HP EliteDesk 800 G2 Hardware Report

From OS2World.Com Wiki
Jump to navigation Jump to search

Back to HP EliteDesk 800 G2.

TestLog report

----- System Information -------------------------------------------------------
CPU: GenuineIntel Intel(R) Core(TM) i5-6500 CPU @ 3.20GHz
CPU Speed: 3172 Mhz
CPU Count: 1
Loader's physical memory layout:
  Memory below 1MB: 620.00 KiB
  Memory between 1MB and 4GB: 2.97 GiB
  Memory below 4GB: 2.98 GiB
  Memory above 4GB: 4.77 GiB
Kernel's physical memory layout (4):
  From 00000000 to 00032FFF size=204.00 KiB
  From 00034000 to 00036FFF size=12.00 KiB
  From 0003F000 to 0009AFFF size=368.00 KiB
  From 00100000 to BEA6FFFF size=2.97 GiB
Physical memory: 2.97 GiB
Available memory: 2.63 GiB
Available Private memory: 246.06 MiB
Available Shared memory: 183.62 MiB
Virtual Address Limit: 1536
Max Processes: 1025
SMBIOS from IOCtl Ix=1 Adr=bf8ec000 Len=1f
SMBIOS version 2.7.0 at bf8eb000 len=b1e
BIOS Information:
 Vendor: HP
 Version: N21 Ver. 02.61
 Release Date: 03/17/2023
 ROM Size: 16384 kB
 ACPI is supported
 UEFI is supported
 BIOS Revision: 2.61
 Firmware Revision: 5.57
System Information:
 Manufacturer: HP
 Product Name: HP EliteDesk 800 G2 DM 65W
 Version:  
 Serial Number: xxxxxxxxxxxxx
 UUID: xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Base Board Information:
 Manufacturer: HP
 Product Name: 8056
 Version: KBC Version 05.39
 Serial Number: xxxxxxxxxxxxxxx
OEM Strings:
 String 1: FBYTE#3E3X476J6S6b7H7M7Q7T7W7a7maBapaqaub7bhbmdUdpdqfSfygz.yF;
 String 2: BUILDID#15WWP3GT601#SABD#DABD;
 String 3: EDK2_1

----- USB device tree ----------------------------------------------------------
DS 0780=7838

Controller 0: USBXHCD$
Root Hub 0 (26 ports) 8086:A12F
  Port 3:  Hub 1 (4 ports) 05E3:0610 (HS hub with single TT) Genesys Logic, Inc. 
  Port 4: Device 046A:B091 (HID)-(Mouse) LS Cherry GmbH 
  Port 5: Device 046A:B090 (HID)-(Keyboard)(HID) LS Cherry GmbH 
  Port 19:  Hub 2 (4 ports) 05E3:0626 (SS hub) Genesys Logic, Inc. 
  Port 24: Device 058F:6387 (MSD)-(SCSI)-(BO) SS Alcor Micro Corp. Transcend JetFlash 110 USB 2.0 Flash D

----- Output of: C:\sys\install\DETECT\PCI.EXE -N ------------------------------
Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 2023.05.16 of pci.ids using ids2devs version 1.03"

PCI BIOS Version 2.10 found!
Number of PCI Busses : 1
PCI Characteristics  : Config Mechanism 1 

Searching for PCI Devices using the OEMHLP$ driver

 Bus 0 (PCI Express), Device Number 0, Device Function 0
 Vendor 8086h Intel Corporation
 Device 191Fh Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 2090h (Has Capabilities List, Supports Back-To-Back Trans.,
   Received Master Abort, Fast Timing)
 Revision 07h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to HOST
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 New Capabilities List Present:
   Vendor-Dependant Capability

 Bus 0 (PCI Express), Device Number 2, Device Function 0
 Vendor 8086h Intel Corporation
 Device 1912h HD Graphics 530
 Command 0007h (I/O Access, Memory Access, BusMaster)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 06h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Display, type VGA
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E0000000h
 Address 2 is a Memory Address (64-bit, Prefetchable) : D0000000h
 Address 4 is an I/O Port : 3000h
 System IRQ 16, INT# A
 New Capabilities List Present:
   Vendor-Dependant Capability
   PCI Express Capability, Version 2
     Device/Port Type : 
       Root Complex Integrated Endpoint Device
       Unsupported Request Severity is Non-Fatal
     Device Status :
     Link Capabilities : 
       Maximum Link speed : Unknown (00h)!!
       Maximum Link Width : xReserved
       Link Port Number   : 0
     Link Control :
       Asynchronous Clocking in Use
     Link Status :
       Current Link speed : Unknown (00)!!
       Current Link Width : x0
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 20, Device Function 0
 Vendor 8086h Intel Corporation
 Device A12Fh 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
 Command 0006h (Memory Access, BusMaster)
 Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
   Medium Timing)
 Revision 31h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type USB (UHCI), programming interface 30
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E1020000h..E102FFFFh
 System IRQ (disabled), INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.1
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 375 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 20, Device Function 2
 Vendor 8086h Intel Corporation
 Device A131h 100 Series/C230 Series Chipset Family Thermal Subsystem
 Command 0102h (Memory Access, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 31h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Data Aquisition & Signal Processing, type Other
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E104B000h
 System IRQ 18, INT# C
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 32-bit addresses

 Bus 0 (PCI Express), Device Number 22, Device Function 0
 Vendor 8086h Intel Corporation
 Device A13Ah 100 Series/C230 Series Chipset Family MEI Controller #1
 Command 0000h (Bus Access Disabled!!)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 31h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Simple Communication, type Other
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E104C000h
 System IRQ 16, INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 22, Device Function 3
 Vendor 8086h Intel Corporation
 Device A13Dh 100 Series/C230 Series Chipset Family KT Redirection
 Command 0003h (I/O Access, Memory Access)
 Status 00B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Fast Timing)
 Revision 31h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Simple Communication, type Serial - 16550
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is an I/O Port : 3080h
 Address 1 is a Memory Address (0-4GiB) : E104A000h
 System IRQ 19, INT# D
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is disabled
     MSI function can generate 64-bit addresses
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Does not support PME# signalling
     Current Power State : D0 (Device operational, no power saving)

 Bus 0 (PCI Express), Device Number 23, Device Function 0
 Vendor 8086h Intel Corporation
 Device A102h Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
 Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
 Status 02B0h (Has Capabilities List, Supports 66MHz,
   Supports Back-To-Back Trans., Medium Timing)
 Revision 31h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Storage, type Serial ATA (AHCI 1.0)
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : E1048000h..E1049FFFh
 Address 1 is a Memory Address (0-4GiB) : E104F000h..E104F0FFh
 Address 2 is an I/O Port : 3088h..308Fh
 Address 3 is an I/O Port : 3090h..3093h
 Address 4 is an I/O Port : 3040h..305Fh
 Address 5 is a Memory Address (0-4GiB) : E104D000h..E104D7FFh
 System IRQ (disabled), INT# A
 New Capabilities List Present:
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 32-bit addresses
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Unknown Capability (Code 12h)!!

 Bus 0 (PCI Express), Device Number 31, Device Function 0
 Vendor 8086h Intel Corporation
 Device A146h Q170 Chipset LPC/eSPI Controller
 Command 0507h (I/O Access, Memory Access, BusMaster, System Errors,
   Interrupt Disable)
 Status 0000h
 Revision 31h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Bridge, type PCI to ISA
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company

 Bus 0 (PCI Express), Device Number 31, Device Function 2
 Vendor 8086h Intel Corporation
 Device A121h 100 Series/C230 Series Chipset Family Power Management Controller
 Command 0000h (Bus Access Disabled!!)
 Status 0000h
 Revision 31h, Header Type 80h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Memory, type Other
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : E1040000h

 Bus 0 (PCI Express), Device Number 31, Device Function 3
 Vendor 8086h Intel Corporation
 Device A170h 100 Series/C230 Series Chipset Family HD Audio Controller
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 31h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Multimedia, type Unknown!
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E1044000h..E1047FFFh
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is a Memory Address (64-bit) : E1030000h..E103FFFFh
 System IRQ (disabled), INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 55 mA
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses

 Bus 0 (PCI Express), Device Number 31, Device Function 4
 Vendor 8086h Intel Corporation
 Device A123h 100 Series/C230 Series Chipset Family SMBus
 Command 0100h (Bus Access Disabled!!, System Errors)
 Status 0280h (Supports Back-To-Back Trans., Medium Timing)
 Revision 31h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Serial, type SMBus Controller
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (64-bit) : E104E000h
 Address 2 is not present or not configured!
 Address 3 is not present or not configured!
 Address 4 is an I/O Port : EFA0h
 System IRQ 16, INT# A

 Bus 0 (PCI Express), Device Number 31, Device Function 6
 Vendor 8086h Intel Corporation
 Device 15B7h Ethernet Connection (2) I219-LM
 Command 0106h (Memory Access, BusMaster, System Errors)
 Status 0010h (Has Capabilities List, Fast Timing)
 Revision 31h, Header Type 00h, Bus Latency Timer 00h
 Self test 00h (Self test not supported)
 PCI Class Network, type Ethernet
 Subsystem ID 8056103Ch Unknown
 Subsystem Vendor 103Ch Hewlett-Packard Company
 Address 0 is a Memory Address (0-4GiB) : E1000000h..E101FFFFh
 System IRQ (disabled), INT# A
 New Capabilities List Present:
   Power Management Capability, Version 1.2
     Does not support low power State D1 or D2
     Supports PME# signalling from mode(s) D0, D3hot, D3cold
     PME# signalling is currently disabled
     3.3v AUX Current required : 0 mA (Self powered)
     Current Power State : D0 (Device operational, no power saving)
   Message Signalled Interrupt Capability
     MSI is enabled
     MSI function can generate 64-bit addresses
   Unknown Capability (Code 13h)!!

ROM PCI IRQ routing table Tests....
 ROM IRQ routing table found at F000h:7E00h
 Table Version 1.0 - OK
 Table size 112 bytes - OK
 Table Checksum A1h - OK
 PCI Interrupt Router: Q170 Chipset LPC/eSPI Controller
 IRQ's dedicated to PCI : None
 The ROM PCI IRQ routing table appears to be OK.

IRQ Summary: IRQs 16,18,19 are used by PCI devices
Shared IRQs: IRQ 16 is shared by 3 PCI Devices

IRQ control is currently managed by the system APIC controller - IRQ info is
not actual hardware settings...