ID 00071028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE8FC000h
System IRQ 17, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
0 mW D0 power consume
0 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
0 mW D3 power consume
0 mW D3 power dissipate
0 mW common logic power consume
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Legacy PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
Correctable Error Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:A560h
Table Version 1.0 - OK
Table size 240 bytes - OK
Table Checksum 10h - OK
PCI Interrupt Router: 82801HM (ICH8M) LPC Interface Controller
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be OK.
IRQ Summary: IRQs 14,15,16,17,19,20,21,22 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 2 PCI Devices
IRQ 17 is shared by 4 PCI Devices
IRQ 19 is shared by 2 PCI Devices
IRQ 20 is shared by 3 PCI Devices
IRQ 21 is shared by 3 PCI Devices
IRQ 22 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...
AHCI Enabled
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2021.07.20 of pci.ids using ids2devs version 1.03"
PCI BIOS Version 2.10 found!
Number of PCI Busses : 13
PCI Characteristics : Config Mechanism 1
Searching for PCI Devices using the OEMHLP$ driver
Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 8086h Intel Corporation
Device 2A00h Mobile PM965/GM965/GL960 Memory Controller Hub
Command 0006h (Memory Access, BusMaster)
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
Received Master Abort, Fast Timing)
Revision 0Ch, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 8086h Intel Corporation
Device 2A02h Mobile GM965/GL960 Integrated Graphics Controller (primary)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 0Ch, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type VGA
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FEA00000h
Address 2 is a Memory Address (64-bit, Prefetchable) : E0000000h
Address 4 is an I/O Port : EFF8h
System IRQ 16, INT# A
New Capabilities List Present:
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 2, Device Function 1
Vendor 8086h Intel Corporation
Device 2A03h Mobile GM965/GL960 Integrated Graphics Controller (secondary)
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0090h (Has Capabilities List, Supports Back-To-Back Trans.,
Fast Timing)
Revision 0Ch, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Display, type Other
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FEB00000h
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 26, Device Function 0
Vendor 8086h Intel Corporation
Device 2834h 82801H (ICH8 Family) USB UHCI Controller #4
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F20h..6F3Fh
System IRQ 20, INT# A
Bus 0 (PCI Express), Device Number 26, Device Function 1
Vendor 8086h Intel Corporation
Device 2835h 82801H (ICH8 Family) USB UHCI Controller #5
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F00h..6F1Fh
System IRQ 21, INT# B
Bus 0 (PCI Express), Device Number 26, Device Function 7
Vendor 8086h Intel Corporation
Device 283Ah 82801H (ICH8 Family) USB2 EHCI Controller #2
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FED1C400h..FED1C7FFh
System IRQ 22, INT# C
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Bus 0 (PCI Express), Device Number 27, Device Function 0
Vendor 8086h Intel Corporation
Device 284Bh 82801H (ICH8 Family) HD Audio Controller
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Multimedia, type Unknown!
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FE9FC000h..FE9FFFFFh
System IRQ 21, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 55 mA
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Root Complex Integrated Endpoint Device
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : Unknown (00h)!!
Maximum Link Width : xReserved
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : Unknown (00)!!
Current Link Width : x0
Bus 0 (PCI Express), Device Number 28, Device Function 0
Vendor 8086h Intel Corporation
Device 283Fh 82801H (ICH8 Family) PCI Express Port 1
Command 0507h (I/O Access, Memory Access, BusMaster, System Errors,
Interrupt Disable)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# A
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 11, Subordinate Bus number 11
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 1
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x0
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 2.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 1
Vendor 8086h Intel Corporation
Device 2841h 82801H (ICH8 Family) PCI Express Port 2
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 12, Subordinate Bus number 12
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE800000h..FE8FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 2
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 0.040 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 28, Device Function 5
Vendor 8086h Intel Corporation
Device 2849h 82801H (ICH8 Family) PCI Express Port 6
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 81h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ (disabled), INT# B
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 9, Subordinate Bus number 9
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE700000h..FE7FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 6
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Slot Capabilities :
Hot Plug Surprise is Possible
Hot Plug Capable
Slot Power Limit Value : 12.000 Watts
Physical slot Number 0
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 0 (PCI Express), Device Number 29, Device Function 0
Vendor 8086h Intel Corporation
Device 2830h 82801H (ICH8 Family) USB UHCI Controller #1
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F80h..6F9Fh
System IRQ 20, INT# A
Bus 0 (PCI Express), Device Number 29, Device Function 1
Vendor 8086h Intel Corporation
Device 2831h 82801H (ICH8 Family) USB UHCI Controller #2
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F60h..6F7Fh
System IRQ 21, INT# B
Bus 0 (PCI Express), Device Number 29, Device Function 2
Vendor 8086h Intel Corporation
Device 2832h 82801H (ICH8 Family) USB UHCI Controller #3
Command 0005h (I/O Access, BusMaster)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (UHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 6F40h..6F5Fh
System IRQ 22, INT# C
Bus 0 (PCI Express), Device Number 29, Device Function 7
Vendor 8086h Intel Corporation
Device 2836h 82801H (ICH8 Family) USB2 EHCI Controller #1
Command 0006h (Memory Access, BusMaster)
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FED1C000h..FED1C3FFh
System IRQ 20, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 375 mA
Current Power State : D0 (Device operational, no power saving)
USB 2.0 EHCI Debug Port Capability
Bus 0 (PCI Express), Device Number 30, Device Function 0
Vendor 8086h Intel Corporation
Device 2448h 82801 Mobile PCI Bridge
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision F2h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 3, Subordinate Bus number 4
Secondary Bus Command 0002h (CSERR forwarded)
Secondary Bus Status A280h (Supports Back-To-Back Trans.,
Received Master Abort, Detected Parity Error, Medium Timing)
Secondary Bus Latency 20h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : FE600000h..FE6FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Subsystem ID & Subsystem Vendor ID Capability
SSVID : 1028h
SSID : 01F9h
Bus 0 (PCI Express), Device Number 31, Device Function 0
Vendor 8086h Intel Corporation
Device 2815h 82801HM (ICH8M) LPC Interface Controller
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 02h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
New Capabilities List Present:
Vendor-Dependant Capability
Bus 0 (PCI Express), Device Number 31, Device Function 1
Vendor 8086h Intel Corporation
Device 2850h 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller
Command 0005h (I/O Access, BusMaster)
Status 0288h (Signalled Interrupt, Supports Back-To-Back Trans.,
Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is an I/O Port : 01F0h..01F7h
Address 1 is an I/O Port : 03F4h
Address 2 is an I/O Port : 0170h
Address 3 is an I/O Port : 0374h
Address 4 is an I/O Port : 6FA0h..6FA7h
System IRQ 16, INT# A
Bus 0 (PCI Express), Device Number 31, Device Function 2
Vendor 8086h Intel Corporation
Device 2829h 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode]
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 02B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Storage, type Serial ATA (AHCI 1.0)
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is an I/O Port : 6EB0h..6EB7h
Address 1 is an I/O Port : 6EB8h..6EBBh
Address 2 is an I/O Port : 6EC0h..6EC7h
Address 3 is an I/O Port : 6EC8h..6ECBh
Address 4 is an I/O Port : 6EE0h..6EFFh
Address 5 is a Memory Address (0-4GiB) : FE9FB800h..FE9FBFFFh
System IRQ 17, INT# B
New Capabilities List Present:
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 32-bit addresses
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Unknown Capability (Code 12h)!!
Bus 0 (PCI Express), Device Number 31, Device Function 3
Vendor 8086h Intel Corporation
Device 283Eh 82801H (ICH8 Family) SMBus Controller
Command 0103h (I/O Access, Memory Access, System Errors)
Status 0280h (Supports Back-To-Back Trans., Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE9FB700h
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 10C0h
System IRQ 17, INT# B
Bus 3 (PCI), Device Number 1, Device Function 0
Vendor 1217h O2 Micro, Inc.
Device 7135h Cardbus bridge
Command 0000h (Bus Access Disabled!!)
Status 0410h (Has Capabilities List, Slow Timing)
Revision 21h, Header Type 82h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to Cardbus
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
System IRQ 19, INT# A
CardBus Bridge Information:
PCI Bus Number 3, CardBus Bus Number 4, Subordinate Bus number 4
CardBus Latency 20h
Secondary Bus Command 0040h (bus is in RESET, ints routed by PCI)
Secondary Bus Status 0200h (Medium Timing)
Socket/ExCa Base Memory Address : 00000000h
Memory Range 0 : None
Memory Range 1 : None
I/O Port Range 0 : 0000h..0003h
I/O Port Range 1 : 0000h..0003h
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
0 mW D0 power consume
0 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
0 mW D3 power consume
0 mW D3 power dissipate
0 mW common logic power consume
Bus 3 (PCI), Device Number 1, Device Function 4
Vendor 1217h O2 Micro, Inc.
Device 00F7h Firewire (IEEE 1394)
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0210h (Has Capabilities List, Medium Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Serial, type OHCI FireWire
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE6FF000h
Address 1 is a Memory Address (0-4GiB) : FE6FE800h
System IRQ 19, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Bus 9 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 1673h NetXtreme BCM5755M Gigabit Ethernet PCI Express
Command 0106h (Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 02h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Network, type Ethernet
Subsystem ID 01F91028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (64-bit) : FE7F0000h..FE7FFFFFh
System IRQ 17, INT# A
Expansion ROM of 64 KiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.2
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently enabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
10000 mW D0 power consume
10000 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
1000 mW D3 power consume
1000 mW D3 power dissipate
0 mW common logic power consume
Vital Product Data Capability
Identifier Broadcom NetXtreme Gigabit Ethernet Controller
Part Number BCM95755m
EC Level (Version) 01f9.004
Serial Number 0123456789
Manufacturer ID 14e4
Checksum/End B6h 28*00h
System Specific XYZ01234567
Remaining RW Area 107*00h
End Tag
Vendor-Dependant Capability
Message Signalled Interrupt Capability
MSI is enabled
MSI function can generate 64-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
AUX Power Detected
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
Bus 12 (PCI Express), Device Number 0, Device Function 0
Vendor 14E4h Broadcom Inc. and subsidiaries
Device 4311h BCM4311 802.11b/g WLAN
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Network, type Other
Subsystem ID 00071028h Unknown
Subsystem Vendor 1028h Dell
Address 0 is a Memory Address (0-4GiB) : FE8FC000h
System IRQ 17, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
0 mW D0 power consume
0 mW D0 power dissipate
0 mW D1 power consume
0 mW D1 power dissipate
0 mW D2 power consume
0 mW D2 power dissipate
0 mW D3 power consume
0 mW D3 power dissipate
0 mW common logic power consume
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 32-bit addresses
PCI Express Capability, Version 1
Device/Port Type :
Legacy PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x1
Link Port Number : 0
Link Control :
Common Clock Configuration In Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x1
ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:A560h
Table Version 1.0 - OK
Table size 240 bytes - OK
Table Checksum 10h - OK
PCI Interrupt Router: 82801HM (ICH8M) LPC Interface Controller
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be OK.
IRQ Summary: IRQs 14,15,16,17,19,20,21,22 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 2 PCI Devices
IRQ 17 is shared by 4 PCI Devices
IRQ 19 is shared by 2 PCI Devices
IRQ 20 is shared by 3 PCI Devices
IRQ 21 is shared by 3 PCI Devices
IRQ 22 is shared by 2 PCI Devices
IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...