DaniATAPI.FLT r0.3.0 (Posted by Achim Hasenmueller) (js)
Also DaniATAPI.FLT has been updated by Daniela Engert:
-can deal with the ATAPI ZIP-250
-improved ZIP performance (up to factor 4 on ZIP-250)
-supports arbitrary swapping of 100MB and 250MB media
-reflects the current media capacity up to FDISK, DISKIO or the like
-OS/2 boot from ZIP is possible
-faster 32bit PIO in conjunction with DANIS506.ADD (rel. 1.1.1 or later)
-Busmaster DMA mode works and is tested with Intel, VIA, AMD, HPT, SiS and
-CMD chipsets until now. Busmaster DMA is available now for ALi as well
-(CD/DVD-ROM is safe, but some chip revisions fail on DMA write operations!). Due to hardware limitations there is no 32bit PIO and no busmaster
-DMA possible for ATAPI devices attached to a Promise Ultra controller.
-ATAPI devices appear to the rest of the system as regular SCSI-2 devices if used with DANIS506.ADD (rel. 1.1.5 or later). This may be disabled globally
or individually.
-advanced "hot-swap" support if used with DANIS506.ADD (rel. 1.1.9 or later)
-support for PCCard (formerly: PCMCIA) ATAPI devices (like the Iomega PCMCIA ZIP-250 or the Iomega Click!40)
-the translation of old-style 6-byte SCSI commands into their more modern 10-byte counterparts is no longer hardcoded. The device is sensed now to check if it requires this translation.
-like DaniS506.ADD, this driver stores boot messages internally for later readout. To view them, issue "copy ATAPI$ con:", to dump them into a file,issue "copy ATAPI$ anyfile".
-automatic media unload on shutdown if desired
http://hobbes.nmsu.edu/cgi-bin/h-search?key=daniatapi.zip