ZEOS Pantera P90 Flash BIOS

From OS2World.Com Wiki
Jump to navigation Jump to search

Return to The Hardware Shelf

USER MAY GET SYS3175 IN INSTALL.EXE WHILE INSTALLING WARP ON ZEOS PANTERA SYSTEM

Last updated: 11 Feb 1995

DESCRIPTION OF SYMPTOMS

User may get the following SYS3175 in Install.exe during OS/2 3.0 Installation on Zeos Pantera P90 System.

 *************** SYS3175 32-bit***************
 A program generated an acess violation at 0004d8a9
 install.exe 0004:0000d8a9
 P1=00000008 P2=000000a0 P3=xxxxxxxx P4=xxxxxxxx  EAX=00000000
 EBX=00000004 ECX=00000005 EDX=bed80127
 ESI=00000d22 EDI=00005628
 DS=008f  DSACC=00f3  DSLIM=0000d12f
 ES=0127  ESACC=00f3 ESLIM=00000d22
 FS=150b  FSACC=00f3  FSLIM=00000030
 GS=0000 GSACC=****  GSLIM=********
 CS:EIP=0027:0000d8a9 CSACC=00fb CSLIM=0000daa9
 SS:EIP=008f:0000a7d2 SSACC=00f3  SSLIM=0000d12f
 EBP=0000a7e8 FLG=00012246
 *************** SYS3175 32-bit End ***********

SUMMARY OF RESOLUTION

Contact Zeos Technical Support for Bios Upgrade Information.

DETAILS OF RESOLUTION

If a system has a Flash Bios Version less than V9.0, user needs to upgrade his Bios to 9.0 which can be downloaded from Zeos Bulletin Board System at 612-362-1219. Once the bios is upgraded, the hardware settings for IDE drive in CMOS should be configured as following.

Multi Sector = Disable
Pre Set      = Disable
LBA          = Enable

For more info, please contact Zeos Technical Support.

Source

ftp://software.watson.ibm.com/pub/os2/info/zeos90.txt

Return to The Hardware Shelf